scholarly journals Combustion and Emissions Characteristics of the Turbine Engine Fueled with HEFA Blends from Different Feedstocks

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1277 ◽  
Author(s):  
Bartosz Gawron ◽  
Tomasz Białecki ◽  
Anna Janicka ◽  
Tomasz Suchocki
Keyword(s):  
Fatty Acids ◽  
Fuel Consumption ◽  
Alternative Fuels ◽  
Engine Performance ◽  
Component Composition ◽  
Research Area ◽  
Jet Fuel ◽  
Turbine Engines ◽  
Turbine Engine ◽  
Performance And Emission

In the next decade, due to the desire for significant reduction in the carbon footprint left by the aviation sector and the development of a sustainable alternatives to petroleum, fuel from renewable sources will play an increasing role as a propellant for turbine aircraft engines. Currently, apart from five types of jet fuel containing synthesized hydrocarbons that are certified by the ASTM D7566 standard, there is yet another synthetic blending component that is at the stage of testing and certification. Hydroprocessed esters and fatty acids enable the production of a synthetic component for jet fuel from any form of native fat or oil. Used feedstock affects the final synthetic blending component composition and consequently the properties of the blend for jet fuel and, as a result, the operation of turbine engines. A specialized laboratory test rig with a miniature turbojet engine was used for research, which is an interesting alternative to complex and expensive tests with full scale turbine engines. The results of this study revealed the differences in the parameters of engine performance and emission characteristics between tested fuels with synthetic blending components and neat jet fuel. The synthetic blending component was obtained from two different feedstock. Noticeable changes were obtained for fuel consumption, CO and NOx emissions. With the addition of the hydroprocessed esters and fatty acids (HEFA) component, the fuel consumption and CO emissions decrease. The opposite trend was observed for NOx emission. The tests presented in this article are a continuation of the authors’ research area related to alternative fuels for aviation.

Hydroprocessed Renewable Jet Fuel Evaluation, Performance, and Emissions in a T-63 Turbine Engine

2011 ◽  
Author(s):  
Christopher D. Klingshirn ◽  
Matthew J. DeWitt ◽  
Rich Striebich ◽  
David Anneken ◽  
Linda Shafer ◽  
...  
Keyword(s):  
Air Force ◽  
Alternative Fuels ◽  
Engine Performance ◽  
Aviation Fuel ◽  
Fuel Blend ◽  
Turbine Engine ◽  
Performance And Emission ◽  
Term Operation ◽  
Fuel Blends ◽  
Aromatic Components

Due to potential beneficial environmental impacts and increased supply availability, alternative fuels derived from renewable resources are evolving on the forefront as unconventional substitutes for fossil fuel. Focus is being given to the evaluation and certification of Hydroprocessed Renewable Jet (HRJ), a fuel produced from animal fat and/or plant oils (triglycerides) by hydroprocessing, as the next potential synthetic aviation fuel. Extensive efforts have recently been performed at the Air Force Research Laboratory (AFRL) at Wright Patterson Air Force Base (WPAFB) to evaluate the potential of two HRJ fuels produced from camelina and tallow feedstocks. These have included characterization of the fuel chemical and physical fuel characteristics, and Fit-for-Purpose properties (FFP). The present effort describes general combustion performance and emission propensity of a T63-A-700 Allison turbine engine operated on the HRJs and 50/50 (by volume) HRJ/JP-8 fuel blends relative to a specification JP-8. In addition, engine and emission testing with a blend of the tallow-derived HRJ and 16% bio-derived aromatic components was completed. Fundamental engine performance characterization allows for determination of the suitability of potential synthetic fuels while quantitation of gaseous and particulate matter emissions provides an assessment of the potential environmental impact compared to current petroleum-derived fuels. In addition, an extended 150 hour endurance test was performed using a 50/50 blend of tallow-derived HRJ with JP-8 to evaluate the long-term operation of the engine with the synthetic fuel blend. This paper discusses the laboratory testing performed to characterize HRJs and results from the basic engine operability and emissions studies of the alternative fuel blends.

scholarly journals The impact of physico-chemical properties of the jet fuel and biofuels on the characteristics of gas-turbine engines

2019 ◽  
Vol 22 (6) ◽  
pp. 8-16
Author(s):  
Sh. Ardeshiri
Keyword(s):  
Mathematical Model ◽  
Gas Turbine ◽  
Alternative Fuels ◽  
Gas Turbine Engine ◽  
Jet Fuel ◽  
Civil Aviation ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Turbine Engine ◽  
The Impact

The current development trend of global civil aviation is the growth of passenger and freight traffic, which entails the consumption of jet fuel. Under these conditions, increasing the efficiency of jet fuel used is of great importance. Global energy consumption is constantly growing, and, first of all, the question of diversification of oil resources arises, resources from which the bulk of motor fuels is produced. Other types of raw energy sources (natural gas, coal, bio-mass) currently account for only a small part. However, an analysis of the development of jet fuels indicates that work is underway to obtain these from other sources of raw materials, especially bio-fuels. Much attention is given to obtaining bio-fuels from renewable sources – such as algae. The issue of the mass transition of civil aviation to alternative fuels is complex and requires the solution of intricate technical as well as economic issues. One of these is the assessment of the impact of new fuels on GTE performance. It is important to give an objective and quick assessment of the use of various types of fuels on the main characteristics of the engine – i.e., throttle and high-speed characteristics. In this case, it is necessary to take into account chemical processes in the chemical composition of new types of fuel. To assess the effect of fuels on the characteristics of a gas turbine engine, it is proposed to use a mathematical model that would take into account the main characteristics of the fuel itself. Therefore, the work proposes a mathematical model for calculating the characteristics of a gas turbine engine taking into account changes in the properties of the fuel itself. A comparison is made of the percentage of a mixture of biofuels and JetA1 kerosene, as well as pure JetA1 and TC-1 kerosene. The calculations, according to the proposed model, are consistent with the obtained characteristics of a gas turbine engine in operation when using JetA1 and TC-1 kerosene. Especially valuable are the obtained characteristics of a gas turbine engine depending on a mixture of biofuel and kerosene. It was found that a mixture of biofuel and kerosene changes the physicochemical characteristics of fuel and affects the change in engine thrust and specific fuel consumption. It is shown that depending on the obtained physicochemical properties of a mixture of biofuel and kerosene, it is possible to increase the fuel efficiency and environmental friendliness of the gas turbine engines used.

scholarly journals Effect of Methanol/Water Mixed Fuel Compound Injection on Engine Combustion and Emissions

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4491
Author(s):  
Changchun Xu ◽  
Haengmuk Cho
Keyword(s):  
Fuel Consumption ◽  
Ignition Delay ◽  
Fuel Injection ◽  
Fuel Efficiency ◽  
Engine Performance ◽  
Hydroxyl Group ◽  
Combustion Mechanism ◽  
Performance And Emission ◽  
Reduce Emissions ◽  
Concentration Ratios

Due to the recent global increase in fuel prices, to reduce emissions from ground transportation and improve urban air quality, it is necessary to improve fuel efficiency and reduce emissions. Water, methanol, and a mixture of the two were added at the pre-intercooler position to keep the same charge and cooling of the original rich mixture, reduce BSFC and increase ITE, and promote combustion. The methanol/water mixing volume ratios of different fuel injection strategies were compared to find the best balance between fuel consumption, performance, and emission trends. By simulating the combustion mechanism of methanol, water, and diesel mixed through the Chemkin system, the ignition delay, temperature change, and the generation rate of the hydroxyl group (−OH) in the reaction process were analyzed. Furthermore, the performance and emission of the engine were analyzed in combination with the actual experiment process. This paper studied the application of different concentration ratios of the water–methanol–diesel mixture in engines. Five concentration ratios of water–methanol blending were injected into the engine at different injection ratios at the pre-intercooler position, such as 100% methanol, 90% methanol/10% water, 60% methanol/40% water, 30% methanol/70% water, 100% water was used. With different volume ratios of premixes, the combustion rate and combustion efficiency were affected by droplet extinguishment, flashing, or explosion, resulting in changes in combustion temperature and affecting engine performance and emissions. In this article, the injection carryout at the pre-intercooler position of the intake port indicated thermal efficiency increase and a brake specific fuel consumption rate decrease with the increase of water–methanol concentration, and reduce CO, UHC, and nitrogen oxide emissions. In particular, when 60% methanol and 40% water were added, it was found that the ignition delay was the shortest and the cylinder pressure was the largest, but the heat release rate was indeed the lowest.

Design, Development and Application of Vehicle Gas Turbine Engines

1966 ◽  
Vol 181 (1) ◽  
pp. 149-172
Author(s):  
P. A. Phillips ◽  
Peter Spear
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Low Cost ◽  
Engine Performance ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Design Development ◽  
Turbine Engine ◽  
Wide Range ◽  
Cycle Temperature

After briefly summarizing worldwide automotive gas turbine activity, the paper analyses the power plant requirements of a wide range of vehicle applications in order to formulate the design criteria for acceptable vehicle gas turbines. Ample data are available on the thermodynamic merits of various gas turbine cycles; however, the low cost of its piston engine competitor tends to eliminate all but the simplest cycles from vehicle gas turbine considerations. In order to improve the part load fuel economy, some complexity is inevitable, but this is limited to the addition of a glass ceramic regenerator in the 150 b.h.p. engine which is described in some detail. The alternative further complications necessary to achieve satisfactory vehicle response at various power/weight ratios are examined. Further improvement in engine performance will come by increasing the maximum cycle temperature. This can be achieved at lower cost by the extension of the use of ceramics. The paper is intended to stimulate the design application of the gas turbine engine.

Characteristics of Water-in-Diesel Emulsions in a Single Cylinder Compression Ignition Engine

2014 ◽  
Author(s):  
Teja Gonguntla ◽  
Robert Raine ◽  
Leigh Ramsey ◽  
Thomas Houlihan
Keyword(s):  
Fuel Consumption ◽  
Direct Injection ◽  
Engine Performance ◽  
Operating Conditions ◽  
Specific Fuel Consumption ◽  
Brake Specific Fuel Consumption ◽  
Compression Ignition Engine ◽  
Oil Emulsion ◽  
Single Cylinder ◽  
Performance And Emission

The objective of this project was to develop both engine performance and emission profiles for two test fuels — a 6% water-in-diesel oil emulsion (DOE-6) fuel and a neat diesel (D100) fuel. The testing was performed on a single cylinder, direct-injection, water-cooled diesel engine coupled to an eddy current dynamometer. Output parameters of the engine were used to calculate Brake Specific Fuel Consumption (BSFC) and Engine Efficiency (η) for each test fuel. DOE-6 fuels generated a 24% reduction in NOX and a 42% reduction in Carbon Monoxide emissions over the tested operating conditions. DOE-6 fuels presented higher ignition delays — between 1°-4°, yielded 1%–12% lower peak cylinder pressures and produced up to 5.5% lower exhaust temperatures. Brake Specific Fuel consumption increased by 6.6% for the DOE-6 fuels as compared to the D100 fuels. This project is the first research done by a New Zealand academic institution on water-in-diesel emulsion fuels.

Performance and Emission Test of Different Mixtures of Oils with Diesel Using Twin Cylinder Four Stroke Diesel Engine

2015 ◽  
Vol 787 ◽  
pp. 751-755
Author(s):  
P. Vithya ◽  
V. Logesh
Keyword(s):  
Diesel Engine ◽  
Alternative Fuels ◽  
Fossil Fuel ◽  
Engine Performance ◽  
Emission Analysis ◽  
Performance And Emission ◽  
Cashew Nut ◽  
Oil Mixtures ◽  
Cashew Nut Shell ◽  
Camphor Oil

The use of fossil fuel is increasing drastically due to its consumption in all consumer activities. The utility of fossil fuel depleted its existence, degraded the environment and led to reduction in underground carbon resources. Hence the search for alternative fuels is paying attention for making sustainable development, energy conservation, efficiency and environmental preservation. The worldwide reduction of underground carbon resources can be substituted by the bio-fuels. The researchers around the world are finding the alternate fuel that should have the least impact on the environment degradation. This paper aims at finding an alternative for diesel and reducing the pressure on its existing demand. This study aimed at using two types of oil mixtures namely cashew nut shell oil and camphor oil mixed with diesel, turpentine oil mixed with diesel in different proportions as fuel in twin cylinder four stroke diesel engine. Performance and emission analysis have been performed by using exhaust gas analyzer in the oil samples. It was observed that 40% cashew nut shell oil and 10%camphor oil mixed with 50% diesel, 50% turpentine oil mixed with 50% diesel shows the better engine performance and also less emissions.

Experimental Investigations of Performance and Emission Characteristics of Moringa Oil Methyl Ester and Its Diesel Blends in a Single Cylinder Direct Injection Diesel Engine

2009 ◽  
Author(s):  
Shyamsundar Rajaraman ◽  
G. K. Yashwanth ◽  
T. Rajan ◽  
R. Siva Kumaran ◽  
P. Raghu
Keyword(s):  
Diesel Engine ◽  
Alternative Fuels ◽  
Methyl Esters ◽  
Direct Injection ◽  
Engine Performance ◽  
Experimental Investigations ◽  
Emission Analysis ◽  
Performance And Emission ◽  
Direct Injection Diesel Engine ◽  
Moringa Oil

World at present is confronted with the twin crisis of fossil fuel depletion and environmental pollution. Rapid escalation in prices and hydrocarbon resources depletion has led us to look for alternative fuels, which can satisfy ever increasing demands of energy as well as protect the environment from noxious pollutants. In this direction an attempt has been made to study a biodiesel, namely Moringa Oil Methyl Esters [MOME]. All the experiments were carried out on a 4.4 kW naturally aspirated stationary direct injection diesel engine coupled with a dynamometer to determine the engine performance and emission analysis for MOME. It was observed that there was a reduction in HC, CO and PM emissions along with a substantial increase in NOx. MOME and its blends had slightly lower thermal efficiency than diesel oil.

scholarly journals Investigation of Micro Gas Turbine Systems for High Speed Long Loiter Tactical Unmanned Air Systems

Aerospace ◽  
2019 ◽  
Vol 6 (5) ◽  
pp. 55 ◽  
Author(s):  
James Large ◽  
Apostolos Pesyridis
Keyword(s):  
Gas Turbine ◽  
Fuel Consumption ◽  
High Speed ◽  
Engine Performance ◽  
Operating Conditions ◽  
Turbine Engine ◽  
Micro Gas Turbine ◽  
Fan Speed ◽  
Relative Design ◽  
Design Simplicity

In this study, the on-going research into the improvement of micro-gas turbine propulsion system performance and the suitability for its application as propulsion systems for small tactical UAVs (<600 kg) is investigated. The study is focused around the concept of converting existing micro turbojet engines into turbofans with the use of a continuously variable gearbox, thus maintaining a single spool configuration and relative design simplicity. This is an effort to reduce the initial engine development cost, whilst improving the propulsive performance. The BMT 120 KS micro turbojet engine is selected for the performance evaluation of the conversion process using the gas turbine performance software GasTurb13. The preliminary design of a matched low-pressure compressor (LPC) for the proposed engine is then performed using meanline calculation methods. According to the analysis that is carried out, an improvement in the converted micro gas turbine engine performance, in terms of thrust and specific fuel consumption is achieved. Furthermore, with the introduction of a CVT gearbox, the fan speed operation may be adjusted independently of the core, allowing an increased thrust generation or better fuel consumption. This therefore enables a wider gamut of operating conditions and enhances the performance and scope of the tactical UAV.

On-Site Emissions and Fuel Consumption Measurement to Compare Locomotive Fuel Injector Performance

2006 ◽  
Author(s):  
W. Scott Wayne ◽  
Ryan A. Barnett ◽  
Jeffrey M. Cutright ◽  
Ted E. Stewart
Keyword(s):  
West Virginia ◽  
Fuel Consumption ◽  
Alternative Fuels ◽  
Engine Performance ◽  
Combustion Efficiency ◽  
Fuel Injector ◽  
West Virginia University ◽  
Test Procedures ◽  
Fuel Injectors ◽  
Locomotive Engine

As part of the Norfolk-Southern Railroad’s on-going investigation into fuel consumption reductions for their fleet of 3000 locomotives, the Center for Alternative Fuels, Engines and Emissions at West Virginia University conducted on-site locomotive engine performance and emissions measurements to characterize the performance, fuel consumption and emissions associated with fuel injectors from two injector suppliers. Emissions and fuel consumption were measured using the West Virginia University Transportable Locomotive Emissions Testing Laboratory, which was set up at the Norfolk-Southern Heavy Repair Facility in Roanoke, Virginia. The tests were conducted to evaluate potential emissions and fuel consumption differences between two fuel injector suppliers using an EMD GP38-2 locomotive equipped with a 2100 hp (1566 kW), 16-cylinder, EMD 16-645E engine. The test locomotive engine was freshly overhauled and certified to the EPA locomotive Tier 0 emissions standards. Emissions and fuel consumption measurements were conducted according to the Federal Test Procedures defined in the Code of Federal Regulations 40CFR Part 92 Subpart B [1]. The engine was first tested in the “as overhauled” configuration with the OEM fuel injectors to establish the baseline emissions and fuel consumption. The baseline FTP results confirmed that this locomotive was in compliance with the Federal Tier 0 emissions standards. The OEM specification fuel injectors were replaced with “Fuel Saver” injectors designed and manufactured by an aftermarket injector supplier referred to in this paper as Supplier B. The Supplier B injectors reduced fuel consumption on the average of 2–4% for each notch, except for Notch 4 and Low Idle. However, the Supplier B injectors increased the NOx levels by 20–30% for almost every notch, which is an expected result due to the improved combustion efficiency.

Performance and emission characteristics of turbocharged diesel engine fueled with palm biodiesel blends

2018 ◽  
Vol 7 (3) ◽  
pp. 1040
Author(s):  
Byungmo Yang ◽  
M A. Kalam ◽  
Haengmuk Cho
Keyword(s):  
Alternative Fuels ◽  
Fossil Fuels ◽  
Engine Performance ◽  
Alternative Fuel ◽  
Performance And Emission ◽  
Crude Oil Prices ◽  
Gas Measurement ◽  
Consumption Rates ◽  
Hc Emissions ◽  
Main Component

The exhaustion of fossil fuels and sharp rise in crude oil prices has led to the development of various alternative fuels. Alternative fuels are a necessity to meet rising energy consumption rates and to ensure eco-friendly growth. Alternative fuels that can be regenerated, are sustainable and have clean burning capacity to help promote an eco-friendly development. Whereas there have been various ideas and technologies relating to biodiesel as an alternative fuel, these tend to be restricted to the distant future insofar as compression-ignition engines are concerned. Biodiesel, produced by reacting triglycerides which are the main component of animal or plant-based fatty acids with methanol, is known to be an eco-friendly alternative fuel that can take the place of conventional petroleum diesel. In the present study, biodiesel (palm oil) was mixed at a certain ratio with commercially sold diesel, then introduced into a TCDI engine which was run at low load conditions for engine performance and exhaust gas measurement. Both engine output and torque were reduced, and fuel consumption increased to make up for the reduction in output. There were slight reductions in NOx and CO2 emissions, but changes in CO and HC emissions were negligible.  

Sign in / Sign up

Export Citation Format

Share Document