scholarly journals Energy Storage System Analysis Review for Optimal Unit Commitment

Energies ◽  
2019 ◽  
Vol 13 (1) ◽  
pp. 158 ◽  
Author(s):  
Harun Or Rashid Howlader ◽  
Oludamilare Bode Adewuyi ◽  
Ying-Yi Hong ◽  
Paras Mandal ◽  
Ashraf Mohamed Hemeida ◽  
...  

Energy storage systems (ESSs) are essential to ensure continuity of energy supply and maintain the reliability of modern power systems. Intermittency and uncertainty of renewable generations due to fluctuating weather conditions as well as uncertain behavior of load demand make ESSs an integral part of power system flexibility management. Typically, the load demand profile can be categorized into peak and off-peak periods, and adding power from renewable generations makes the load-generation dynamics more complicated. Therefore, the thermal generation (TG) units need to be turned on and off more frequently to meet the system load demand. In view of this, several research efforts have been directed towards analyzing the benefits of ESSs in solving optimal unit commitment (UC) problems, minimizing operating costs, and maximizing profits while ensuring supply reliability. In this paper, some recent research works and relevant UC models incorporating ESSs towards solving the abovementioned power system operational issues are reviewed and summarized to give prospective researchers a clear concept and tip-off on finding efficient solutions for future power system flexibility management. Conclusively, an example problem is simulated for the visualization of the formulation of UC problems with ESSs and solutions.

Inventions ◽  
2019 ◽  
Vol 4 (3) ◽  
pp. 38 ◽  
Author(s):  
Bouzounierakis ◽  
Katsigiannis ◽  
Fiorentzis ◽  
Karapidakis

Greece has a large number of islands that are isolated from the main interconnected Greek power system; however, a majority of them are to be interconnected in the mainland grid over the next decade. A large number of these islands present a significant amount of wind and solar potential. The nature of load demand and renewable production is stochastic; thus, the operation of such isolated power systems can be improved significantly by the installation of a large-scale energy storage system. The role of storage is to compensate for the long and short-term imbalances between power generation and load demand. Pumped hydro storage (PHS) systems represent one of the most mature technologies for large-scale energy storage. However, their advantages have not been proven in practice for cases of medium and small-sized isolated insular systems. Regarding Greece, which contains a large number of isolated insular systems, a PHS system in the island of Ikaria started its test operation in 2019, whereas in Europe only one PHS system operates in El Hierro (Canary Islands). This paper studies the effect of installing a wind-PHS hybrid power station in the operation of the insular power system of Samos, Greece, according to the latest regulatory framework. The implemented analysis uses real hourly data for a whole year, and examines the effects of such an installation considering investors’ and power system operators’ viewpoints. More specifically, the economic viability of this project under different billing scenarios is compared, and its impact on the insular power system operation for various PHS sizes is examined.


SIMULATION ◽  
1969 ◽  
Vol 13 (3) ◽  
pp. 155-164 ◽  
Author(s):  
Billy H. Easter

To harness the energy contained in such unconventional sources as winds, tides, and sunlight, a power system must incorporate an energy storage device to act as a buffer between the source and the load. Since the size of the energy storage device depends upon the relative timing of the availability of energy and the load demand, a system simulation is a logical approach to the study and design of power systems using these unconventional en ergy sources. GPSS is presented as an excellent simula tion vehicle. The physical properties to be simulated are discussed and the resulting GPSS programs are presented. Some proposed applications for these power systems are presented.


Energies ◽  
2019 ◽  
Vol 12 (14) ◽  
pp. 2819 ◽  
Author(s):  
Weilin Yang ◽  
Dong Yu ◽  
Dezhi Xu ◽  
Yiwei Zhang

An observer-based sliding mode fault-tolerant controller is developed in this paper, which is applied to an interconnected power system with a hybrid energy storage system (HESS). The model of the interconnected power system with HESS is introduced first. An observer is then proposed to estimate the unknown but bounded load disturbances and the actuator fault. The sliding mode fault-tolerant controller is further designed based on the observer ensuring that the area control error of the interconnected power system asymptotically converges to zero. The stability and the convergence of the whole system are proven based on the Lyapunov stability theory. Finally, the effectiveness of the proposed fault-control scheme is demonstrated through simulations.


Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5786
Author(s):  
Stefanos Ntomalis ◽  
Petros Iliadis ◽  
Konstantinos Atsonios ◽  
Athanasios Nesiadis ◽  
Nikos Nikolopoulos ◽  
...  

The defossilization of power generation is a prerequisite goal in order to reduce greenhouse gas emissions and transit for a sustainable economy. Achieving this goal requires increasing the penetration of renewable energy sources (RESs) such as solar and wind power. The gradual shrinking of conventional generation units in an energy map introduces new challenges to the stability of power systems as there is a considerable reduction of stored rotational energy in the synchronous generators (SGs) and the capability to control their power output, which has been taken for granted until today. Inertia and primary reserve reduction have a substantial effect on the ability of the power system to maintain its security and self-resilience during contingency events. Such issues become more evident in the case of non-interconnected islands (NII) as they have unique features associated with their small size and low inertia. The present study examines in depth the NII system of Madeira, which is composed of thermal, hydro, solid-waste, wind and solar generation units, and additional RES integration is planned for the near future. Electromagnetic transient (EMT) simulations are performed for both the current and future states of the system, including the installation of planned variable RES capacities. To alleviate the stability issues that occurred in the high-RES scenario, the introduction of a utility-scale battery energy storage system (BESS), capable of mitigating the active power imbalance due to the power system’s disturbances resultant of RES penetration, is examined. In addition, a comparison between a flywheel energy storage system (FESS) and BESS is shortly investigated. The grid has been modeled and simulated utilizing the open-source, object-oriented modeling language Modelica. The dynamic simulation results proved that battery storage is a promising technology that can be a solution for transitioning to a sustainable power system, maintaining its self-resilience under severe disturbances such as rapid load changes, the tripping of generation units and short-circuits.


Author(s):  
Güngör BAL ◽  
Süleyman Emre EYİMAYA

Due to uncontrolled natural variables such as wind speed, the correlation between the renewable energy production and the demand is strenuous. In order to make the renewable enrgy system effective the energy storage systems are utilized employing the, control systems for the enegy in the battery and power. In addition, the rapidly changing wind speed, particularly in wind turbines, causes variations in the power obtained from wind causing instability at a higher power levels. The system engaged in storing energy is employed to reduce fluctuations in power and to maintain stability of power systems. In this study, a wind turbine system integrated with energy storage system was created. This system is modeled and tested in MATLAB / Simulink. The results obtained evinces that the proposed system reduces power fluctuations and succeeds in meeting load demand.


Author(s):  
Ha-Na Song ◽  
Se-Hwan Jang ◽  
Hyeong-Jung Kim ◽  
Jae-Hyung Roh ◽  
Jong-Bae Park

2020 ◽  
Author(s):  
Gilles Mpembele ◽  
Jonathan Kimball

<div>The analysis of power system dynamics is usually conducted using traditional models based on the standard nonlinear differential algebraic equations (DAEs). In general, solutions to these equations can be obtained using numerical methods such as the Monte Carlo simulations. The use of methods based on the Stochastic Hybrid System (SHS) framework for power systems subject to stochastic behavior is relatively new. These methods have been successfully applied to power systems subjected to</div><div>stochastic inputs. This study discusses a class of SHSs referred to as Markov Jump Linear Systems (MJLSs), in which the entire dynamic system is jumping between distinct operating points, with different local small-signal dynamics. The numerical application is based on the analysis of the IEEE 37-bus power system switching between grid-tied and standalone operating modes. The Ordinary Differential Equations (ODEs) representing the evolution of the conditional moments are derived and a matrix representation of the system is developed. Results are compared to the averaged Monte Carlo simulation. The MJLS approach was found to have a key advantage of being far less computational expensive.</div>


Electronics ◽  
2021 ◽  
Vol 10 (13) ◽  
pp. 1598
Author(s):  
Dongmin Kim ◽  
Kipo Yoon ◽  
Soo Hyoung Lee ◽  
Jung-Wook Park

The energy storage system (ESS) is developing into a very important element for the stable operation of power systems. An ESS is characterized by rapid control, free charging, and discharging. Because of these characteristics, it can efficiently respond to sudden events that affect the power system and can help to resolve congested lines caused by the excessive output of distributed generators (DGs) using renewable energy sources (RESs). In order to efficiently and economically install new ESSs in the power system, the following two factors must be considered: the optimal installation placements and the optimal sizes of ESSs. Many studies have explored the optimal installation placement and the sizing of ESSs by using analytical approaches, mathematical optimization techniques, and artificial intelligence. This paper presents an algorithm to determine the optimal installation placement and sizing of ESSs for a virtual multi-slack (VMS) operation based on a power sensitivity analysis in a stand-alone microgrid. Through the proposed algorithm, the optimal installation placement can be determined by a simple calculation based on a power sensitivity matrix, and the optimal sizing of the ESS for the determined placement can be obtained at the same time. The algorithm is verified through several case studies in a stand-alone microgrid based on practical power system data. The results of the proposed algorithm show that installing ESSs in the optimal placement could improve the voltage stability of the microgrid. The sizing of the newly installed ESS was also properly determined.


Energies ◽  
2021 ◽  
Vol 14 (3) ◽  
pp. 522
Author(s):  
Rajitha Udawalpola ◽  
Taisuke Masuta ◽  
Taisei Yoshioka ◽  
Kohei Takahashi ◽  
Hideaki Ohtake

Power imbalances such as power shortfalls and photovoltaic (PV) curtailments have become a major problem in conventional power systems due to the introduction of renewable energy sources. There can be large power shortfalls and PV curtailments because of PV forecasting errors. These imbalances might increase when installed PV capacity increases. This study proposes a new scheduling method to reduce power shortfalls and PV curtailments in a PV integrated large power system with a battery energy storage system (BESS). The model of the Kanto area, which is about 30% of Japan’s power usage with 60 GW grid capacity, is used in simulations. The effect of large PV power integration of 50 GW and 100 GW together with large BESS capacity of 100 GWh and 200 GWh has been studied. Mixed integer linear programming technique is used to calculate generator unit commitment and BESS charging and discharging schedules. The simulation results are shown for two months with high and low solar irradiance, which include days with large PV over forecast and under forecast errors. The results reveal that the proposed method eliminates power shortfalls by 100% with the BESS and reduce the PV curtailments by 69.5% and 95.2% for the months with high and low solar irradiance, respectively, when 200 GWh BESS and 100 GW PV power generation are installed.


Sign in / Sign up

Export Citation Format

Share Document