scholarly journals A High-Speed Fault Detection, Identification, and Isolation Method for a Last Mile Radial LVDC Distribution Network

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2901 ◽  
Author(s):  
Saeed Jamali ◽  
Syed Bukhari ◽  
Muhammad Khan ◽  
Khawaja Mehmood ◽  
Muhammad Mehdi ◽  
...  
Keyword(s):  
Fault Detection ◽  
High Speed ◽  
Power Flow ◽  
Detection Method ◽  
Distribution Network ◽  
Test System ◽  
Detection And Identification ◽  
Fault Detection And Identification ◽  
Simulation Results ◽  
Vector Sum

The day-by-day increase in digital loads draws attention towards the need for an efficient and compatible distribution network. An LVDC distribution network has the capability to fulfill such digital load demands. However, the major challenge of an LVDC distribution network is its vulnerability during a fault. The need for a high-speed fault detection method is inevitable before it can be widely adopted. This paper proposes a new fault detection method which extracts the features of the current during a fault. The proposed fault detection method uses the merits of overcurrent, the first and second derivative of current, and signal processing techniques. Three different features are extracted from a time domain current signal through a sliding window. The extracted features are based upon the root squared zero, second, and fourth order moments. The features are then set with individual thresholds to discriminate low-, high-, and very high-resistance faults. Furthermore, a fault is located through the superimposed power flow. Moreover, this study proposes a new method based on the vector sum of positive and negative pole currents to identify the faulty pole. The proposed scheme is verified by using a modified IEEE 13 node distribution network, which is implemented in Matlab/Simulink. The simulation results confirm the effectiveness of the proposed fault detection and identification method. The simulation results also confirm that a fault having a resistance of 1 m Ω is detected and interrupted within 250 μ s for the test system used in this study.

scholarly journals A Novel Method of Fault Detection and Identification in a Tightly Coupled, INS/GNSS-Integrated System

Sensors ◽  
2021 ◽  
Vol 21 (9) ◽  
pp. 2922
Author(s):  
Fan Zhang ◽  
Ye Wang ◽  
Yanbin Gao
Keyword(s):  
Fault Detection ◽  
Parametric Bootstrap ◽  
Integrated System ◽  
Range Data ◽  
Navigation Systems ◽  
Integrated Navigation ◽  
Multiple Faults ◽  
Detection And Identification ◽  
Fault Detection And Identification ◽  
Tightly Coupled

Fault detection and identification are vital for guaranteeing the precision and reliability of tightly coupled inertial navigation system (INS)/global navigation satellite system (GNSS)-integrated navigation systems. A variance shift outlier model (VSOM) was employed to detect faults in the raw pseudo-range data in this paper. The measurements were partially excluded or included in the estimation process depending on the size of the associated shift in the variance. As an objective measure, likelihood ratio and score test statistics were used to determine whether the measurements inflated variance and were deemed to be faulty. The VSOM is appealing because the down-weighting of faulty measurements with the proper weighting factors in the analysis automatically becomes part of the estimation procedure instead of deletion. A parametric bootstrap procedure for significance assessment and multiple testing to identify faults in the VSOM is proposed. The results show that VSOM was validated through field tests, and it works well when single or multiple faults exist in GNSS measurements.

scholarly journals Decomposition of Vibration Signals into Deterministic and Nondeterministic Components and its Capabilities of Fault Detection and Identification

2009 ◽  
Vol 19 (2) ◽  
pp. 327-335 ◽  
Author(s):  
Tomasz Barszcz
Keyword(s):  
Fault Detection ◽  
Adaptive Filter ◽  
Complex Structure ◽  
Reference Signal ◽  
The Self ◽  
Noise Component ◽  
Vibration Signals ◽  
Detection And Identification ◽  
Fault Detection And Identification ◽  
Self Adaptive

Decomposition of Vibration Signals into Deterministic and Nondeterministic Components and its Capabilities of Fault Detection and IdentificationThe paper investigates the possibility of decomposing vibration signals into deterministic and nondeterministic parts, based on the Wold theorem. A short description of the theory of adaptive filters is presented. When an adaptive filter uses the delayed version of the input signal as the reference signal, it is possible to divide the signal into a deterministic (gear and shaft related) part and a nondeterministic (noise and rolling bearings) part. The idea of the self-adaptive filter (in the literature referred to as SANC or ALE) is presented and its most important features are discussed. The flowchart of the Matlab-based SANC algorithm is also presented. In practice, bearing fault signals are in fact nondeterministic components, due to a little jitter in their fundamental period. This phenomenon is illustrated using a simple example. The paper proposes a simulation of a signal containing deterministic and nondeterministic components. The self-adaptive filter is then applied—first to the simulated data. Next, the filter is applied to a real vibration signal from a wind turbine with an outer race fault. The necessity of resampling the real signal is discussed. The signal from an actual source has a more complex structure and contains a significant noise component, which requires additional demodulation of the decomposed signal. For both types of signals the proposed SANC filter shows a very good ability to decompose the signal.

Sign in / Sign up

Export Citation Format

Share Document