scholarly journals Brownian Motion and Thermophoretic Diffusion Effects on Micropolar Type Nanofluid Flow with Soret and Dufour Impacts over an Inclined Sheet: Keller-Box Simulations

Energies ◽  
2019 ◽  
Vol 12 (21) ◽  
pp. 4191 ◽  
Author(s):  
Khuram Rafique ◽  
Muhammad Imran Anwar ◽  
Masnita Misiran ◽  
Ilyas Khan ◽  
Asiful H. Seikh ◽  
...  
Keyword(s):  
Brownian Motion ◽  
Differential Equations ◽  
Soret Effect ◽  
Nanofluid Flow ◽  
Soret And Dufour Effects ◽  
Similarity Transformations ◽  
Stretching Factor ◽  
Micropolar Nanofluid ◽  
Nonlinear Stretching ◽  
Physical Quantities

The principal objective of the current study is to analyze the Brownian motion and thermophoretic impacts on micropolar nanofluid flow over a nonlinear inclined stretching sheet taking into account the Soret and Dufour effects. The compatible similarity transformations are applied to obtain the nonlinear ordinary differential equations from the partial differential equations. The numerical solution of the present study obtained via the Keller-Box technique. The physical quantities of interest are skin friction, Sherwood number, and heat exchange, along with several influences of material parameters on the momentum, temperature, and concentration are elucidated and clarified with diagrams. A decent settlement can be established in the current results with previously published work in the deficiency of incorporating effects. It is found that the growth of the inclination and nonlinear stretching factor decreases the velocity profile. Moreover, the growth of the Soret effect reduces the heat flux rate and wall shear stress.

scholarly journals Keller-Box Simulation for the Buongiorno Mathematical Model of Micropolar Nanofluid Flow over a Nonlinear Inclined Surface

Processes ◽  
2019 ◽  
Vol 7 (12) ◽  
pp. 926 ◽  
Author(s):  
Khuram Rafique ◽  
Muhammad Imran Anwar ◽  
Masnita Misiran ◽  
Ilyas Khan ◽  
Asiful H. Seikh ◽  
...  
Keyword(s):  
Brownian Motion ◽  
Differential Equations ◽  
Similarity Transformations ◽  
Flow Parameters ◽  
Box Scheme ◽  
Micropolar Nanofluid ◽  
Brownian Motion And Thermophoresis ◽  
Buongiorno Model ◽  
Inclined Surface ◽  
Physical Quantities

Brownian motion and thermophoresis diffusions are the fundamental ideas of abnormal upgrading in thermal conductivity via binary fluids (base fluid along with nanoparticles). The influence of Brownian motion and thermophoresis are focused on in the Buongiorno model. In this problem, we considered the Buongiorno model with Brownian motion and thermophoretic effects. The nonlinear ordinary differential equations are recovered from the partial differential equations of the boundary flow via compatible similarity transformations and then employed to the Keller-box scheme for numerical results. The physical quantities of our concern including skin friction, Nusselt number, and Sherwood number along with velocity, temperature and concentration profile against involved effects are demonstrated. The impacts of the involved flow parameters are drawn in graphs and tabulated forms. The inclination effect shows an inverse relation with the velocity field. Moreover, the velocity profile increases with the growth of the buoyancy effect.

scholarly journals Boundary layer flow of magneto-micropolar nanofluid flow with Hall and ion-slip effects using variable thermal diffusivity

2017 ◽  
Vol 65 (3) ◽  
pp. 383-390 ◽  
Author(s):  
M. Bilal ◽  
S. Hussain ◽  
M. Sagheer
Keyword(s):  
Thermal Diffusivity ◽  
Differential Equations ◽  
Skin Friction Coefficient ◽  
Nanofluid Flow ◽  
Similarity Transformations ◽  
Slip Effects ◽  
Micropolar Nanofluid ◽  
Ion Slip ◽  
Layer Flow ◽  
Linear Differential

AbstractIn the present article, magneto-micropolar nanofluid flow with suction or injection in a porous medium over a stretching sheet for the heat and mass transfer is analyzed numerically. Both Hall and ion-slip effects are considered along with variable thermal diffusivity. The governing partial differential equations are transformed to ordinary differential equations using usual similarity transformations. These coupled non-linear differential equations are solved using the shooting method. Effects of prominent parameter on velocities, temperature and concentration are discussed graphically. Numerical values of skin-friction coefficient, local Nusselt number and local Sherwood number are also tabulated and discussed.

scholarly journals Numerical Study on Micropolar Nanofluid Flow over an Inclined Surface by Means of Keller-Box

2019 ◽  
pp. 1-21 ◽  
Author(s):  
Khuram Rafique ◽  
Muhammad Imran Anwar ◽  
Masnita Misiran
Keyword(s):  
Differential Equations ◽  
Numerical Study ◽  
Nonlinear Partial Differential Equations ◽  
Nanofluid Flow ◽  
Heat And Mass Exchange ◽  
Buongiorno’S Model ◽  
Similarity Transformations ◽  
Keller Box Method ◽  
Micropolar Nanofluid ◽  
Layer Flow

In this paper, micropolar nanofluid boundary layer flow over a linear inclined stretching surface with the magnetic effect is investigated. Buongiorno’s model utilized in this study for the thermal efficiencies of the fluid flow in the presence of Brownian motion and thermophoresis properties. The nonlinear problem for micropolar nanofluid flow over an inclined sheet is established to study the heat and mass exchange phenomenon by considering portent flow parameters to strengthen the boundary layers. The governing nonlinear partial differential equations are changed to nonlinear ordinary differential equations by using suitable similarity transformations and then solved numerically by applying the Keller-Box method. A comparison of the setup results in the absence of the incorporated impacts is performed with the accessible results and perceived in a decent settlement. Numerical and graphical outcomes are additionally presented in tables and diagrams.

Multiple slip effects on MHD non-Newtonian nanofluid flow over a nonlinear permeable elongated sheet

2019 ◽  
Vol 15 (5) ◽  
pp. 913-931 ◽  
Author(s):  
Jawad Raza ◽  
Mushayydha Farooq ◽  
Fateh Mebarek-Oudina ◽  
B. Mahanthesh
Keyword(s):  
Boundary Layer ◽  
Brownian Motion ◽  
Differential Equations ◽  
Layer Thickness ◽  
Boundary Layer Thickness ◽  
Stretching Surface ◽  
Nanofluid Flow ◽  
Content Type ◽  
Slip Effects ◽  
Nonlinear Stretching

Purpose The purpose of this paper is to examine the interaction effects of a transverse magnetic field and slip effects of Casson fluid with suspended nanoparticles over a nonlinear stretching surface. Mathematical modeling for the law of conservation of mass, momentum, heat and concentration of nanoparticles is executed. Design/methodology/approach Governing nonlinear partial differential equations are reduced into nonlinear ordinary differential equations and then shooting method is employed for its solution. The slope of the linear regression line of the data points is calculated to measure the rate of increase/decrease in the reduced Nusselt number. Findings The effects of magnetic parameter (0=M=4), Casson parameter (0.1=β<8), nonlinear stretching parameter (0=n=3) and porosity parameter (0=P=6) on axial velocity are shown graphically. Numerical results were compared with another numerical approach and an excellent agreement was observed. This study reveals the fact that the Brownian motion parameter and boundary layer thickness have a direct relationship with temperature. Also, Brownian motion and thermophoresis contribute to an increase in the thermal boundary layer thickness. Originality/value Despite the immense significance and repeated employment of non-Newtonian fluids in industry and science, no attempt has been made up till now to inspect the Casson nanofluid flow with a permeable nonlinear stretching surface.

Thermally and chemically reacted MHD Maxwell nanofluid flow past an inclined permeable stretching surface

2021 ◽  
pp. 095440892110507
Author(s):  
Amar B. Patil ◽  
Vishwambhar S. Patil ◽  
Pooja P. Humane ◽  
Nalini S. Patil ◽  
Govind R. Rajput
Keyword(s):  
Differential Equations ◽  
Energy Transport ◽  
Stretching Surface ◽  
Nanofluid Flow ◽  
Linear Ordinary Differential Equations ◽  
Maxwell Nanofluid ◽  
Similarity Transformations ◽  
Flow Past ◽  
Chemically Reacting ◽  
The Impact

The present work deals with chemically reacting unsteady magnetohydrodynamic Maxwell nanofluid flow past an inclined permeable stretching surface embedded in a porous medium with thermal radiation. The formulated governing partial differential equations conveying the flow model of Maxwell with Buongiorno modeled nanofluid is transformed into the system of highly non-linear ordinary differential equations via suitable similarity transformations; those equations are transmuted into an initial value problem and then solved numerically by a shooting approach with Runge–-Kutta fourth-order schema. To obtain the physical insight of the flow situation, the influence of associated parameters on the velocity, temperature, and concentration profiles is sketched graphically with the aid of MATLAB software. Furthermore, engineering quantities of interest are interpreted graphically. The computed numerical results are compared to estimate the validity of the achieved results; it has been found out that the computed results are highly accurate. The impact of the Maxwell parameter and inclination angle of the sheet on the velocity field is observed in decaying. Both thermal and solutal energy transport are progressive in nature as the Maxwell parameter and thermophoresis parameter grows, and a reverse trend is observed for Prandtl number.

scholarly journals Numerical Analysis with Keller-Box Scheme for Stagnation Point Effect on Flow of Micropolar Nanofluid over an Inclined Surface

Symmetry ◽  
2019 ◽  
Vol 11 (11) ◽  
pp. 1379 ◽  
Author(s):  
Rafique ◽  
Anwar ◽  
Misiran ◽  
Khan ◽  
Seikh ◽  
...  
Keyword(s):  
Differential Equations ◽  
Skin Friction ◽  
Stagnation Point ◽  
Nonlinear Differential Equations ◽  
Stagnation Region ◽  
Similarity Transformations ◽  
Box Scheme ◽  
Mass Fluxes ◽  
Micropolar Nanofluid ◽  
Inclined Surface

The prime aim of this paper is to probe the flow of micropolar nanofluid towards an inclined stretching surface adjacent to the stagnation region with Brownian motion and thermophoretic impacts. The chemical reaction and heat generation or absorption are also taken into account. The energy and mass transport of the micropolar nanofluid flow towards an inclined surface are discussed. The numerical solution is elucidated for the converted non-linear ordinary differential equation from the set of partial nonlinear differential equations via compatible similarity transformations. A converted system of ordinary differential equations is solved via the Keller-box scheme. The stretching velocity and external velocity are supposed to change linearly by the distance from the stagnation point. The impacts of involved parameters on the concerned physical quantities such as skin friction, Sherwood number, and energy exchange are discussed. These results are drawn through the graphs and presented in the tables. The energy and mass exchange rates show a direct relation with the stagnation point. In the same vein, skin friction diminishes with the growth of the stagnation factor. Heat and mass fluxes show an inverse correspondence with the inclination factor.

scholarly journals Soret and dufour effects on free convection flow of a couple stress fluid in a vertical channel with chemical reaction

2013 ◽  
Vol 19 (1) ◽  
pp. 45-55 ◽  
Author(s):  
D. Srinivasacharya ◽  
K. Kaladhar
Keyword(s):  
Differential Equations ◽  
Chemical Reaction ◽  
Couple Stress ◽  
Vertical Channel ◽  
Couple Stress Fluid ◽  
Convection Flow ◽  
Parallel Plates ◽  
Soret And Dufour Effects ◽  
Similarity Transformations ◽  
Dufour Number

The Soret and Dufour effects in the presence of chemical reaction on natural convection heat and mass transfer of a couple stress fluid in a vertical channel formed by two vertical parallel plates is presented. The governing non-linear partial differential equations are transformed into a system of ordinary differential equations using similarity transformations. The resulting equations are then solved using Homotopy Analysis Method (HAM). Profiles of dimensionless velocity, temperature and concentration are shown graphically for various values of Dufour number, Soret number, Couple stress parameter and chemical reaction parameter.

scholarly journals Axisymmetric Stagnation Flow of a Micropolar Nanofluid in a Moving Cylinder

2012 ◽  
Vol 2012 ◽  
pp. 1-18 ◽  
Author(s):  
S. Nadeem ◽  
Abdul Rehman ◽  
K. Vajravelu ◽  
Jinho Lee ◽  
Changhoon Lee
Keyword(s):  
Differential Equations ◽  
Nonlinear Differential Equations ◽  
Nonlinear Partial Differential Equations ◽  
Stagnation Flow ◽  
Finite Radius ◽  
Similarity Transformations ◽  
Moving Cylinder ◽  
Micropolar Nanofluid ◽  
Homotopy Analysis ◽  
Flow Phenomena

An analysis is carried out for axisymmetric stagnation flow of a micropolar nanofluid in a moving cylinder with finite radius. The coupled nonlinear partial differential equations of the problem are simplified with the help of similarity transformations and the resulting coupled nonlinear differential equations are solved analytically by homotopy analysis method (HAM). The features of the flow phenomena, inertia, heat transfer, and nanoparticles are analyzed and discussed.

scholarly journals A Numerical Approach for an Unsteady Tangent Hyperbolic Nanofluid Flow past a Wedge in the Presence of Suction/Injection

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
U. Shahzad ◽  
M. Mushtaq ◽  
S. Farid ◽  
K. Jabeen ◽  
R.M.A. Muntazir
Keyword(s):  
Differential Equations ◽  
Graphical Representation ◽  
Numerical Technique ◽  
Darcy Number ◽  
Numerical Approach ◽  
Nanofluid Flow ◽  
Similarity Transformations ◽  
Flow Past ◽  
Layer Flow ◽  
The Impact

The analysis of unsteady tangent hyperbolic nanofluid flow past a wedge with injection-suction, because of its beneficial uses, has gained a lot of attention. The present study is mainly concerned with tangent hyperbolic nanofluid (non-Newtonian nanofluid). First, we have converted the system of partial differential equations (PDEs) to a system of ordinary differential equations (ODEs) with the help of appropriate similarity transformations. Boundary conditions are also transformed by utilizing suitable similarity transformation. Now, for the obtained ODEs, we have used the numerical technique bvp 4 c and investigated the velocity, temperature, and concentration profiles. The accuracy of the flow model is validated by applying MAPLE d-solve command having good agreement while comparing the numerical results obtained by bvp4c for both suction and injection cases. The effects of distinct dimensionless parameters on the various profiles are being analyzed. The novel features such as thermophoresis and Brownian motion are also discussed to investigate the characteristics of heat and mass transfer. Graphical representation of the impact of varying parameters and the solution method for the abovementioned model is thoroughly discussed. It was observed that suction or injection can play a key role in controlling boundary layer flow and brings stability in the flow. It was also noticed that by increasing the Darcy number, velocity profile increases in both injection-suction cases.

Soret and dufour effects on MHD mixed convection heat and mass transfer in a micropolar fluid

2013 ◽  
Vol 3 (4) ◽  
Author(s):  
Darbhasayanam Srinivasacharya ◽  
Mendu Upendar
Keyword(s):  
Mass Transfer ◽  
Differential Equations ◽  
Mixed Convection ◽  
Heat And Mass Transfer ◽  
Micropolar Fluid ◽  
Nonlinear Partial Differential Equations ◽  
Skin Friction Coefficient ◽  
Soret And Dufour Effects ◽  
Similarity Transformations ◽  
Special Cases

AbstractThis paper analyzes the flow, heat and mass transfer characteristics of the mixed convection on a vertical plate in a micropolar fluid in the presence of Soret and Dufour effects. A uniform magnetic field of magnitude is applied normal to the plate. The governing nonlinear partial differential equations are transformed into a system of coupled nonlinear ordinary differential equations using similarity transformations and then solved numerically using the Keller-box method. The numerical results are compared and found to be in good agreement with previously published results as special cases of the present investigation. The rate of heat and mass transfer at the plate are presented graphically for various values of coupling number, magnetic parameter, Prandtl number, Schmidt number, Dufour and Soret numbers. In addition, the skin-friction coefficient, the wall couple stress are shown in a tabular form.

Sign in / Sign up

Export Citation Format

Share Document