scholarly journals Corrective Control by Line Switching for Relieving Voltage Violations Based on A Three-Stage Methodology

Energies ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1206 ◽  
Author(s):  
Zhengwei Shen ◽  
Yong Tang ◽  
Jun Yi ◽  
Changsheng Chen ◽  
Bing Zhao ◽  
...  
Keyword(s):  
Power Systems ◽  
Power System ◽  
Detailed Analysis ◽  
High Speed ◽  
Power Flow ◽  
Large Scale ◽  
Online Application ◽  
Multiple Line ◽  
Ac Power ◽  
Line Switching

An online line switching methodology to relieve voltage violations is proposed. This novel online methodology is based on a three-stage strategy, including screening, ranking, and detailed analysis and assessment stages for high speed (online application) and accuracy. The proposed online methodology performs the tasks of rapidly identifying effective candidate lines, ranking the effective candidates, performing detailed analysis of the top ranked candidates, and supplying a set of solutions for the power system. The post-switching power systems, after executing the proposed line switching action, meet the operational and engineering constraints. The results provided by the exact Alternating Current (AC) power flow are used as a benchmark to compare the speed and accuracy of the proposed three-stage methodology. One feature of the methodology is that it can provide a set of high-quality switching solutions from which operators may choose a preferred solution. The effectiveness of the proposed online line switching methodology in providing single-line switching and multiple-line switching solutions to relieve voltage violations is evaluated on the IEEE 39-bus and 2746-bus power system. The CPU time of the proposed methodology compared with that under AC power flow constitutes a speed-up of 9905.32% on a 2746-bus power system, showing good potential for online application in a large-scale power system.

scholarly journals Fast Heuristic AC Power Flow Analysis with Data-Driven Enhanced Linearized Model

Energies ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 3308
Author(s):  
Xingpeng Li
Keyword(s):  
Power Systems ◽  
Power System ◽  
Power Flow ◽  
Flow Model ◽  
Reactive Power ◽  
Unit Commitment ◽  
Flow Analysis ◽  
Data Driven ◽  
Dc Power ◽  
Ac Power

Though the full AC power flow model can accurately represent the physical power system, the use of this model is limited in practice due to the computational complexity associated with its non-linear and non-convexity characteristics. For instance, the AC power flow model is not incorporated in the unit commitment model for practical power systems. Instead, an alternative linearized DC power flow model is widely used in today’s power system operational and planning tools. However, DC power flow model will be useless when reactive power and voltage magnitude are of concern. Therefore, a linearized AC (LAC) power flow model is needed to address this issue. This paper first introduces a traditional LAC model and then proposes an enhanced data-driven linearized AC (DLAC) model using the regression analysis technique. Numerical simulations conducted on the Tennessee Valley Authority (TVA) system demonstrate the performance and effectiveness of the proposed DLAC model.

scholarly journals A Novel Methodology for Optimal SVC Location Considering N-1 Contingencies and Reactive Power Flows Reconfiguration

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6652
Author(s):  
Diego Carrión ◽  
Edwin García ◽  
Manuel Jaramillo ◽  
Jorge W. González
Keyword(s):  
Power Systems ◽  
Large Scale ◽  
Reactive Power ◽  
Voltage Profile ◽  
Expansion Planning ◽  
Transmission Expansion Planning ◽  
Transmission Expansion ◽  
Ac Power ◽  
The Stability ◽  
Line Switching

In this research, an alternative methodology is proposed for the location of Static VAR Compensators (SVC) in power systems, considering the reconfiguration of reactive power flows through the optimal switching of the transmission stage, which resembles the contingency restriction N-1 usually considered in transmission expansion planning. Based on this methodology, the contingency index was determined, which made it possible to determine which is the contingency that generates the greatest voltage degradation in the system. For the quantification of reactive flows, optimal AC power flows were used, which minimize the operating costs of the power system subject to transmission line switching restrictions, line charge-ability, voltages and node angles. To determine the node in which the compensation should be placed, the contingency index criterion was used, verifying the voltage profile in the nodes. The proposed methodology was tested in the IEEE test systems of 9, 14 nodes and large-scale systems of 200, 500 and 2000 bus-bars; to verify that the proposed methodology is adequate, the stability of the EPS was verified. Finally, the model allows satisfactorily to determine the node in which the SVC is implemented and its compensation value.

Integrated Power Flow Analysis with Large-scale Solar Photovoltaic Power Systems Employing N-R Method

2019 ◽  
Vol 20 (1) ◽  
Author(s):  
Girisha H Navada ◽  
K. N. Shubhanga
Keyword(s):  
Power Systems ◽  
Power System ◽  
Power Flow ◽  
Large Scale ◽  
Control Strategies ◽  
Linear Equations ◽  
Flow Analysis ◽  
Load Flow ◽  
Flow Equations ◽  
Single Machine Infinite Bus

Abstract A method is proposed to modify the conventional load flow programme to accommodate large-scale Solar PhotoVoltaics (SPV) power plant with series power specifications. The programme facilitates easy handling of any number of SPV systems with standard control strategies such as pf-control and voltage-control, considering solar inverter’s power constraints. In this method, the non-linear equations related to SPV systems, located at multiple locations, are solved with the main load flow equations in an integrated fashion, considerably reducing the implementation task. This task is achieved by augmenting the inverter buses to the existing power system network in such a way that the changes required in the conventional programme are minimal. To show the effectiveness of the proposed method, it is compared with the alternate-iteration method popularly followed in the literature. The workability of the proposed method has been demonstrated by using a Single Machine Infinite Bus (SMIB) system and the IEEE14-bus power system with SPV systems. Various test cases pertaining to meteorological variables and control strategies are also presented.

scholarly journals A Full-Newton AC-DC Power Flow Methodology for HVDC Multi-Terminal Systems and Generic DC Network Representation

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1658
Author(s):  
Leandro Almeida Vasconcelos ◽  
João Alberto Passos Filho ◽  
André Luis Marques Marcato ◽  
Giovani Santiago Junqueira
Keyword(s):  
Power Systems ◽  
Direct Current ◽  
Power Flow ◽  
Large Scale ◽  
Flow Problem ◽  
Control Strategies ◽  
Problem Formulation ◽  
Expansion Planning ◽  
Dc Power ◽  
Power Flow Problem

The use of Direct Current (DC) transmission links in power systems is increasing continuously. Thus, it is important to develop new techniques to model the inclusion of these devices in network analysis, in order to allow studies of the operation and expansion planning of large-scale electric power systems. In this context, the main objective of this paper is to present a new methodology for a simultaneous AC-DC power flow for a multi-terminal High Voltage Direct Current (HVDC) system with a generic representation of the DC network. The proposed methodology is based on a full Newton formulation for solving the AC-DC power flow problem. Equations representing the converters and steady-state control strategies are included in a power flow problem formulation, resulting in an expanded Jacobian matrix of the Newton method. Some results are presented based on HVDC test systems to confirm the effectiveness of the proposed approach.

scholarly journals A Novel Methodology for Adaptive Coordination of Multiple Controllers in Electrical Grids

Mathematics ◽  
2021 ◽  
Vol 9 (13) ◽  
pp. 1474
Author(s):  
Ruben Tapia-Olvera ◽  
Francisco Beltran-Carbajal ◽  
Antonio Valderrabano-Gonzalez ◽  
Omar Aguilar-Mejia
Keyword(s):  
Power Systems ◽  
Power System ◽  
Electric Power ◽  
Large Scale ◽  
Short Circuit ◽  
Dynamic Performance ◽  
Low Frequency ◽  
Electric Power System ◽  
Design Stage ◽  
Positive Interaction

This proposal is aimed to overcome the problem that arises when diverse regulation devices and controlling strategies are involved in electric power systems regulation design. When new devices are included in electric power system after the topology and regulation goals were defined, a new design stage is generally needed to obtain the desired outputs. Moreover, if the initial design is based on a linearized model around an equilibrium point, the new conditions might degrade the whole performance of the system. Our proposal demonstrates that the power system performance can be guaranteed with one design stage when an adequate adaptive scheme is updating some critic controllers’ gains. For large-scale power systems, this feature is illustrated with the use of time domain simulations, showing the dynamic behavior of the significant variables. The transient response is enhanced in terms of maximum overshoot and settling time. This is demonstrated using the deviation between the behavior of some important variables with StatCom, but without or with PSS. A B-Spline neural networks algorithm is used to define the best controllers’ gains to efficiently attenuate low frequency oscillations when a short circuit event is presented. This strategy avoids the parameters and power system model dependency; only a dataset of typical variable measurements is required to achieve the expected behavior. The inclusion of PSS and StatCom with positive interaction, enhances the dynamic performance of the system while illustrating the ability of the strategy in adding different controllers in only one design stage.

scholarly journals Predicting AC Optimal Power Flows: Combining Deep Learning and Lagrangian Dual Methods

2020 ◽  
Vol 34 (01) ◽  
pp. 630-637 ◽  
Author(s):  
Ferdinando Fioretto ◽  
Terrence W.K. Mak ◽  
Pascal Van Hentenryck
Keyword(s):  
Deep Learning ◽  
Power Systems ◽  
Power Flow ◽  
Optimal Power Flow ◽  
Large Scale ◽  
Renewable Energy Sources ◽  
Electrical Power ◽  
Practical Applications ◽  
Fundamental Building Block ◽  
Optimal Power

The Optimal Power Flow (OPF) problem is a fundamental building block for the optimization of electrical power systems. It is nonlinear and nonconvex and computes the generator setpoints for power and voltage, given a set of load demands. It is often solved repeatedly under various conditions, either in real-time or in large-scale studies. This need is further exacerbated by the increasing stochasticity of power systems due to renewable energy sources in front and behind the meter. To address these challenges, this paper presents a deep learning approach to the OPF. The learning model exploits the information available in the similar states of the system (which is commonly available in practical applications), as well as a dual Lagrangian method to satisfy the physical and engineering constraints present in the OPF. The proposed model is evaluated on a large collection of realistic medium-sized power systems. The experimental results show that its predictions are highly accurate with average errors as low as 0.2%. Additionally, the proposed approach is shown to improve the accuracy of the widely adopted linear DC approximation by at least two orders of magnitude.

scholarly journals Enhancing Oscillation Damping in an Interconnected Power System with Integrated Wind Farms Using Unified Power Flow Controller

Energies ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 322 ◽  
Author(s):  
Ping He ◽  
Seyed Arefifar ◽  
Congshan Li ◽  
Fushuan Wen ◽  
Yuqi Ji ◽  
...  
Keyword(s):  
Power Systems ◽  
Power System ◽  
Time Domain ◽  
Power Flow ◽  
Unified Power Flow Controller ◽  
Time Domain Simulation ◽  
Interconnected Power System ◽  
Dynamic Time ◽  
Oscillation Damping ◽  
Power Flow Controller

The well-developed unified power flow controller (UPFC) has demonstrated its capability in providing voltage support and improving power system stability. The objective of this paper is to demonstrate the capability of the UPFC in mitigating oscillations in a wind farm integrated power system by employing eigenvalue analysis and dynamic time-domain simulation approaches. For this purpose, a power oscillation damping controller (PODC) of the UPFC is designed for damping oscillations caused by disturbances in a given interconnected power system, including the change in tie-line power, the changes of wind power outputs, and others. Simulations are carried out for two sample power systems, i.e., a four-machine system and an eight-machine system, for demonstration. Numerous eigenvalue analysis and dynamic time-domain simulation results confirm that the UPFC equipped with the designed PODC can effectively suppress oscillations of power systems under various disturbance scenarios.

scholarly journals The Flexible Operation of Coal Power and Its Renewable Integration Potential in China

2019 ◽  
Vol 11 (16) ◽  
pp. 4424 ◽  
Author(s):  
Chunning Na ◽  
Huan Pan ◽  
Yuhong Zhu ◽  
Jiahai Yuan ◽  
Lixia Ding ◽  
...  
Keyword(s):  
Renewable Energy ◽  
Power Systems ◽  
Power System ◽  
Large Scale ◽  
Renewable Integration ◽  
Flexible Resources ◽  
Feasible Option ◽  
Coal Power ◽  
Simulation Results ◽  
Flexible Operation

At present time, China’s power systems face significant challenges in integrating large-scale renewable energy and reducing the curtailed renewable energy. In order to avoid the curtailment of renewable energy, the power systems need significant flexibility requirements in China. In regions where coal is still heavily relied upon for generating electricity, the flexible operations of coal power units will be the most feasible option to face these challenges. The study first focused on the reasons why the flexible operation of existing coal power units would potentially promote the integration of renewable energy in China and then reviewed the impacts on the performance levels of the units. A simple flexibility operation model was constructed to estimate the integration potential with the existing coal power units under several different scenarios. This study’s simulation results revealed that the existing retrofitted coal power units could provide flexibility in the promotion of the integration of renewable energy in a certain extent. However, the integration potential increment of 20% of the rated power for the coal power units was found to be lower than that of 30% of the rated power. Therefore, by considering the performance impacts of the coal power units with low performances in load operations, it was considered to not be economical for those units to operate at lower than 30% of the rated power. It was believed that once the capacity share of the renewable energy had achieved a continuously growing trend, the existing coal power units would fail to meet the flexibility requirements. Therefore, it was recommended in this study that other flexible resources should be deployed in the power systems for the purpose of reducing the curtailment of renewable energy. Furthermore, based on this study’s obtained evidence, in order to realize a power system with high proportions of renewable energy, China should strive to establish a power system with adequate flexible resources in the future.

Decentralized H ∞ control for damping power system oscillations

2012 ◽  
Vol 2 (1) ◽  
Author(s):  
Guo-Jie Li ◽  
Tek Lie
Keyword(s):  
Power Systems ◽  
Power System ◽  
Large Scale ◽  
Digital Simulation ◽  
Design Procedure ◽  
Disturbance Attenuation ◽  
System Stability ◽  
Frequency Noise ◽  
Stability Robustness ◽  
Norm Bound

AbstractInter-area oscillations are serious problems to large-scale power systems. A decentralized H ∞ generator excitation controller of a power system is proposed to damp the inter-area oscillations and to enhance power system stability. The design procedure for a linear composite system is presented in terms of positive semi-definite solutions to modified algebraic inequalities. The resulting controller guarantees closed-loop stability, robustness and an H ∞-norm bound on disturbance attenuation even under uncertainties such as high frequency noise. The control is decentralized in the sense that the control of each generator depends on local information only. The effectiveness of the H ∞ controller is demonstrated through digital simulation studies on a two-machine power system.

scholarly journals A modular parallelization framework for power flow transfer analysis of large-scale power systems

2017 ◽  
Vol 6 (4) ◽  
pp. 679-690
Author(s):  
Chuntian CHENG ◽  
Bin LUO ◽  
Jianjian SHEN ◽  
Shengli LIAO
Keyword(s):  
Power Systems ◽  
Power Flow ◽  
Large Scale ◽  
Flow Transfer
Sign in / Sign up

Export Citation Format

Share Document