scholarly journals Pulsating Flow of CNT–Water Nanofluid Mixed Convection in a Vented Trapezoidal Cavity with an Inner Conductive T-Shaped Object and Magnetic Field Effects

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 848 ◽  
Author(s):  
Ali J. Chamkha ◽  
Fatih Selimefendigil ◽  
Hakan F. Oztop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Mixed Convection ◽  
Steady Flow ◽  
Average Nusselt Number ◽  
Pulsating Flow ◽  
Cavity Wall ◽  
Magnetic Field Effects ◽  
Field Effects

Mixed convection of carbon-nanotube/water nanofluid in a vented cavity with an inner conductive T-shaped object was examined under pulsating flow conditions under magnetic field effects with finite element method. Effects of different parameters such as Richardson number (between 0.05 and 50), Hartmann number (between 0 and 30), cavity wall inclination (between 0 ∘ and 10 ∘ ), size (between 0.1 H and 0.4 H) and orientation (between −90 ∘ and 90 ∘ ) of the T-shaped object, and amplitude (between 0.5 and 0.9) and frequency (Strouhal number between 0.25 and 5) of pulsating flow on the convective flow features were studied. It was observed that the average Nusselt number enhanced with the rise of strength of magnetic field, solid nanoparticle volume fraction, and amplitude of the pulsation, while the effect was opposite for higher values of Ri number and cavity wall inclination angle. The presence of the T-shaped object and adjusting its size and orientation had significant impact on the main flow stream from inlet to outlet and recirculations around the T-shaped object and in the vicinity of hot wall of the cavity along with the magnetic field strength. Pulsating flow resulted in heat transfer enhancement as compared to steady flow case for all configurations. However, the amount of increment was different depending on the variation of the parameters of interest. Heat transfer enhancements were 41.85% and 20.81% when the size of the T-shaped object was increased from 0.1 H to 0.4 H. The T-shaped object can be utilized in the vented cavity as an excellent tool for convective heat transfer control. As highly conductive CNT particles were used in water, significant enhancements in the average Nusselt number between 97% and 108% were obtained both in steady flow and in pulsating flow cases when magnetic field was absent or present.

scholarly journals Effects of a Rotating Cone on the Mixed Convection in a Double Lid-Driven 3D Porous Trapezoidal Nanofluid Filled Cavity under the Impact of Magnetic Field

Nanomaterials ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 449 ◽  
Author(s):  
Ali J. Chamkha ◽  
Fatih Selimefendigil ◽  
Hakan F. Oztop
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Aspect Ratio ◽  
Mixed Convection ◽  
Average Nusselt Number ◽  
Volume Fraction ◽  
Rotational Velocity ◽  
Rotating Cone ◽  
The Impact

Effects of a rotating cone in 3D mixed convection of CNT-water nanofluid in a double lid-driven porous trapezoidal cavity is numerically studied considering magnetic field effects. The numerical simulations are performed by using the finite element method. Impacts of Richardson number (between 0.05 and 50), angular rotational velocity of the cone (between −300 and 300), Hartmann number (between 0 and 50), Darcy number (between 10 − 4 and 5 × 10 − 2 ), aspect ratio of the cone (between 0.25 and 2.5), horizontal location of the cone (between 0.35 H and 0.65 H) and solid particle volume fraction (between 0 and 0.004) on the convective heat transfer performance was studied. It was observed that the average Nusselt number rises with higher Richardson numbers for stationary cone while the effect is reverse for when the cone is rotating in clockwise direction at the highest supped. Higher discrepancies between the average Nusselt number is obtained for 2D cylinder and 3D cylinder configuration which is 28.5% at the highest rotational speed. Even though there are very slight variations between the average Nu values for 3D cylinder and 3D cone case, there are significant variations in the local variation of the average Nusselt number. Higher enhancements in the average Nusselt number are achieved with CNT particles even though the magnetic field reduced the convection and the value is 84.3% at the highest strength of magnetic field. Increasing the permeability resulted in higher local and average heat transfer rates for the 3D porous cavity. In this study, the aspect ratio of the cone was found to be an excellent tool for heat transfer enhancement while 95% enhancements in the average Nusselt number were obtained. The horizontal location of the cone was found to have slight effects on the Nusselt number variations.

Convective Heat Transfer Utilizing Magnetic Nanoparticles in the Presence of a Sloping Magnetic Field Inside a Square Enclosure

2019 ◽  
Vol 11 (4) ◽  
Author(s):  
Latifa M. Al-Balushi ◽  
M. M. Rahman
Keyword(s):  
Magnetic Field ◽  
Heat Transfer ◽  
Nusselt Number ◽  
Magnetic Nanoparticles ◽  
Shear Rate ◽  
Average Nusselt Number ◽  
Hartmann Number ◽  
The Other ◽  
Square Enclosure ◽  
Thermal Boundary Conditions

Unsteady natural convection flow and heat transfer utilizing magnetic nanoparticles in the presence of a sloping magnetic field inside a square enclosure are simulated numerically following nonhomogeneous dynamic model. Four different thermal boundary conditions: constant, parabolic in space, sinusoidally in space, and time for the bottom hot wall are considered. The top wall of the enclosure is cold while the vertical walls are thermally insulated. Galerkin weighted residual finite element method is used to solve the governing nondimensional partial differential equations. For simulations, 12 types of nanofluids consisting magnetite (Fe3O4), cobalt ferrite (CoFe2O4), Mn–Zn ferrite (Mn–ZnFe2O4), and silicon dioxide (SiO2) nanoparticles along with water, engine oil, and kerosene as base fluids are used. The effects of the important model parameters such as Hartmann number, magnetic field sloping angle, and thermal Rayleigh number on the flow fields are investigated. The results show that the average Nusselt number, shear rate, as well as the nanofluid velocity decreases as the Hartmann number intensifies. Moreover, the rate of heat transfer in nanofluid exaggerates with the increase of the thermal Rayleigh number and the magnetic field sloping angle. Sinusoidally varied in space thermal boundary condition at the bottom wall provides the highest average Nusselt number and the shear rate compared to the other types of thermal boundary conditions studied here. For this case, the highest average Nusselt number is obtained for the Mn–ZnFe2O4–Ke nanofluid. On the other hand, Fe3O4–H2O nanofluid delivers the highest shear rate compared to the other premeditated nanofluids.

Sign in / Sign up

Export Citation Format

Share Document