scholarly journals Cross Regulation Reduced Optimal Multivariable Controller Design for Single Inductor DC-DC Converters

Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 477 ◽  
Author(s):  
S. Augusti Lindiya ◽  
N. Subashini ◽  
K. Vijayarekha
Keyword(s):  
Pid Controller ◽  
Controller Design ◽  
Multiple Input Multiple Output ◽  
Linear Quadratic Regulator ◽  
Prototype Model ◽  
Linear Quadratic ◽  
Load Current ◽  
Practical Applications ◽  
Input Multiple Output ◽  
Single Input

Single Inductor (SI) converters with the advantage of using one inductor for any number of inputs/outputs find wide applications in portable electronic gadgets and electrical vehicles. SI converters can be used in Single Input Multiple Output (SIMO) and Multiple Input Multiple Output (MIMO) configurations but they need controllers to achieve good transient and steady state responses, to improve the stability against load and line disturbances and to reduce cross regulation. Cross regulation is the change in an output voltage due to change in the load current at another output and it is an added constraint in SI converters. In this paper, Single Input Dual Output (SIDO) and Dual Input Dual Output (DIDO) converters with applications capable of handling high load current working in Continuous Conduction Mode (CCM) of operation are taken under study. Conventional multivariable PID and optimal Linear Quadratic Regulator (LQR) controllers are developed and their performances are compared for the above configurations to meet the desired objectives. Generalized mathematical models for SIMO and MIMO are developed and a Genetic Algorithm (GA) is used to find the parameters of a multivariable PID controller and the weighting matrices of optimal LQR where the objective function includes cross regulation as a constraint. The simulated responses reveal that LQR controller performs well for both the systems over multivariable PID controller and they are validated by hardware prototype model with the help of DT9834® Data Acquisition Module (DAQ). The methodologies used here generate a fresh dimension for the case of such converters in practical applications.

scholarly journals MIMO PID Controller Tuning Method for Quadrotor Based on LQR/LQG Theory

Robotics ◽  
2019 ◽  
Vol 8 (2) ◽  
pp. 36 ◽  
Author(s):  
Rafael Guardeño ◽  
Manuel J. López ◽  
Víctor M. Sánchez
Keyword(s):  
Pid Controller ◽  
Controller Design ◽  
Low Cost ◽  
Robustness Analysis ◽  
Linear Quadratic Regulator ◽  
Linear Quadratic ◽  
Estimation Errors ◽  
Plant Model ◽  
Bias Drift ◽  
Noise Characteristics

In this work, a new pre-tuning multivariable PID (Proportional Integral Derivative) controllers method for quadrotors is put forward. A procedure based on LQR/LQG (Linear Quadratic Regulator/Gaussian) theory is proposed for attitude and altitude control, which suposes a considerable simplification of the design problem due to only one pretuning parameter being used. With the aim to analyze the performance and robustness of the proposed method, a non-linear mathematical model of the DJI-F450 quadrotor is employed, where rotors dynamics, together with sensors drift/bias properties and noise characteristics of low-cost commercial sensors typically used in this type of applications are considered. In order to estimate the state vector and compensate bias/drift effects in the measures, a combination of filtering and data fusion algorithms (Kalman filter and Madgwick algorithm for attitude estimation) are proposed and implemented. Performance and robustness analysis of the control system is carried out by employing numerical simulations, which take into account the presence of uncertainty in the plant model and external disturbances. The obtained results show the proposed controller design method for multivariable PID controller is robust with respect to: (a) parametric uncertainty in the plant model, (b) disturbances acting at the plant input, (c) sensors measurement and estimation errors.

scholarly journals Optimal tuning linear quadratic regulator for gas turbine by genetic algorithm using integral time absolute error

2020 ◽  
Vol 10 (2) ◽  
pp. 1367
Author(s):  
Jamal M. Ahmed
Keyword(s):  
Genetic Algorithm ◽  
Gas Turbine ◽  
Mimo Systems ◽  
Multiple Input Multiple Output ◽  
Linear Quadratic Regulator ◽  
Absolute Error ◽  
Linear Quadratic ◽  
Integral Time ◽  
Common Control ◽  
Input Multiple Output

For multiple input-multiple output (MIMO) systems, the most common control strategy is the linear quadratic regulator (LQR) which relies on state vector feedback. Despite this strategy gives very good result, it still has trial and error procedure to select the values of its weight matrices which plays a important role in reaching to the desiered system performance. In order to overcome this problem, the Genetic algorithm is used. The design of genetic algorithm based linear quadratic regulator (GA-LQR) utilized Integral time absolute error (ITAE) as a cost function for optimization. The propsed procedure is implemented on a linear model of gas turbine to control the generator spool’s speed and the output power.

Stabilizing and Swinging-Up the Inverted Pendulum Using PI and PID Controllers Based on Reduced Linear Quadratic Regulator Tuned by PSO

2015 ◽  
Vol 4 (4) ◽  
pp. 52-69 ◽  
Author(s):  
M. E. Mousa ◽  
M. A. Ebrahim ◽  
M. A. Moustafa Hassan
Keyword(s):  
Pid Controller ◽  
Inverted Pendulum ◽  
Research Work ◽  
Linear Quadratic Regulator ◽  
Nonlinear Problems ◽  
Pid Controllers ◽  
Linear Quadratic ◽  
Swarm Optimization ◽  
Feed Forward ◽  
Forward Gain

The inherited instabilities in the Inverted Pendulum (IP) system make it one of the most difficult nonlinear problems in the control theory. In this research work, Proportional –Integral and Derivative (PID) Controller with a feed forward gain is used with Reduced Linear Quadratic Regulator (RLQR) for stabilizing the Cart Position and Swinging-up the Pendulum angle. Tuning the Controllers' gains is achieved by using Particle Swarm Optimization (PSO) Technique. Obtaining the combined PID controllers' gains with a feed forward gain and RLQR is a multi-dimensions control problem. The Proposed Controllers give minimum Settling Time, Rise Time, Undershoot and Over shoot for both the Cart Position and the Pendulum angle. A disturbance with different amplitudes is applied to the system, and the results showed the robustness of the systems based on the tuned controllers. The overall results are promising.

scholarly journals Simulation of a Steam Injected Gas Turbine Plant Control System

1997 ◽  
Author(s):  
Shusheng Zang ◽  
Jaqiang Pan
Keyword(s):  
Gas Turbine ◽  
Flow Rate ◽  
Controller Design ◽  
Dynamic Performance ◽  
Linear Quadratic Regulator ◽  
Linear Quadratic ◽  
Turbine Plant ◽  
Fuel Flow ◽  
Lqr Controller ◽  
Gas Turbine Plant

The design of a modern Linear Quadratic Regulator (LQR) is described for a test steam injected gas turbine (STIG) unit. The LQR controller is obtained by using the fuel flow rate and the injected steam flow rate as the output parameters. To meet the goal of the shaft speed control, a classical Proportional Differential (PD) controller is compared to the LQR controller design. The control performance of the dynamic response of the STIG plant in the case of rejection of load is evaluated. The results of the computer simulation show a remarkable improvement on the dynamic performance of the STIG unit.

Backstepping Controller Design for a 5 DOF Spherical Inverted Pendulum

2019 ◽  
Vol 41 ◽  
pp. 37-50 ◽  
Author(s):  
Soukaina Krafes ◽  
Zakaria Chalh ◽  
Abdelmjid Saka
Keyword(s):  
Degrees Of Freedom ◽  
Inverted Pendulum ◽  
Controller Design ◽  
Linear Quadratic Regulator ◽  
Performance Comparison ◽  
Virtual Reality Environment ◽  
Linear Quadratic ◽  
Control Scheme ◽  
Linearized System ◽  
Backstepping Controller

This paper presents a Backstepping controller for five degrees of freedom Spherical Inverted Pendulum. Since the system is nonlinear, unstable, underactuated and MIMO and has a nonsquare form, the classic control design cannot be applied to control it. In order to remedy this problem, we propose in this paper a new method based on hierarchical steps of the Backstepping controller taking into a count the nonlinearities that cannot be neglected. Furthermore, a Linear Quadratic Regulator controller and LQR + PID based on the linearized system model are also designed for performance comparison. Finally, a simulation study is carried out to prove the effectiveness of proposed control scheme and is validated using the virtual reality environment that proves the performance of the Backstepping controller over the linear ones where it brings the pendulum from any initial condition in the upper hemisphere while the base is brought to the origin of the coordinates.

Augmented-Stability Controller Design for a UAV’s Longitudinal Motion

2011 ◽  
Vol 63-64 ◽  
pp. 533-536
Author(s):  
Xiao Jun Xing ◽  
Jian Guo Yan
Keyword(s):  
Dynamic Characteristics ◽  
Controller Design ◽  
Damping Ratio ◽  
Linear Quadratic Regulator ◽  
Longitudinal Motion ◽  
Linear Quadratic ◽  
Short Period ◽  
Quality Specifications ◽  
Simulation Results ◽  
And Control

With the purpose of overcoming the defect that unmanned air vehicles (UAVs) are easily disturbed by air current and tend to be unstable, an augmented-stability controller was developed for a certain UAV’s longitudinal motion. According to requirements of short-period damping ratio and control anticipation parameter (CAP) in flight quality specifications of GJB185-86 and C*, linear quadratic regulator (LQR) theory was used in the augmented-stability controller’s design. The simulation results show that the augmented-stability controller not only improves the UAV’s stability and dynamic characteristics but also enhances the UAV’s robustness.

Novel Method on Using Evolutionary Algorithms for PD Optimal Tuning

2011 ◽  
Vol 110-116 ◽  
pp. 4977-4984 ◽  
Author(s):  
R.A. Khoshrooz ◽  
M.A.D. Vahid ◽  
M. Mirshams ◽  
M.R. Homaeinezhad ◽  
A.H. Ahadi
Keyword(s):  
Attitude Control ◽  
Controller Design ◽  
Linear Quadratic Regulator ◽  
Initial Guess ◽  
Pd Controller ◽  
Linear Quadratic ◽  
Optimal Tuning ◽  
Heavy Burden ◽  
Novel Method

This paper presents a method to solve the Evolutionary Algorithm (EA) problems for optimal tuning of the Proportional-Deferential (PD) controller parameters. The major efficiency of the proposed method is the Genetic Algorithm (GA) stuck avoidance as well an appropriate estimation for GA lower and upper bounds. Also by this method for the Particle Swarm Optimization (PSO) methodology the initial choice of the controller parameters can be fulfilled to achieve the acceptable performance accuracies. For both GA and PSO methods, the Linear Quadratic Regulator (LQR) obtained trend is used as the reference for the determination of the aforementioned bounds and initial guess. The presented algorithm was applied to regulate a PD controller for the attitude control of a virtual satellite and also with Hardware-in-the-loop (HIL) reaction wheels. Heavy burden trying and error was eliminated from the PD controller design which can be mentioned as the important merit of the presented study.

The Parameterization of All Plants Stabilized by Proportional Controller Formultiple-Input/Multiple-Output Plant

2011 ◽  
Vol 497 ◽  
pp. 246-254
Author(s):  
Takaaki Hagiwara ◽  
Kou Yamada ◽  
Satoshi Aoyama ◽  
An Chinh Hoang
Keyword(s):  
Pid Controller ◽  
Multiple Input Multiple Output ◽  
Pid Controllers ◽  
Proportional Integral Derivative ◽  
Proportional Integral ◽  
Multiple Input ◽  
Input Multiple Output ◽  
Proportional Controller

In this paper, we examine the parameterization of all plants stabilized by a proportionalcontroller for multiple-input/multiple-output plant. A proportional controller is a kind of Proportional-Integral-Derivative (PID) controllers. PID controller structure is the most widely used one in industrialapplications. Recently, if stabilizing PID controllers for the plant exist, the parameterization of allstabilizing PID controllers has been considered. However, no paper examines the parameterizationof all plants stabilized by a PID controller. In this paper, we clarify the parameterization of all plantsstabilized by a proportional controller for multiple-input/multiple-output plant. In addition, we presentthe parameterization of all stabilizing proportional controllers for the plant stabilized by a proportionalcontroller.

The Design of Hopping Angle Control by Using PID and LQR Techniques

2013 ◽  
Vol 419 ◽  
pp. 693-700
Author(s):  
Saifullah Samo ◽  
Shu Yuan Ma ◽  
Bdran Sameh
Keyword(s):  
Pid Controller ◽  
Linear Quadratic Regulator ◽  
Dc Motor ◽  
Linear Quadratic ◽  
Matlab Simulink ◽  
Hopping Robot ◽  
Hopping Robots ◽  
Obstacle Height

It is very difficult for hopping robots to follow the trajectory without controlling hopping angle. A hopping angle controller is designed for combustion piston type hopping robot to adjust the angle of hop which is required to achieve a desired distance or height. So, the controller adds functionality to hopping robot for altering the hopping angle during operation according to obstacle height and obstacle distance. A proportional Integrated Derivative (PID) and Linear Quadratic Regulator (LQR) are designed and compared for adjusting hopping angle by using MATLAB / SIMULINK environment. As result, both controllers are capable to control hopping angle but PID gives better performance. An implementation of PID controller for the hopping angle control is given by using a DC motor. The experiment also carried out on prototype by using PID controller and found satisfactory results.

scholarly journals Actuator Placement for Active Surge Control in a Multi-Stage Axial Compressor

1996 ◽  
Author(s):  
M. Montazeri-Gh. ◽  
D. J. Allerton ◽  
R. L. Elder
Keyword(s):  
Cost Function ◽  
Mass Flow ◽  
Controller Design ◽  
Axial Compressor ◽  
Minimum Cost ◽  
Linear Quadratic Regulator ◽  
Algebraic Riccati Equation ◽  
Linear Quadratic ◽  
Non Linear ◽  
Actuator Placement

This paper describes an actuator placement methodology for the active control of purely one-dimensional instabilities of a seven-stage axial compressor using an air bleeding strategy. In this theoretical study, using stage-by-stage non-linear modelling based on the conservation equations of mass, momentum, and energy, a scheduling LQR (Linear Quadratic Regulator) controller is designed for several actuator locations in a compressor from the first stage to the plenum. In this controller design, the LQR weighting matrices are selected so that the associated cost function includes only air bleeding mass flow leading to the minimisation of the air bleed. The LQR cost function represents a measure of the consumption of air bleeding and can be calculated analytically using the solution of an Algebraic Riccati Equation. From analysis of the cost at different compressor stages, the location of an air bleeding actuator is selected at the stage with the minimum cost. Finally, using an ACSL simulation program, the scheduling controller has been integrated with a non-linear. stage-by-stage model and the time response of the air bleeding mass flow at different locations has been obtained to confirm the results from the analytical approach. Results are presented to show actively stabilised compressor flow beyond the surge point where the air bleed is minimised. These results also indicate the preferred location of the actuator at the compressor downstream stages for both low and high compressor speeds.

Sign in / Sign up

Export Citation Format

Share Document