scholarly journals Optimal Conductor Size Selection in Distribution Networks with High Penetration of Distributed Generation Using Adaptive Genetic Algorithm

Energies ◽  
2019 ◽  
Vol 12 (11) ◽  
pp. 2065 ◽  
Author(s):  
Zhenghui Zhao ◽  
Joseph Mutale
Keyword(s):  
Genetic Algorithm ◽  
Distributed Generation ◽  
Distribution Systems ◽  
Distribution Network ◽  
Distribution Networks ◽  
Adaptive Genetic Algorithm ◽  
Optimization Approach ◽  
Optimization Strategy ◽  
Size Selection ◽  
High Penetration

The widespread deployment of distributed generation (DG) has significantly impacted the planning and operation of current distribution networks. The environmental benefits and the reduced installation cost have been the primary drivers for the investment in large-scale wind farms and photovoltaics (PVs). However, the distribution network operators (DNOs) face the challenge of conductor upgrade and selection problems due to the increasing capacity of DG. In this paper, a hybrid optimization approach is introduced to solve the optimal conductor size selection (CSS) problem in the distribution network with high penetration of DGs. An adaptive genetic algorithm (AGA) is employed as the primary optimization strategy to find the optimal conductor sizes for distribution networks. The aim of the proposed approach is to minimize the sum of life-cycle cost (LCC) of the selected conductor and the total energy procurement cost during the expected operation periods. Alternating current optimal power flow (AC-OPF) analysis is applied as the secondary optimization strategy to capture the economic dispatch (ED) and return the results to the primary optimization process when a certain conductor arrangement is assigned by AGA. The effectiveness of the proposed algorithm for optimal CSS is validated through simulations on modified IEEE 33-bus and IEEE 69-bus distribution systems.

scholarly journals A Novel Machine Learning-Based Short-Circuit Current Prediction Method for Active Distribution Networks

Energies ◽  
2019 ◽  
Vol 12 (19) ◽  
pp. 3793 ◽  
Author(s):  
Zheng ◽  
Wang ◽  
Jiang ◽  
He
Keyword(s):  
Distribution Systems ◽  
Large Scale ◽  
Short Circuit ◽  
Distribution Network ◽  
Prediction Method ◽  
Short Circuit Current ◽  
Distribution Networks ◽  
Test System ◽  
High Penetration ◽  
Active Distribution Networks

The traditional mechanism models used in short-circuit current calculations have shortcomings in terms of accuracy and speed for distribution systems with inverter-interfaced distributed generators (IIDGs). Faced with this issue, this paper proposes a novel data-driven short-circuit current prediction method for active distribution systems. This method can be used to accurately predict the short-circuit current flowing through a specified measurement point when a fault occurs at any position in the distribution network. By analyzing the features related to the short-circuit current in active distribution networks, feature combination is introduced to reflect the short-circuit current. Specifically, the short-circuit current where IIDGs are not connected into the system is treated as the key feature. The accuracy and efficiency of the proposed method are verified using the IEEE 34-node test system. The requirement of the sample sizes for distribution systems of different scale is further analyzed by using the additional IEEE 13-node and 69-node test systems. The applicability of the proposed method in large-scale distribution network with high penetration of IIDGs is verified as well.

scholarly journals Reactive Power Optimization for Distribution Network Based on Distributed Random Gradient-Free Algorithm

Energies ◽  
2018 ◽  
Vol 11 (3) ◽  
pp. 534 ◽  
Author(s):  
Jun Xie ◽  
Chunxiang Liang ◽  
Yichen Xiao
Keyword(s):  
Distribution Systems ◽  
Reactive Power ◽  
Power Optimization ◽  
Distribution Network ◽  
Continuous Optimization ◽  
Distribution Networks ◽  
Optimal Operation ◽  
Centralized Control ◽  
Optimization Strategy ◽  
Reactive Power Optimization

The increasing penetration of distributed energy resources in distribution systems has brought a number of network management and operational challenges; reactive power variation has been identified as one of the dominant effects. Enormous growth in a variety of controllable devices that have complex control requirements are integrated in distribution networks. The operation modes of traditional centralized control are difficult to tackle these problems with central controller. When considering the non-linear multi-objective functions with discrete and continuous optimization variables, the proposed random gradient-free algorithm is employed to the optimal operation of controllable devices for reactive power optimization. This paper presents a distributed reactive power optimization algorithm that can obtain the global optimum solution based on random gradient-free algorithm for distribution network without requiring a central coordinator. By utilizing local measurements and local communications among capacitor banks and distributed generators (DGs), the proposed reactive power control strategy can realize the overall network voltage optimization and power loss minimization simultaneously. Simulation studies on the modified IEEE-69 bus distribution systems demonstrate the effectiveness and superiority of the proposed reactive power optimization strategy.

scholarly journals Optimal Sizing and Placement of Capacitor Banks in Distribution Networks Using a Genetic Algorithm

Electricity ◽  
2021 ◽  
Vol 2 (2) ◽  
pp. 187-204
Author(s):  
Gian Giuseppe Soma
Keyword(s):  
Genetic Algorithm ◽  
Electricity Market ◽  
Distribution Systems ◽  
Reactive Power ◽  
Electricity Consumption ◽  
Distribution Networks ◽  
Optimal Placement ◽  
Capacitor Banks ◽  
Control Pattern ◽  
Definition Of

Nowadays, response to electricity consumption growth is mainly supported by efficiency; therefore, this is the new main goal in the development of electric distribution networks, which must fully comply with the system’s constraints. In recent decades, the issue of independent reactive power services, including the optimal placement of capacitors in the grid due to the restructuring of the electricity industry and the creation of a competitive electricity market, has received attention from related companies. In this context, a genetic algorithm is proposed for optimal planning of capacitor banks. A case study derived from a real network, considering the application of suitable daily profiles for loads and generators, to obtain a better representation of the electrical conditions, is discussed in the present paper. The results confirmed that some placement solutions can be obtained with a good compromise between costs and benefits; the adopted benefits are energy losses and power factor infringements, taking into account the network technical limits. The feasibility and effectiveness of the proposed algorithm for optimal placement and sizing of capacitor banks in distribution systems, with the definition of a suitable control pattern, have been proved.

Optimization of Real Power Loss and Voltage Stability Index for Distribution Systems with Distributed Generation

2017 ◽  
Vol 33 ◽  
pp. 100-114 ◽  
Author(s):  
Mostafa Elshahed ◽  
Mahmoud Dawod ◽  
Zeinab H. Osman
Keyword(s):  
Genetic Algorithm ◽  
Distributed Generation ◽  
Distribution Systems ◽  
Voltage Stability ◽  
Reactive Power ◽  
Optimization Problems ◽  
Stability Index ◽  
Mixed Integer ◽  
Voltage Profile ◽  
Voltage Stability Index

Integrating Distributed Generation (DG) units into distribution systems can have an impact on the voltage profile, power flow, power losses, and voltage stability. In this paper, a new methodology for DG location and sizing are developed to minimize system losses and maximize voltage stability index (VSI). A proper allocation of DG has to be determined using the fuzzy ranking method to verify best compromised solutions and achieve maximum benefits. Synchronous machines are utilized and its power factor is optimally determined via genetic optimization to inject reactive power to decrease system losses and improve voltage profile and VSI. The Augmented Lagrangian Genetic Algorithm with nonlinear mixed-integer variables and Non-dominated Sorting Genetic Algorithm have been implemented to solve both single/multi-objective function optimization problems. For proposed methodology effectiveness verification, it is tested on 33-bus and 69-bus radial distribution systems then compared with previous works.

A novel approach to increase the share of renewable purchase obligation for planning of distribution network including grid scale energy storage

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Jitendra Singh Bhadoriya ◽  
Atma Ram Gupta
Keyword(s):  
Energy Storage ◽  
Objective Function ◽  
Distributed Generation ◽  
Carbon Emissions ◽  
Distribution Network ◽  
Clean Energy ◽  
Distribution Networks ◽  
Optimization Techniques ◽  
Novel Approach ◽  
Demand Models

Abstract In recent times, producing electricity with lower carbon emissions has resulted in strong clean energy incorporation into the distribution network. The technical development of weather-driven renewable distributed generation units, the global approach to reducing pollution emissions, and the potential for independent power producers to engage in distribution network planning (DNP) based on the participation in the increasing share of renewable purchasing obligation (RPO) are some of the essential reasons for including renewable-based distributed generation (RBDG) as an expansion investment. The Grid-Scale Energy Storage System (GSESS) is proposed as a promising solution in the literature to boost the energy storage accompanied by RBDG and also to increase power generation. In this respect, the technological, economic, and environmental evaluation of the expansion of RBDG concerning the RPO is formulated in the objective function. Therefore, a novel approach to modeling the composite DNP problem in the regulated power system is proposed in this paper. The goal is to increase the allocation of PVDG, WTDG, and GSESS in DNP to improve the quicker retirement of the fossil fuel-based power plant to increase total profits for the distribution network operator (DNO), and improve the voltage deviation, reduce carbon emissions over a defined planning period. The increment in RPO and decrement in the power purchase agreement will help DNO to fulfill round-the-clock supply for all classes of consumers. A recently developed new metaheuristic transient search optimization (TSO) based on electrical storage elements’ stimulation behavior is implemented to find the optimal solution for multi-objective function. The balance between the exploration and exploitation capability makes the TSO suitable for the proposed power flow problem with PVDG, WTDG, and GSESS. For this research, the IEEE-33 and IEEE-69 low and medium bus distribution networks are considered under a defined load growth for planning duration with the distinct load demand models’ aggregation. The findings of the results after comparing with well-known optimization techniques DE and PSO confirm the feasibility of the method suggested.

scholarly journals Distributed Generation Placement in Radial Distribution Networks using a Bat-inspired Algorithm

DYNA ◽  
2015 ◽  
Vol 82 (192) ◽  
pp. 60-67 ◽  
Author(s):  
John Edwin Candelo-Becerra ◽  
Helman Hernández-Riaño
Keyword(s):  
Distributed Generation ◽  
Radial Distribution ◽  
Distribution Systems ◽  
Reactive Power ◽  
Distribution Networks ◽  
Power Losses ◽  
Number Of Generators ◽  
Metaheuristic Techniques ◽  
Distributed Generation Placement ◽  
Made In

<p>Distributed generation (DG) is an important issue for distribution networks due to the improvement in power losses, but the location and size of generators could be a difficult task for exact techniques. The metaheuristic techniques have become a better option to determine good solutions and in this paper the application of a bat-inspired algorithm (BA) to a problem of location and size of distributed generation in radial distribution systems is presented. A comparison between particle swarm optimization (PSO) and BA was made in the 33-node and 69-node test feeders, using as scenarios the change in active and reactive power, and the number of generators. PSO and BA found good results for small number and capacities of generators, but BA obtained better results for difficult problems and converged faster for all scenarios. The maximum active power injections to reduce power losses in the distribution networks were found for the five scenarios.</p>

scholarly journals Optimal placement of valves in a water distribution network with CLP(FD)

2011 ◽  
Vol 11 (4-5) ◽  
pp. 731-747 ◽  
Author(s):  
MASSIMILIANO CATTAFI ◽  
MARCO GAVANELLI ◽  
MADDALENA NONATO ◽  
STEFANO ALVISI ◽  
MARCO FRANCHINI
Keyword(s):  
Logic Programming ◽  
Distribution Systems ◽  
Water Distribution ◽  
Distribution Network ◽  
Real Life ◽  
Water Distribution Network ◽  
Distribution Networks ◽  
Constraint Logic Programming ◽  
Optimal Placement ◽  
Isolation System

AbstractThis paper presents a new application of logic programming to a real-life problem in hydraulic engineering. The work is developed as a collaboration of computer scientists and hydraulic engineers, and applies Constraint Logic Programming to solve a hard combinatorial problem. This application deals with one aspect of the design of a water distribution network, i.e., the valve isolation system design. We take the formulation of the problem by Giustolisi and Savić (2008 Optimal design of isolation valve system for water distribution networks. InProceedings of the 10th Annual Water Distribution Systems Analysis Conference WDSA2008, J. Van Zyl, A. Ilemobade, and H. Jacobs, Eds.) and show how, thanks to constraint propagation, we can get better solutions than the best solution known in the literature for the Apulian distribution network. We believe that the area of the so-calledhydroinformaticscan benefit from the techniques developed in Constraint Logic Programming and possibly from other areas of logic programming, such as Answer Set Programming.

scholarly journals Adaptive Day-Ahead Prediction of Resilient Power Distribution Network Partitions

2021 ◽  
Author(s):  
Chinmay Shah ◽  
Richard Wies
Keyword(s):  
Power Distribution ◽  
Renewable Energy Sources ◽  
Optimization Technique ◽  
Distribution Network ◽  
Distribution Networks ◽  
Optimization Techniques ◽  
Power Distribution Networks ◽  
Power Distribution Network ◽  
High Penetration ◽  
Islanded Mode

The conventional power distribution network is being transformed drastically due to high penetration of renewable energy sources (RES) and energy storage. The optimal scheduling and dispatch is important to better harness the energy from intermittent RES. Traditional centralized optimization techniques limit the size of the problem and hence distributed techniques are adopted. The distributed optimization technique partitions the power distribution network into sub-networks which solves the local sub problem and exchanges information with the neighboring sub-networks for the global update. This paper presents an adaptive spectral graph partitioning algorithm based on vertex migration while maintaining computational load balanced for synchronization, active power balance and sub-network resiliency. The parameters that define the resiliency metrics of power distribution networks are discussed and leveraged for better operation of sub-networks in grid connected mode as well as islanded mode. The adaptive partition of the IEEE 123-bus network into resilient sub-networks is demonstrated in this paper.

Sign in / Sign up

Export Citation Format

Share Document