scholarly journals Universal Power Flow Algorithm for Bipolar Multi-Terminal VSC-HVDC

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1053
Author(s):  
Zhou Li ◽  
Yan He ◽  
Ting-Quan Zhang ◽  
Xiao-Ping Zhang
Keyword(s):  
Steady State ◽  
Power Flow ◽  
Control Strategies ◽  
Short Circuit ◽  
Operating Conditions ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Detailed Calculation ◽  
Negative Pole ◽  
Flow Algorithm

An effective and accurate power flow algorithm provides control references for active power dispatch and initial steady state operating points, used for stability analysis, short-circuit calculations, and electromagnetic transient simulations, which is not only a fundamental precondition to analyze the system operating conditions, but also the basis to improve the accuracy of power flow and DC voltage control of the multi-terminal voltage source converter-based high voltage direct current (VSC-HVDC). This paper proposes a nodal voltage-based universal steady-state power flow algorithm for the newly-developed bipolar multi-terminal VSC-HVDC (VSC-MTDC). Firstly, as the positive-pole and negative-pole DC network of the bipolar VSC-MTDC can be operated individually, a bipolar power flow alternating iterative method is proposed here to obtain the positive/negative-pole DC network power flow. Secondly, a series of nodal equivalent methods involving various control strategies are proposed for the universal power flow algorithm. Then the detailed calculation procedure and a general MATLAB(TM) program for the universal power flow algorithm is presented. A typical 4-terminal bipolar VSC-MTDC system was built in the PSCAD/EMTDC to verify the validity of the proposed algorithm, and the results are discussed here. Moreover, the calculation results of more complex bipolar VSC-MTDC systems under different operating conditions, employing the proposed universal power flow algorithm, are presented to illustrate its universality and efficiency.

Improved Power Flow Algorithm Incorporating Multi-Terminal VSC-HVDC

2011 ◽  
Vol 383-390 ◽  
pp. 2188-2194 ◽  
Author(s):  
Fang Ye ◽  
Zhi Nong Wei ◽  
Guo Qiang Sun
Keyword(s):  
Steady State ◽  
Power Flow ◽  
Power Transmission ◽  
Conventional Technique ◽  
Test System ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Mathematical Form ◽  
Flow Algorithm ◽  
Set Up

Voltage Source Converter (VSC) based High Voltage Direct Current (HVDC) technology is a newly deve- loped power transmission technology. The basic principle and structure of multi-terminal VSC-HVDC is introduced and its steady-state mathematical model is set up. An improved power flow algorithm is deduced, which not only decouple the relationship between AC and DC systems’ variables in the strict mathematical form, but also can be integrated with the conventional power flow program and exhibit good accuracy and convergence characteristics compared to conventional technique. A numerical example of IEEE 14-bus test system with a 3-terminal VSC-HVDC network is given. The results show that the proposed steady-state model of multi-terminal VSC-HVDC and corresponding power flow algorithm are correct and effective.

scholarly journals Research on Serial VSC-LCC Hybrid HVdc Control Strategy and Filter Design Scheme

Energies ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2260
Author(s):  
Fan Cheng ◽  
Lijun Xie ◽  
Zhibing Wang
Keyword(s):  
Reactive Power ◽  
Filter Design ◽  
Control Strategies ◽  
Short Circuit ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Level Control ◽  
Hvdc System ◽  
High Voltage Direct Current ◽  
Design Scheme

This paper investigated the characteristics of a novel type of hybrid high voltage direct current (HVdc) converter, which is composed by line commutated converter series with voltage source converter. The system and valve level control strategies are introduced, which can provide ac system voltage support. A novel filter design scheme composed by resonant filers for hybrid HVdc are also proposed, which can decrease the capacity of reactive power compensation equipment without deteriorate harmonic characteristics. The ac voltage of HVdc fluctuation level caused by transmitted power variation will be effectively reduced, with the coordination between filter design scheme and converter control. In addition, the influence of ac grid strength is also analyzed by equivalent source internal impedance represented by short circuit ratio (SCR). Finally, the +800 kV/1600 MW hybrid HVdc system connecting two ac grids under different SCR cases are studied, and the PSCAD/EMTDC simulation results have validated the effectiveness for proposed strategy.

scholarly journals Dynamic Modeling of HVDC for Power System Stability Assessment: A Review, Issues, and Recommendations

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4829
Author(s):  
Tarek Abedin ◽  
M. Shahadat Hossain Lipu ◽  
Mahammad A. Hannan ◽  
Pin Jern Ker ◽  
Safwan A. Rahman ◽  
...  
Keyword(s):  
Steady State ◽  
Dynamic Modeling ◽  
Direct Current ◽  
Current Source ◽  
Computational Cost ◽  
Operating Conditions ◽  
System Stability ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Stability Assessment

High-voltage direct current (HVDC) has received considerable attention due to several advantageous features such as minimum transmission losses, enhanced stability, and control operation. An appropriate model of HVDC is necessary to assess the operating conditions as well as to analyze the transient and steady-state stabilities integrated with the AC networks. Nevertheless, the construction of an HVDC model is challenging due to the high computational cost, which needs huge ranges of modeling experience. Therefore, advanced dynamic modeling of HVDC is necessary to improve stability with minimum power loss. This paper presents a comprehensive review of the various dynamic modeling of the HVDC transmission system. In line with this matter, an in-depth investigation of various HVDC mathematical models is carried out including average-value modeling (AVM), voltage source converter (VSC), and line-commutated converter (LCC). Moreover, numerous stability assessment models of HVDC are outlined with regard to stability improvement models, current-source system stability, HVDC link stability, and steady-state rotor angle stability. In addition, the various control schemes of LCC-HVDC systems and modular multilevel converter- multi-terminal direct current (MMC-MTDC) are highlighted. This paper also identifies the key issues, the problems of the existing HVDC models as well as providing some selective suggestions for future improvement. All the highlighted insights in this review will hopefully lead to increased efforts toward the enhancement of the modeling for the HVDC system.

scholarly journals Operation Zone Analysis of the Voltage Source Converter Based on the Influence of Different Grid Strengths

Symmetry ◽  
2022 ◽  
Vol 14 (1) ◽  
pp. 153
Author(s):  
Wenning Wang ◽  
Kejun Li ◽  
Kaiqi Sun ◽  
Jianjian Wang
Keyword(s):  
Renewable Energy ◽  
Control Strategies ◽  
Short Circuit ◽  
Vector Current ◽  
Current Control ◽  
Voltage Source ◽  
Synchronization Control ◽  
Voltage Source Converter ◽  
Operating Stability ◽  
The Stability

With the increasing penetration of renewable energy into the power system, the voltage source converter (VSC) for integrating renewable energy has become the most common device in the electric network. However, the operating stability of the VSC is strongly dependent on its operating control strategy, which is also highly related to the strength of the AC system. Choosing the control strategy of VSC for different strengths of AC systems becomes an essential issue for maintaining the symmetry between high proportion of renewable energy integration and stable operation of AC system. In order to obtain the operation zones of the control strategies of the VSC under different strengths of AC system, in this paper, the two common VSC control strategies, vector current control (VCC) and power synchronization control (PSC), are compared. Firstly, the principle of VCC and PSC are introduced. Then, based on the short circuit ratio (SCR) and the power limit calculation under steady-state conditions of the VSC, the operation zones of the vector current control and power synchronization control are proposed. Finally, a medium voltage modular multilevel converter (MMC) system was built in PSCAD/EMTDC and the proposed operation zones of the VCC and PSC were tested by changing the SCR of the modified IEEE 33 bus system and analyzed via the critical short circuit ratio (CSCR) analysis, the small-signal stability analysis, and transient stability analysis. The results indicate that, as the SCR decreases, the VSC based on VCC is gradually worked into unstable conditions, while the stability of VSC based on PSC gradually increases. The analysis results provide a criterion for the converter operation strategy change that could significantly improve the operating stability of the VSC in the power system and realize the symmetry of the stability of the converter and the change of the strength of the AC system.

Adaptive SRF-PLL Based Voltage and Frequency Control of Hybrid Standalone WECS with PMSG-BESS

2018 ◽  
Vol 19 (6) ◽  
Author(s):  
Anjana Jain ◽  
R. Saravanakumar ◽  
S. Shankar ◽  
V. Vanitha
Keyword(s):  
Reactive Power ◽  
Frequency Control ◽  
Storage System ◽  
Synchronous Generator ◽  
Energy Storage System ◽  
Voltage Regulation ◽  
Operating Conditions ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Control Scheme

Abstract The variable-speed Permanent Magnet Synchronous Generator (PMSG) based Wind Energy Conversion System (WECS) attracts the maximum power from wind, but voltage-regulation and frequency-control of the system in standalone operation is a challenging task A modern-control-based-tracking of power from wind for its best utilization is proposed in this paper for standalone PMSG based hybrid-WECS comprising Battery Energy Storage System (BESS). An Adaptive Synchronous Reference Frame Phase-Locked-Loop (SRF-PLL) based control scheme for load side bi-directional voltage source converter (VSC) is presented for the system. MATLAB/Simulink model is developed for simulation study for the proposed system and the effectiveness of the controller for bi-directional-converter is discussed under different operating conditions: like variable wind-velocity, sudden load variation, and load unbalancing. Converter control scheme enhances the power smoothening, supply-load power-matching. Also it is able to regulate the active & reactive power from PMSG-BESS hybrid system with control of fluctuations in voltage & frequency with respect to varying operating conditions. Proposed controller successfully offers reactive-power-compensation, harmonics-reduction, and power-balancing. The proposed scheme is based on proportional & integral (PI) controller. Also system is experimentally validated in the laboratory-environment and results are presented here.

scholarly journals Coordinated Control System between Grid–VSC and a DC Microgrid with Hybrid Energy Storage System

Electronics ◽  
2021 ◽  
Vol 10 (21) ◽  
pp. 2699
Author(s):  
Miguel Montilla-DJesus ◽  
Édinson Franco-Mejía ◽  
Edwin Rivas Trujillo ◽  
José Luis Rodriguez-Amenedo ◽  
Santiago Arnaltes
Keyword(s):  
Control Strategy ◽  
Power Flow ◽  
Storage System ◽  
Coordinated Control ◽  
Energy Storage System ◽  
Voltage Regulation ◽  
Electrical Network ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Dc Microgrid

Direct current microgrids (DCMGs) are currently presented as an alternative solution for small systems that feed sensitive electrical loads into DC. According to the scientific literature, DCMG maintains good voltage regulation. However, when the system is in islanded mode, very pronounced voltage variations are presented, compromising the system’s ability to achieve reliable and stable energy management. Therefore, the authors propose a solution, connecting the electrical network through a grid-tied voltage source converter (GVSC) in order to reduce voltage variations. A coordinated control strategy between the DCMG and GVSC is proposed to regulate the DC voltage and find a stable power flow between the various active elements, which feed the load. The results show that the control strategy between the GVSC and DCMG, when tested under different disturbances, improves the performance of the system, making it more reliable and stable. Furthermore, the GVSC supports the AC voltage at the point of common coupling (PCC) without reducing the operating capacity of the DCMG and without exceeding even its most restrictive limit. All simulations were carried out in MATLAB 2020.

scholarly journals Improvement of Power Quality Considering Voltage Stability in Grid Connected System by FACTS Devices

2013 ◽  
pp. 182-187
Author(s):  
Sarika D. Patil
Keyword(s):  
Power Generation ◽  
Wind Power ◽  
Power Flow ◽  
Voltage Stability ◽  
Low Voltage ◽  
Wind Power Generation ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Induction Generators ◽  
Facts Devices

Recently the wind power generation has attracted special interest and many wind power stations are being in service in the world. In the wind turbine that mostly uses induction generators, tend to drain large amounts of Vars from the grid, potentially causing low voltage and may be voltage stability problems for the utility owner, especially in the case of large load variation on distribution feeder. Voltage-source converter based various FACTS devices have been used for flexible power flow control, secure loading and damping of power system oscillations. Some of those are used also to improve transient and dynamic stability of the wind power generation (WPGS).

Sign in / Sign up

Export Citation Format

Share Document