scholarly journals Parametric Study of a Gurney Flap Implementation in a DU91W(2)250 Airfoil

Energies ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 294 ◽  
Author(s):  
Iñigo Aramendia ◽  
Unai Fernandez-Gamiz ◽  
Ekaitz Zulueta ◽  
Aitor Saenz-Aguirre ◽  
Daniel Teso-Fz-Betoño
Keyword(s):  
Prediction Model ◽  
Parametric Study ◽  
Aerodynamic Performance ◽  
Slight Improvement ◽  
Aerodynamic Efficiency ◽  
Flow Control Devices ◽  
Gurney Flap ◽  
Control Devices ◽  
Drag Ratio ◽  
Lift To Drag Ratio

The growth in size and weight of wind turbines over the last years has led to the development of flow control devices, such as Gurney flaps (GFs). In the current work, a parametric study is presented to find the optimal GF length to improve the airfoil aerodynamic performance. Therefore, the influence of GF lengths from 0.25% to 3% of the airfoil chord c on a widely used DU91W(2)250 airfoil has been investigated by means of RANS based numerical simulations at Re = 2 × 106. The numerical results showed that, for positive angles of attack, highest values of the lift-to-drag ratio CL/CD are obtained with GF lengths between 0.25% c and 0.75% c. Particularly, an increase of 21.57 in CL/CD ratio has been obtained with a GF length of 0.5% c at 2° of angle of attack AoA. The influence of GFs decreased at AoAs larger than 5°, where only a GF length of 0.25% c provides a slight improvement in terms of CL/CD ratio enhancement. Additionally, an ANN has been developed to predict the aerodynamic efficiency of the airfoil in terms of CL/CD ratio. This tool allows to obtain an accurate prediction model of the aerodynamic behavior of the airfoil with GFs.

Gurney flap scaling for optimum lift-to-drag ratio

AIAA Journal ◽  
1997 ◽  
Vol 35 ◽  
pp. 1888-1890 ◽  
Author(s):  
Philippe Giguere ◽  
Guy Dumas ◽  
Jean Lemay
Keyword(s):  
Gurney Flap ◽  
Drag Ratio ◽  
Lift To Drag Ratio

Aerodynamic study of single corrugated variable-camber morphing aerofoil concept

2021 ◽  
pp. 1-29
Author(s):  
K. Dhileep ◽  
D. Kumar ◽  
P.N. Gautham Vigneswar ◽  
P. Soni ◽  
S. Ghosh ◽  
...  
Keyword(s):  
Finite Volume ◽  
Interpolation Method ◽  
Beam Theory ◽  
Small Deformation ◽  
Aerodynamic Characteristics ◽  
Ansys Fluent ◽  
Aerodynamic Efficiency ◽  
Finite Element Software ◽  
Drag Ratio ◽  
Lift To Drag Ratio

Abstract Camber morphing is an effective way to control the lift generated by any aerofoil and potentially improve the range (as measured by the lift-to-drag ratio) and endurance (as measured by $C_l^{3/2}/C_d$ ). This can be especially useful for fixed-wing Unmanned Aerial Vehicles (UAVs) undergoing different flying manoeuvres and flight phases. This work investigates the aerodynamic characteristics of the NACA0012 aerofoil morphed using a Single Corrugated Variable-Camber (SCVC) morphing approach. Structural analysis and morphed shapes are obtained based on small-deformation beam theory using chain calculations and validated using finite-element software. The aerofoil is then reconstructed from the camber line using a Radial Basis Function (RBF)-based interpolation method (J.H.S. Fincham and M.I. Friswell, “Aerodynamic optimisation of a camber morphing aerofoil,” Aerosp. Sci. Technol., 2015). The aerodynamic analysis is done by employing two different finite-volume solvers (OpenFOAM and ANSYS-Fluent) and a panel method code (XFoil). Results reveal that the aerodynamic coefficients predicted by the two finite-volume solvers using a fully turbulent flow assumption are similar but differ from those predicted by XFoil. The aerodynamic efficiency and endurance factor of morphed aerofoils indicate that morphing is beneficial at moderate to high lift requirements. Further, the optimal morphing angle increases with an increase in the required lift. Finally, it is observed for a fixed angle-of-attack that an optimum morphing angle exists for which the aerodynamic efficiency becomes maximum.

The aerodynamic optimisation of a low-Reynolds paper plane with adjoint method

2020 ◽  
pp. 1-15
Author(s):  
Y. Zhang ◽  
X. Zhang ◽  
G. Chen
Keyword(s):  
Adjoint Method ◽  
Low Cost ◽  
Aerodynamic Performance ◽  
Discrete Adjoint ◽  
Design Variables ◽  
Limited Variation ◽  
Aerial Vehicle ◽  
Paper Plane ◽  
Drag Ratio ◽  
Lift To Drag Ratio

ABSTRACT The aerodynamic performance of a deployable and low-cost unmanned aerial vehicle (UAV) is investigated and improved in present work. The parameters of configuration, such as airfoil and winglet, are determined via an optimising process based on a discrete adjoint method. The optimised target is locked on an increasing lift-to-drag ratio with a limited variation of pitching moments. The separation that will lead to a stall is delayed after optimisation. Up to 128 design variables are used by the optimised solver to give enough flexibility of the geometrical transformation. As much as 20% enhancement of lift-to-drag ratio is gained at the cruise angle-of-attack, that is, a significant improvement in the lift-to-drag ratio adhering to the preferred configuration is obtained with increasing lift and decreasing drag coefficients, essentially entailing an improved aerodynamic performance.

scholarly journals Parametric study toward optimization of blowing and suction locations for improving lift-to-drag ratio on a Clark-Y airfoil

2020 ◽  
Vol 15 (2) ◽  
pp. JFST0008-JFST0008 ◽  
Author(s):  
Masahiro OHASHI ◽  
Yuki MORITA ◽  
Shiho HIROKAWA ◽  
Koji FUKAGATA ◽  
Naoko TOKUGAWA
Keyword(s):  
Parametric Study ◽  
Drag Ratio ◽  
Lift To Drag Ratio

Numerical Study of Improving Aerodynamic Performance of the Cylinder Airfoil of Magnus Wind Turbine

2013 ◽  
Vol 650 ◽  
pp. 414-419
Author(s):  
Qi Yao ◽  
Ying Xue Yao ◽  
Liang Zhou ◽  
Jin Ming Wu ◽  
Jian Guang Li
Keyword(s):  
Fluid Dynamics ◽  
Drag Force ◽  
Numerical Study ◽  
Rotating Cylinder ◽  
Aerodynamic Performance ◽  
Orthogonal Test ◽  
Performance Change ◽  
Result Show ◽  
Drag Ratio ◽  
Lift To Drag Ratio

To solve the problem of low lift to drag ratio of Magnus cylinder airfoil, the Computational Fluid Dynamics software Fluent was used to study the principle of a drop of the drag force of cylinder when rotating. And the principle was used to further reduce the drag of rotating cylinder. A traditional airfoil head and a triangle tail was used to study the effect of the aerodynamic performance change of the combined airfoil. A conclusion was made that with a suitable profile of the tail would reduce the drag force of the combined airfoil thus increase the lift to drag ratio of the airfoil. At last an orthogonal test was made to determine the size of the tail airfoil. The result show that the optimized airfoil reduce the drag force to 50% of the original cylinder and improve the lift to drag ratio to 50%.

Research on Improved Method of Wind Turbine Airfoil S834 Based on Noise and Aerodynamic Performance

2015 ◽  
Vol 744-746 ◽  
pp. 253-258 ◽  
Author(s):  
Ya Qiong Chen ◽  
Yue Fa Fang
Keyword(s):  
Wind Turbine ◽  
Optimization Design ◽  
Design Method ◽  
Aerodynamic Performance ◽  
Parametric Modeling ◽  
Multi Objective ◽  
Wind Turbine Airfoil ◽  
Drag Ratio ◽  
Operating Points ◽  
Lift To Drag Ratio

In this paper, aerodynamic performance and noise of the wind turbine airfoil are the optimization design goal and based on this, the optimization design method with multi-operating points and multi-objective of the airfoils is built. The Bezier curve is used in parametric modeling of the contour of the airfoil and the general equation for control points is deduced form the discrete points coordinates of the airfoil. The weigh distribution schemes for multi-objective and multi-operating points are integrated designed by treating the NREL S834 airfoil as the initial airfoils. The results show that the lift-to-drag ratio of the optimized airfoils has a improvement around the designed operating angle and the overall noise has a reduction compared with the initial airfoils, which means that the optimized airfoils get a better aerodynamic and acoustic performance.

scholarly journals Aerodynamic Optimization of an Over-the-Wing-Nacelle-Mount Configuration

2011 ◽  
Vol 2011 ◽  
pp. 1-13 ◽  
Author(s):  
Daisuke Sasaki ◽  
Kazuhiro Nakahashi
Keyword(s):  
Interference Effect ◽  
Jet Engines ◽  
Aerodynamic Design ◽  
Aerodynamic Optimization ◽  
High Lift ◽  
Aerodynamic Efficiency ◽  
Wing Geometry ◽  
Aerodynamic Interference ◽  
Drag Ratio ◽  
Lift To Drag Ratio

An over-the-wing-nacelle-mount airplane configuration is known to prevent the noise propagation from jet engines toward ground. However, the configuration is assumed to have low aerodynamic efficiency due to the aerodynamic interference effect between a wing and a nacelle. In this paper, aerodynamic design optimization is conducted to improve aerodynamic efficiency to be equivalent to conventional under-the-wing-nacelle-mount configuration. The nacelle and wing geometry are modified to achieve high lift-to-drag ratio, and the optimal geometry is compared with a conventional configuration. Pylon shape is also modified to reduce aerodynamic interference effect. The final wing-fuselage-nacelle model is compared with the DLR F6 model to discuss the potential of Over-the-Wing-Nacelle-Mount geometry for an environmental-friendly future aircraft.

Modification impact on aerodynamic performance of hypersonic waverider

2011 ◽  
Vol 115 (1168) ◽  
pp. 325-334 ◽  
Author(s):  
C. Xiao-Qing ◽  
H. Zhong-Xi ◽  
L. Jian-Xia ◽  
G. Xian-Zhong
Keyword(s):  
Leading Edge ◽  
Aerodynamic Performance ◽  
Hypersonic Vehicles ◽  
Flow Conditions ◽  
Aerodynamic Coefficient ◽  
High Lift ◽  
Computational Fluid Dynamics Cfd ◽  
Drag Ratio ◽  
Lift To Drag Ratio ◽  
Sharp Leading Edge

Abstract Waverider serves as a good candidate for hypersonic vehicles. The typical waverider has sharp leading edge and no control face, which is inappropriate for practical use. This paper puts forward a method modifying the waverider, and the modification impact on the performance of waverider at hypersonic flow conditions is studied. The modification is based on blunted waverider, includes cutting the tip and introducing two control wings. The modification’s effect on aerodynamic performance is obtained and analysed through Computational Fluid Dynamics (CFD) techniques. When blunted with 2cm radius, the waverider retains its good aerodynamic performance and the heat flux at the stagnation point can be managed. Three factors of the introduced wing are argued, the fixed angle, aspect ratio and wing area. Results show that influence on the aerodynamic coefficient is slight and the vehicle retains its high lift-to-drag ratio. The main influences of the modification are the control ability and trim efficiency, which is the motivation of this work and can be adapted when designing a practical waverider.

scholarly journals RESEARCH OF WING DIHEDRAL ANGLE EFFECT ON AERODYNAMIC PERFORMANCE OF TANDEM-WING UNMANNED AERIAL VEHICLE

2013 ◽  
pp. 90-101
Author(s):  
І. С. Кривохатько
Keyword(s):  
Dihedral Angle ◽  
Aerodynamic Characteristics ◽  
Aerodynamic Performance ◽  
Theoretical Explanation ◽  
Wing Span ◽  
Induced Drag ◽  
Rear Wing ◽  
Angle Effect ◽  
Drag Ratio ◽  
Lift To Drag Ratio

In the last decade folding tube launch UAV became common, for which aerodynamic scheme "tandem" is reasonable. By the time tandem-wing aerodynamic characteristics are researched much less than ones of traditional scheme. Particularly it concerns wing dihedral angle effect on lift-to-drag ratio about which no quantitative data were found.Forward or rear wing dihedral angle appearance result in circulation redistribution and changing of rear wing induced drag. Rear wing dihedral angle effect on longitudinal aerodynamic performance of tandem-wing UAV model was researched through wind tunnel experiment. Geometry variables were forward and rear wing spans, rear wing dihedral angle and longitudinal stagger. Lift, drag and longitudinal moment coefficients were defined.The possibility of lift-to-drag ratio increasing at cruise regime was proofed. Rear wing negative dihedral angle application is able to increase maximal lift-to-drag ratio by more than 1.0 or about 10 %.It was found that wing dihedral angle effectiveness depends from relation of forward and rear wing spans and from longitudinal stagger. Longitudinal stagger increasing results in dihedral angle effectiveness falling if forward wing span is higher than rear wing. For bigger rear wing span increasing of longitudinal stagger results in dihedral angle effectiveness gaining. The hypothesis was declared that proposes theoretical explanation of experimentally founded dependencies.Also dihedral angle appearance increases lift slope because of rear wing carrying capacity gain and has almost no influence on maximal lift coefficient.All dependencies founded for rear wing negative dihedral angle are correct for forward wing positive dihedral angle except the last one is increasing longitudinal and lateral stability.

CFD analysis of variable geometric angle winglets

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ali Hussain Kazim ◽  
Abdullah Hamid Malik ◽  
Hammad Ali ◽  
Muhammad Usman Raza ◽  
Awais Ahmad Khan ◽  
...  
Keyword(s):  
Aerodynamic Performance ◽  
Sweep Angle ◽  
Content Type ◽  
Wing Model ◽  
Induced Drag ◽  
Computational Fluid Dynamics Analysis ◽  
Attached Flow ◽  
Drag Ratio ◽  
Fuel Costs ◽  
Lift To Drag Ratio

Purpose Winglets play a major role in saving fuel costs because they reduce the lift-induced drag formed at the wingtips. The purpose of this paper is to obtain the best orientation of the winglet for the Office National d’Etudes et de Recherches Aérospatiales (ONERA) M6 wing at Mach number 0.84 in terms of lift to drag ratio. Design/methodology/approach A computational fluid dynamics analysis of the wing-winglet configuration based on the ONERA M6 airfoil on drag reduction for different attack angles at Mach 0.84 was performed using analysis of systems Fluent. First, the best values of cant and sweep angles in terms of aerodynamic performance were selected by performing simulations. The analysis included cant angle values of 30°, 40°, 45°, 55°, 60°, 70° and 75°, while for the sweep angles 35°, 45°, 55°, 65° and 75° angles were used. The aerodynamic performance was measured in terms of the obtained lift to drag ratios. Findings The results showed that slight alternations in the winglet configuration can improve aerodynamic performance for various attack angles. The best lift to drag ratio for the winglet was achieved at a cant angle of 30° and a sweep angle of 65°, which caused a 5.33% increase in the lift to drag ratio. The toe-out angle winglets as compared to the toe-in angles caused the lift to drag ratio to increase because of more attached flow at its surface. The maximum value of the lift to drag ratio was obtained with a toe-out angle (−5°) at an angle of attack 3° which was 2.53% greater than the zero-toed angle winglet. Originality/value This work is relatively unique because the cant, sweep and toe angles were analyzed altogether and led to a significant reduction in drag as compared to wing without winglet. The wing model was compared with the results provided by National Aeronautics and Space Administration so this validated the simulation for different wing-winglet configurations.

Sign in / Sign up

Export Citation Format

Share Document