scholarly journals Torque Ripple Optimization of a Novel Cylindrical Arc Permanent Magnet Synchronous Motor Used in a Large Telescope

Energies ◽  
2019 ◽  
Vol 12 (3) ◽  
pp. 362
Author(s):  
Shuhua Fang ◽  
Songhan Xue ◽  
Zhenbao Pan ◽  
Hui Yang ◽  
Heyun Lin
Keyword(s):  
Permanent Magnet ◽  
Permanent Magnet Synchronous Motor ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Direct Drive ◽  
Large Telescope ◽  
Tracking Accuracy ◽  
Cogging Torque ◽  
Low Torque ◽  
Large Telescopes

This paper proposes the use of a novel cylindrical arc permanent magnet synchronous motor (CAPMSM) in a large telescope, which requires high positioning accuracy and low torque ripple. A 2D finite element method was used to analyze the cogging torque of the CAPMSM. The CAPMSM can be an alternative for a rotating motor to realize direct drive. A new method is proposed to separate the cogging torque, Tcog, into the torque, Tslot, generated by the slotted effect and the end torque, Tend, generated by the end effect. The average torque and the torque ripple are optimized considering stator center angle, the angle between two adjacent stators and the unequal thickness of a Halbach permanent magnet. The torque ripple decreased from 31.73% to 1.17%, which can satisfy the requirement of tracking accuracy for large telescopes.

scholarly journals Direct Torque Control of Dual Three-Phase Permanent Magnet Synchronous Motor

2021 ◽  
Vol 297 ◽  
pp. 01017
Author(s):  
Fouad Labchir ◽  
Mhammed Hasoun ◽  
Aziz El Afia ◽  
Karim Benkirane ◽  
Mohamed Khafallah
Keyword(s):  
Permanent Magnet ◽  
Permanent Magnet Synchronous Motor ◽  
Direct Torque Control ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Torque Control ◽  
Stator Windings ◽  
Torque Control Strategy ◽  
Three Phase ◽  
Low Torque

In this paper a direct torque control strategy for dual three-phase permanent magnet synchronous motor (DTP-PMSM) is presented, the machine has two sets of three-phase stator windings spatially phase shifted by 30 electric degrees. In order to reduce the stator harmonic current, torque and flux are controlled based on regulators and Vector Space Decomposition technique. The proposed approach has the benefits of low stator current distortion and low torque ripple. The validity and the efficiency of the selected technique are confirmed by simulation results.

Development and Application of Low-Speed and High-Torque Permanent Magnet Synchronous Motor

2012 ◽  
Vol 229-231 ◽  
pp. 888-894 ◽  
Author(s):  
Jun Guo Cui ◽  
Wen Sheng Xiao ◽  
Jian Bo Zhao ◽  
Jing Xi Lei ◽  
Xiao Dong Wu ◽  
...  
Keyword(s):  
Permanent Magnet ◽  
Permanent Magnet Synchronous Motor ◽  
Torque Ripple ◽  
Synchronous Motor ◽  
Economic Benefits ◽  
Direct Drive ◽  
Low Speed ◽  
Wide Range ◽  
High Torque ◽  
Pumping Unit

To meet the demands of direct-drive petroleum equipment, developed a low-speed and high-torque permanent magnet synchronous motor. By analyzing and identifying the suitable key parameters such as permanent magnet structure parameters, air gap length, type and size of Stator Slot and so on, designed permanent magnet synchronous motor with the torque 10800 Nm, the rated speed 30 r/min and high efficiency and power factor. Obtained the flux density distribution situation and characteristic curves under no-load working condition through simulation and analysis. Manufactured the low-speed and high-torque permanent magnet synchronous motor and applied it to pumping unit. Test results show that this motor has many advantages such as wide range of speed regulation, small torque ripple, smooth operation and other characteristics. The Direct-drive Pumping Unit used this permanent magnet synchronous motor can save 20% energy than the beam pumping unit, so its social and economic benefits are significant.

Sign in / Sign up

Export Citation Format

Share Document