scholarly journals Computationally Efficient Method of Co-Energy Calculation for Transverse Flux Machine Based on Poisson Equation in 2D

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4340
Author(s):  
Andrzej Smoleń ◽  
Lesław Gołębiowski ◽  
Marek Gołębiowski ◽  
Damian Mazur
Keyword(s):  
Poisson Equation ◽  
Cross Section ◽  
Rotation Angle ◽  
3D Models ◽  
Original Method ◽  
Energy Calculation ◽  
The Finite Element Method ◽  
Computationally Efficient ◽  
Main Requirement

The article presents an original method for numerical determination of the value of magnetic co-energy of a transverse construction motor. The aim of the developed method is initial determination of the co-energy value for the analyzed structure in the function of rotor rotation angle. The main requirement set to the presented method was the lowest possible complexity of the process computation, lack of the necessity to apply costly dedicated software, as well as creating construction 3D models. These requirements were met by applying specific cross-section/development of the analyzed machine geometry, as well as application of specific boundary conditions, which enabled reduction of the analyzed problem to solving a Poisson equation in 2D. The calculations were done with the Finite Element Method.

Fatigue damage in bending of reinforced concrete frames using non-destructive tests for dynamic strength of the cylinder

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Dragan D. Milašinović ◽  
Aleksandar Landović ◽  
Danica Goleš
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Fatigue Damage ◽  
Cross Section ◽  
Modal Parameters ◽  
The Finite Element Method ◽  
Concrete Frames ◽  
Content Type ◽  
Non Destructive

PurposeThe purpose of this paper is to contribute to the solution of the fatigue damage problem of reinforced concrete frames in bending.Design/methodology/approachThe problem of fatigue damage is formulated based on the rheological–dynamical analogy, including a scalar damage variable to address the reduction of stiffness in strain softening. The modal analysis is used by the finite element method for the determination of modal parameters and resonance stability of the selected frame cross-section. The objectivity of the presented method is verified by numerical examples, predicting the ductility in bending of the frame whose basic mechanical properties were obtained by non-destructive testing systems.FindingsThe modal analysis in the frame of the finite element method is suitable for the determination of modal parameters and resonance stability of the selected frame cross-section. It is recommended that the modulus of elasticity be determined by non-destructive methods, e.g. from the acoustic response.Originality/valueThe paper presents a novel method of solving the ductility in bending taking into account both the creep coefficient and the aging coefficient. The rheological-dynamical analogy (RDA) method uses the resonant method to find material properties. The characterization of the structural damping via the damping ratio is original and effective.

scholarly journals Parametrication of numerical simulation of drying process in atypicall condenzation lumber kiln

2004 ◽  
Vol 52 (1) ◽  
pp. 169-174
Author(s):  
Jiří Zejda ◽  
Petr Koňas
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Cross Section ◽  
3D Models ◽  
Computing System ◽  
Moisture Distribution ◽  
The Finite Element Method ◽  
Drying Process ◽  
Flow Temperature ◽  
2D And 3D

This work deal with modelling of the process of drying, air flow, temperature and moisture distribution in a condensation lumber kiln. This model was made and solved in the computing system ANSYS with the use of the finite element method. There are comparationes of the 2D and 3D models, shape of wood stacks and variability of their parameters (height, width, length, cross section) in the work. The flow velocity and orientation, pressure and temperature field were observed.

A quantitative approach to inner shell losses

1978 ◽  
Vol 36 (1) ◽  
pp. 526-527 ◽  
Author(s):  
R.D. Leapman ◽  
P. Rez ◽  
D.F. Mayers
Keyword(s):  
Energy Transfer ◽  
Cross Section ◽  
Cross Sections ◽  
Accurate Determination ◽  
Background Intensity ◽  
Core Excitation ◽  
Quantitative Basis ◽  
Cross Section Differential ◽  
Bound Electrons

Microanalysis by EELS has been developing rapidly and though the general form of the spectrum is now understood there is a need to put the technique on a more quantitative basis (1,2). Certain aspects important for microanalysis include: (i) accurate determination of the partial cross sections, σx(α,ΔE) for core excitation when scattering lies inside collection angle a and energy range ΔE above the edge, (ii) behavior of the background intensity due to excitation of less strongly bound electrons, necessary for extrapolation beneath the signal of interest, (iii) departures from the simple hydrogenic K-edge seen in L and M losses, effecting σx and complicating microanalysis. Such problems might be approached empirically but here we describe how computation can elucidate the spectrum shape.The inelastic cross section differential with respect to energy transfer E and momentum transfer q for electrons of energy E0 and velocity v can be written as

Profil Penyakit Malaria Di Rumah Sakit Islam Siti Rahmah Padang Tahun 2018

2020 ◽  
Vol 2 (2) ◽  
pp. 08-15
Author(s):  
Rahma Triyana ◽  
Salmi Salmi
Keyword(s):  
Observational Study ◽  
Frequency Distribution ◽  
Cross Section ◽  
Laboratory Tests ◽  
Age Group ◽  
Normal Range ◽  
Cross Sectional ◽  
West Sumatra ◽  
Severity Of The Disease

Malaria is one of the health problems in Indonesia, especially West Sumatra. Determination of the description of Malaria disease in an area is needed to determine the spread and severity of the disease. This study aims to determine the frequency distribution according to age, sex and place of residence, description of the types of Plasmodium causes of Malaria and hematological features in Malaria patients at Siti Rahmah Padang Hospital in 2018. This type of research is a descriptive observational study with an approach or design cross section (cross sectional). The frequency distribution of Malaria sufferers in Siti Rahmah Padang Hospital in 2018 according to the highest age was in the age group 21-30 years as many as 28 cases (36.8%), the highest sex among men was 46 (60.5%) and the highest number of residences was found in Koto Tangah sub-district there were 31 cases (40.8%). The type of Plasmodium found in Malaria cases in Siti Rahmah Padang Hospital in 2018 was P. vivax (73 cases (96.05%)) and P. falciparum (3 cases (3.95%)). The results of laboratory tests on Hb, hematocrit, platelet and leukocyte levels in Malaria positive patients in Siti Rahmah Padang Hospital in 2018 were in the normal range.

Profil Penyakit Malaria di Rumah Sakit Islam Siti Rahmah Padang Tahun 2018

2020 ◽  
Vol 2 (2) ◽  
pp. 08-15
Author(s):  
Rahma Triyana Y ◽  
Salmi Salmi
Keyword(s):  
Observational Study ◽  
Frequency Distribution ◽  
Cross Section ◽  
Laboratory Tests ◽  
Age Group ◽  
Normal Range ◽  
Cross Sectional ◽  
West Sumatra ◽  
Severity Of The Disease

Malaria is one of the health problems in Indonesia, especially West Sumatra. Determination of the description of Malaria disease in an area is needed to determine the spread and severity of the disease. This study aims to determine the frequency distribution according to age, sex and place of residence, description of the types of Plasmodium causes of Malaria and hematological features in Malaria patients at Siti Rahmah Padang Hospital in 2018. This type of research is a descriptive observational study with an approach or design cross section (cross sectional). The frequency distribution of Malaria sufferers in Siti Rahmah Padang Hospital in 2018 according to the highest age was in the age group 21-30 years as many as 28 cases (36.8%), the highest sex among men was 46 (60.5%) and the highest number of residences was found in Koto Tangah sub-district there were 31 cases (40.8%). The type of Plasmodium found in Malaria cases in Siti Rahmah Padang Hospital in 2018 was P. vivax (73 cases (96.05%)) and P. falciparum (3 cases (3.95%)). The results of laboratory tests on Hb, hematocrit, platelet and leukocyte levels in Malaria positive patients in Siti Rahmah Padang Hospital in 2018 were in the normal range.

scholarly journals New Method for Analysis of the Temporomandibular Joint Using Cone Beam Computed Tomography

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 3070
Author(s):  
Sebastian Iwaszenko ◽  
Jakub Munk ◽  
Stefan Baron ◽  
Adam Smoliński
Keyword(s):  
Computed Tomography ◽  
Temporomandibular Joint ◽  
Cross Section ◽  
Cone Beam Computed Tomography ◽  
Cone Beam ◽  
Section Plane ◽  
New Approach ◽  
Volume Of Interest ◽  
Gap Width

Modern dentistry commonly uses a variety of imaging methods to support diagnosis and treatment. Among them, cone beam computed tomography (CBCT) is particularly useful in presenting head structures, such as the temporomandibular joint (TMJ). The determination of the morphology of the joint is an important part of the diagnosis as well as the monitoring of the treatment results. It can be accomplished by measurement of the TMJ gap width at three selected places, taken at a specific cross-section. This study presents a new approach to these measurements. First, the CBCT images are denoised using curvilinear methods, and the volume of interest is determined. Then, the orientation of the vertical cross-section plane is computed based on segmented axial sections of the TMJ head. Finally, the cross-section plane is used to determine the standardized locations, at which the width of the gap between condyle and fossa is measured. The elaborated method was tested on selected TMJ CBCT scans with satisfactory results. The proposed solution lays the basis for the development of an autonomous method of TMJ index identification.

scholarly journals Determination of Transverse Shear Stiffness of Sandwich Panels with a Corrugated Core by Numerical Homogenization

Materials ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 1976
Author(s):  
Tomasz Garbowski ◽  
Tomasz Gajewski
Keyword(s):  
Transverse Shear ◽  
Shear Stiffness ◽  
The Finite Element Method ◽  
Homogenization Procedure ◽  
Plate Structures ◽  
Corrugated Board ◽  
Energy Equivalence ◽  
The Stability ◽  
Global Stiffness Matrix

Knowing the material properties of individual layers of the corrugated plate structures and the geometry of its cross-section, the effective material parameters of the equivalent plate can be calculated. This can be problematic, especially if the transverse shear stiffness is also necessary for the correct description of the equivalent plate performance. In this work, the method proposed by Biancolini is extended to include the possibility of determining, apart from the tensile and flexural stiffnesses, also the transverse shear stiffness of the homogenized corrugated board. The method is based on the strain energy equivalence between the full numerical 3D model of the corrugated board and its Reissner-Mindlin flat plate representation. Shell finite elements were used in this study to accurately reflect the geometry of the corrugated board. In the method presented here, the finite element method is only used to compose the initial global stiffness matrix, which is then condensed and directly used in the homogenization procedure. The stability of the proposed method was tested for different variants of the selected representative volume elements. The obtained results are consistent with other technique already presented in the literature.

Sign in / Sign up

Export Citation Format

Share Document