scholarly journals An Aero-acoustic Noise Distribution Prediction Methodology for Offshore Wind Farms

Energies ◽  
2018 ◽  
Vol 12 (1) ◽  
pp. 18 ◽  
Author(s):  
Jiufa Cao ◽  
Weijun Zhu ◽  
Xinbo Wu ◽  
Tongguang Wang ◽  
Haoran Xu
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Noise Source ◽  
Acoustic Noise ◽  
Turbine Blades ◽  
Wind Farms ◽  
Noise Generation ◽  
Human Beings ◽  
Wind Turbine Noise

Recently attention has been paid to wind farm noise due to its negative health impact, not only on human beings, but also to marine and terrestrial organisms. The current work proposes a numerical methodology to generate a numerical noise map for a given wind farm. Noise generation from single wind turbines as well as wind farms has its basis in the nature of aerodynamics, caused by the interactions between the incoming turbulent flow and the wind turbine blades. Hence, understanding the mechanisms of airfoil noise generation, demands access to sophisticated numerical tools. The processes of modeling wind farm noise include three steps: (1) The whole wind farm velocity distributions are modelled with an improved Jensen’s wake model; (2) The individual wind turbine’s noise is simulated by a semi-empirical wind turbine noise source model; (3) Propagations of noise from all wind turbines are carried out by solving the parabolic wave equation. In the paper, the wind farm wake effect from the Horns Rev wind farm is studied. Based on the resulted wind speed distributions in the wind farm, the wind turbine noise source and its propagation are simulated for the whole wind farm.

Assessment of the noise produced by wind farms with the acoustically analogous techniques without stopping the noise source

2018 ◽  
Vol 43 (2) ◽  
pp. 201-209
Author(s):  
Gino Iannace ◽  
Amelia Trematerra ◽  
Umberto Berardi
Keyword(s):  
Wind Speed ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Noise Source ◽  
Sound Field ◽  
Wind Farms ◽  
Sound Level ◽  
Acoustic Measurements ◽  
Relative Contribution

In Italy, wind turbines with a nominal power below 1 MW can be installed following simplified authorization procedures and are therefore becoming the preferred choice for promoters. The assessment of the noise of wind farms is not easy, due to economic reasons, with it being difficult to stop and assess the relative contribution of each wind turbine. Several acoustic measurements were taken inside homes located near a wind farm consisting of three wind turbines, each with a nominal power of 1 MW. The acoustic measurements were taken by placing sound level meters inside the houses at different wind speed values and wind directions. The acoustic measurements were taken using the acoustically analogous place technique. For economic reasons, the plant cannot be switched off. In this case, the sound field generated by the operation of the wind turbines was measured by placing two sound level meters in a house.

Effect of Wind Turbine Noise on Workers' Sleep Disorder: A Case Study of Manjil Wind Farm in Northern Iran

2015 ◽  
Vol 14 (02) ◽  
pp. 1550020 ◽  
Author(s):  
Milad Abbasi ◽  
Mohammad Reza Monnazzam ◽  
SayedAbbolfazl Zakerian ◽  
Arsalan Yousefzadeh
Keyword(s):  
Wind Turbine ◽  
Sleep Disorder ◽  
Wind Turbines ◽  
Daytime Sleepiness ◽  
Wind Farm ◽  
Wind Farms ◽  
Sound Level ◽  
Wind Turbine Noise ◽  
The Impact

Noise from wind turbines is one of the most important factors affecting the health, welfare, and human sleep. This research was carried out to study the effect of wind turbine noise on workers' sleep disorder. For this, Manjil Wind Farm, because of the greater number of staff and turbines than other wind farms in Iran, was chosen as case study. A total number of 53 participants took part in this survey. They were classified into three groups of mechanics, security, and official. In this study, daytime sleepiness data of workers were gathered using Epworth Sleepiness Scales (ESS) was used to determine the level of daytime sleepiness among the workers. The 8-h equivalent sound level (LAeq,8h) was measured to determine the individuals' exposure at each occupational group. Finally, the effect of sound, age, and workers' experience on individuals' sleep disorder was analyzed through multiple regression analysis in the R software. The results showed that there was a positive and significant relationship between age, workers' experience, equivalent sound level, and the level of sleep disorder. When age is constant, sleep disorder will increase by 26% as per each 1 dB increase in equivalent sound level. In situations where equivalent sound level is constant, an increase of 17% in sleep disorder is occurred as per each year of work experience. Because of the difference in sound exposure in different occupational groups. The effect of noise in repairing group was about 6.5 times of official group and also 3.4 times of the security group. Sleep disorder effect caused by wind turbine noise in the security group is almost two times more than the official group. Unlike most studies on wind turbine noise that address the sleep disorder among inhabitants nearby wind farms, this study, for the first time in the world, examines the impact of wind turbine noise on sleep disorder of workers who are more closer to wind turbines and exposed to higher levels of noise. So despite all the good benefits of wind turbines, it can be stated that this technology has health risks for all those exposed to its sound. However, further research is needed to confirm the results of this study.

scholarly journals Recent Advances in Wind Turbine Noise Research

Acoustics ◽  
2020 ◽  
Vol 2 (1) ◽  
pp. 171-206 ◽  
Author(s):  
Colin Hansen ◽  
Kristy Hansen
Keyword(s):  
Wind Turbine ◽  
Large Scale ◽  
Wind Farm ◽  
Research Work ◽  
Wind Farms ◽  
Horizontal Axis ◽  
Future Research ◽  
Noise Generation ◽  
Horizontal Axis Wind Turbine ◽  
Wind Turbine Noise

This review is focussed on large-scale, horizontal-axis upwind turbines. Vertical-axis turbines are not considered here as they are not sufficiently efficient to be deployed in the commercial generation of electricity. Recent developments in horizontal-axis wind turbine noise research are summarised and topics that are pertinent to the problem, but are yet to be investigated, are explored and suggestions for future research are offered. The major portion of recent and current research on wind turbine noise generation, propagation and its effects on people and animals is being undertaken by groups in Europe, UK, USA, Japan, Australia and New Zealand. Considerable progress has been made in understanding wind turbine noise generation and propagation as well as the effect of wind farm noise on people, birds and animals. However, much remains to be done to answer many of the questions for which answers are still uncertain. In addition to community concerns about the effect of wind farm noise on people and how best to regulate wind farm noise and check installed wind farms for compliance, there is considerable interest from turbine manufacturers in developing quieter rotors, with the intention of allowing wind farm installations to be closer to populated areas. The purpose of this paper is to summarise recent and current wind farm noise research work and the research questions that remain to be addressed or are in the process of being addressed. Topics that are the subject of on-going research are discussed briefly and references to recent and current work are included.

scholarly journals Analysis of Wind Turbine Aging through Operation Data Calibrated by LiDAR Measurement

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2319
Author(s):  
Hyun-Goo Kim ◽  
Jin-Young Kim
Keyword(s):  
Power Generation ◽  
Wind Speed ◽  
Wind Turbine ◽  
Wind Farm ◽  
Free Stream ◽  
Turbine Blades ◽  
Wind Farms ◽  
Lidar Measurement ◽  
Wind Turbine Blades ◽  
Wake Effect

This study analyzed the performance decline of wind turbine with age using the SCADA (Supervisory Control And Data Acquisition) data and the short-term in situ LiDAR (Light Detection and Ranging) measurements taken at the Shinan wind farm located on the coast of Bigeumdo Island in the southwestern sea of South Korea. Existing methods have generally attempted to estimate performance aging through long-term trend analysis of a normalized capacity factor in which wind speed variability is calibrated. However, this study proposes a new method using SCADA data for wind farms whose total operation period is short (less than a decade). That is, the trend of power output deficit between predicted and actual power generation was analyzed in order to estimate performance aging, wherein a theoretically predicted level of power generation was calculated by substituting a free stream wind speed projecting to a wind turbine into its power curve. To calibrate a distorted wind speed measurement in a nacelle anemometer caused by the wake effect resulting from the rotation of wind-turbine blades and the shape of the nacelle, the free stream wind speed was measured using LiDAR remote sensing as the reference data; and the nacelle transfer function, which converts nacelle wind speed into free stream wind speed, was derived. A four-year analysis of the Shinan wind farm showed that the rate of performance aging of the wind turbines was estimated to be −0.52%p/year.

scholarly journals Floating Performance of a Composite Bucket Foundation with an Offshore Wind Tower during Transportation

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 882 ◽  
Author(s):  
Hongyan Ding ◽  
Zuntao Feng ◽  
Puyang Zhang ◽  
Conghuan Le ◽  
Yaohua Guo
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Interaction Force ◽  
Offshore Wind ◽  
Construction Technique ◽  
Bucket Foundation ◽  
Offshore Wind Turbines ◽  
One Step

The composite bucket foundation (CBF) for offshore wind turbines is the basis for a one-step integrated transportation and installation technique, which can be adapted to the construction and development needs of offshore wind farms due to its special structural form. To transport and install bucket foundations together with the upper portion of offshore wind turbines, a non-self-propelled integrated transportation and installation vessel was designed. In this paper, as the first stage of applying the proposed one-step integrated construction technique, the floating behavior during the transportation of CBF with a wind turbine tower for the Xiangshui wind farm in the Jiangsu province was monitored. The influences of speed, wave height, and wind on the floating behavior of the structure were studied. The results show that the roll and pitch angles remain close to level during the process of lifting and towing the wind turbine structure. In addition, the safety of the aircushion structure of the CBF was verified by analyzing the measurement results for the interaction force and the depth of the liquid within the bucket. The results of the three-DOF (degree of freedom) acceleration monitoring on the top of the test tower indicate that the wind turbine could meet the specified acceleration value limits during towing.

Floating Offshore Wind Turbines: Responses in a Seastate Pareto Optimal Designs and Economic Assessment

2008 ◽  
Author(s):  
Paul Sclavounos ◽  
Christopher Tracy ◽  
Sungho Lee
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Economic Assessment ◽  
Offshore Wind ◽  
Pareto Optimal ◽  
Mooring System ◽  
Floating Structure ◽  
Water Depths

Wind is the fastest growing renewable energy source, increasing at an annual rate of 25% with a worldwide installed capacity of 74 GW in 2007. The vast majority of wind power is generated from onshore wind farms. Their growth is however limited by the lack of inexpensive land near major population centers and the visual pollution caused by large wind turbines. Wind energy generated from offshore wind farms is the next frontier. Large sea areas with stronger and steadier winds are available for wind farm development and 5MW wind turbine towers located 20 miles from the coastline are invisible. Current offshore wind turbines are supported by monopoles driven into the seafloor at coastal sites a few miles from shore and in water depths of 10–15m. The primary impediment to their growth is visual pollution and the prohibitive cost of seafloor mounted monopoles in larger water depths. This paper presents a fully coupled dynamic analysis of floating wind turbines that enables a parametric design study of floating wind turbine concepts and mooring systems. Pareto optimal designs are presented that possess a favorable combination of nacelle acceleration, mooring system tension and displacement of the floating structure supporting a five megawatt wind turbine. All concepts are selected so that they float stably while in tow to the offshore wind farm site and prior to their connection to the mooring system. A fully coupled dynamic analysis is carried out of the wind turbine, floater and mooring system in wind and a sea state based on standard computer programs used by the offshore and wind industries. The results of the parametric study are designs that show Pareto fronts for mean square acceleration of the turbine versus key cost drivers for the offshore structure that include the weight of the floating structure and the static plus dynamic mooring line tension. Pareto optimal structures are generally either a narrow deep drafted spar, or a shallow drafted barge ballasted with concrete. The mooring systems include both tension leg and catenary mooring systems. In some of the designs, the RMS acceleration of the wind turbine nacelle can be as low as 0.03 g in a sea state with a significant wave height of ten meters and water depths of up to 200 meters. These structures meet design requirements while possessing a favorable combination of nacelle accleration, total mooring system tension and weight of the floating structure. Their economic assessment is also discussed drawing upon a recent financial analysis of a proposed offshore wind farm.

Progressive Drift of Moored Floating Wind Turbines in a Wind Farm: Improved Mooring Capacity Model

2011 ◽  
Author(s):  
Hideyuki Suzuki ◽  
Yu Kitahara ◽  
Yukinari Fukumoto
Keyword(s):  
Wind Turbine ◽  
Safety Factor ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Floating Platform ◽  
Main Research ◽  
Electric Power Supply ◽  
Analysis And Design ◽  
Wide Range

A wide range of platform concepts have been investigated for a floating wind turbine. So far analysis and design of motion characteristics of the platform is main research concern. One key research area less focused is floating platform related risk. If the wind energy would be one of the major sources of electric power supply, wind farms which are comprised of large number of floating wind turbines must be deployed in the ocean. Wind turbines are relatively closely arranged in a wind farm. In such an arrangement, a wind turbine accidentally started drifting will have some possibility to collide with floater and moorings of neighboring moored floating wind turbines, and might initiate another drift which might cause progressive drifting of wind turbines. In the previous report, a scenario of progressive drifting of wind turbines was investigated and associated risk was formulated. Quantitative risk of several arrangements of wind farm was estimated. Effects of arrangement of wind turbines in a wind farm and safety factor used in the design of moorings is discussed. Probability of initial drift was evaluated analyzing past records of accidents and design of mooring. In this research, strength of mooring system was modeled more precisely and probabilistic model was developed considering aged deterioration. Risk of progressive drifting was evaluated and safety factor required to realize a acceptable risk of a wind farm was discussed.

Progressive Drifting of Floating Wind Turbines in a Wind Farm

2009 ◽  
Author(s):  
Hideyuki Suzuki ◽  
Masaru Kurimoto ◽  
Yu Kitahara ◽  
Yukinari Fukumoto
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Wind Farm ◽  
Wind Farms ◽  
Floating Platform ◽  
Allowable Limit ◽  
Main Research ◽  
Analysis And Design ◽  
Floating Wind Turbine ◽  
Wide Range

A wide range of platform types have been investigated for a floating wind turbine. Most of the research projects on a floating wind turbine assume that a land based wind turbine is to be installed on a platform with minimum modification to reduce the overall cost. For this reason, allowable limit of a motion of wind turbine is limited to lower value, for example, five degrees for static inclination and one to two degrees for pitching motion. So far analysis and design of motion characteristics of the platform have been main research concern. One key research area less focused is floating platform related risk. If the wind energy would be one of the major sources of power supply, wind farms which are comprised of large number of floating wind turbines must be deployed in the ocean. Wind turbines will be closely spaced in a wind farm so that installation cost should be minimized. In such an arrangement, a wind turbine accidentally started drifting has some possibility to collide or contact with the moorings of neighboring wind turbines and might cause progressive drifting of wind turbines. This paper present investigation of scenario of progressive drifting of floating wind turbines and evaluate risk of the scenario. Quantitative risk of several arrangements of wind farms is estimated. Effect of arrangement of wind turbines in a wind farm and safety factor used in design moorings is discussed.

Development of wireless bird collision monitoring system using 0-3 piezoelectric composite sensor on wind turbine blades

2017 ◽  
Vol 29 (17) ◽  
pp. 3426-3435
Author(s):  
Sang-Hyeon Kang ◽  
Lae-Hyong Kang
Keyword(s):  
Wind Turbine ◽  
Monitoring System ◽  
Wind Turbines ◽  
Turbine Blades ◽  
Wind Farms ◽  
Clean Energy ◽  
Piezoelectric Composite ◽  
Collision Rate ◽  
Wind Turbine Blades ◽  
The Impact

Over the past several decades, wind turbines have been established as one of the promising renewable energy systems for safe and clean energy collection. In order to collect more energy efficiently, the size of wind turbines has been increased and many wind farms have been constructed. Wind farms generate lots of energy, but they cause several side effects, such as noise and a threat to wildlife. It is reported that the bird collision rate of a wind turbine ranges from 0.01 to 23 annually. It is more serious in the case of rare and endangered birds. In order to monitor the effect on birds in wind farms, researchers have developed remote sensing technology for a detection apparatus using heat and radar. In addition, paint color and other variables have been studied regarding their effects on the collision rate. However, the existing methods are passive ways to prevent bird collision or just monitor bird conditions. Therefore, in this study, we propose a bird collision monitoring system that can detect where the bird collision occurred, which will aid in rescuing the birds. If the wind turbine blade has its own ability to capture an impact signal, the impact location can be easily detected, and the birds can be rescued. For this purpose, piezoelectric paint was applied to the wind turbine blades used in this study. The piezoelectric paint is also known as 0-3 piezoelectric composite, which is composed of piezoelectric particles and polymer resin. It is sensitive to high-frequency signals such as impacts, so it is suitable for monitoring bird collision signals. In order to amplify and transmit the impact signal from the rotating blade to a stationary base, a wireless transmission device using a ZigBee module and signal conditioning circuit was also installed. Through lab-scale tests, it was confirmed that this bird collision monitoring system shows a 100% bird collision detection rate.

scholarly journals Research on the Power Capture and Wake Characteristics of a Wind Turbine Based on a Modified Actuator Line Model

Energies ◽  
2022 ◽  
Vol 15 (1) ◽  
pp. 282
Author(s):  
Feifei Xue ◽  
Heping Duan ◽  
Chang Xu ◽  
Xingxing Han ◽  
Yanqing Shangguan ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Output Power ◽  
Wind Turbines ◽  
Wind Farm ◽  
Three Dimensional ◽  
Wind Farms ◽  
Line Model ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Actuator Line Model

On a wind farm, the wake has an important impact on the performance of the wind turbines. For example, the wake of an upstream wind turbine affects the blade load and output power of the downstream wind turbine. In this paper, a modified actuator line model with blade tips, root loss, and an airfoil three-dimensional delayed stall was revised. This full-scale modified actuator line model with blades, nacelles, and towers, was combined with a Large Eddy Simulation, and then applied and validated based on an analysis of wind turbine wakes in wind farms. The modified actuator line model was verified using an experimental wind turbine. Subsequently, numerical simulations were conducted on two NREL 5 MW wind turbines with different staggered spacing to study the effect of the staggered spacing on the characteristics of wind turbines. The results show that the output power of the upstream turbine stabilized at 5.9 MW, and the output power of the downstream turbine increased. When the staggered spacing is R and 1.5R, both the power and thrust of the downstream turbine are severely reduced. However, the length of the peaks was significantly longer, which resulted in a long-term unstable power output. As the staggered spacing increased, the velocity in the central near wake of the downstream turbine also increased, and the recovery speed at the threshold of the wake slowed down. The modified actuator line model described herein can be used for the numerical simulation of wakes in wind farms.

Sign in / Sign up

Export Citation Format

Share Document