scholarly journals Optimization Simulation, Using Steel Plant Off-Gas for Power Generation: A Life-Cycle Cost Analysis Approach

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 2884 ◽  
Author(s):  
Yang-Kon Kim ◽  
Eul-Bum Lee
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Life Cycle Cost ◽  
Power Plants ◽  
Capital Expenditure ◽  
Thermodynamic Simulation ◽  
Cost Savings ◽  
Greenhouse Gas Mitigation ◽  
Potential Cost ◽  
Gas Power Plant

This research aims to contribute to the international desires of greenhouse gas mitigation through a study on the optimization of 100 MW off-gas power plants’ subcritical steam cycle, operating in conjunction with steel plants. The performance and fiscal efficiency of the off-gas power plants are based on data collected from Krakatau Steel plants in Indonesia, simulated and analyzed through thermodynamic simulation model (PEPSE). The three scenarios simulated for comparison are: (1) 100 MW off-gas power plant as-is operation, (2) 100 MW off-gas power plant optimized, and (3) 100 MW cogeneration off-gas power plant. The optimization of the off-gas power plant and use of steam extraction was found to have a 45 M and 26 M USD savings in comparison to the base power plant, assuming a 5.5% discount rate and 400 Million USD capital expenditure. The theoretical findings are of use to academia and industry in providing proof of potential cost-savings of integrating off-gas into existing power generation operations.

scholarly journals Using adsorption chillers for utilising waste heat from power plants

2019 ◽  
Vol 23 (Suppl. 4) ◽  
pp. 1143-1151 ◽  
Author(s):  
Karol Sztekler ◽  
Wojciech Kalawa ◽  
Sebastian Stefanski ◽  
Jaroslaw Krzywanski ◽  
Karolina Grabowska ◽  
...  
Keyword(s):  
Power Generation ◽  
Energy Efficiency ◽  
Power Plant ◽  
Power Plants ◽  
Waste Heat ◽  
Primary Energy ◽  
Simulation Software ◽  
Coefficient Of Performance ◽  
Low Grade ◽  
Adsorption Chiller

At present, energy efficiency is a very important issue and it is power generation facilities, among others, that have to confront this challenge. The simultaneous production of electricity, heat and cooling, the so-called trigeneration, allows for substantial savings in the chemical energy of fuels. More efficient use of the primary energy contained in fuels translates into tangible earnings for power plants while reductions in the amounts of fuel burned, and of non-renewable resources in particular, certainly have a favorable impact on the natural environment. The main aim of the paper was to investigate the contribution of the use of adsorption chillers to improve the energy efficiency of a conventional power plant through the utilization of combined heat and power waste heat, involving the use of adsorption chillers. An adsorption chiller is an item of industrial equipment that is driven by low grade heat and intended to produce chilled water and desalinated water. Nowadays, adsorption chillers exhibit a low coefficient of performance. This type of plant is designed to increase the efficiency of the primary energy use. This objective as well as the conservation of non-renewable energy resources is becoming an increasingly important aspect of the operation of power generation facilities. As part of their project, the authors have modelled the cycle of a conventional heat power plant integrated with an adsorption chiller-based plant. Multi-variant simulation calculations were performed using IPSEpro simulation software.

scholarly journals Effect of Grid Instability on Power Generation System's Reliability

2020 ◽  
pp. 27-37
Author(s):  
Joseph Benedict Bassey ◽  
Isaac F. Odesola
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Failure Rate ◽  
System Reliability ◽  
Power Distribution ◽  
Power Plants ◽  
Time To Failure ◽  
Generation System ◽  
Reliability Indices ◽  
Mean Time

Aims: Reliability assessment of power generation system may be performed with the concept of system adequacy, security or both. Grid being a major component in the power distribution chain is seen to have some influence on the state of the generation system reliability because of the perturbation that may arise from it. In this study, the generation system reliability is evaluated using both the system adequacy and security concept. Study Design: To capture the system security problems attributed to grid disturbance, the generation system is structured into two component systems (1 - generation component and 2 - transmission component) with a series arrangement. Methodology: The reliability indices such as, mean time to failure, mean time to repair, failure rate and repair rate are assessed on component bases and with respect to the entire generation system. Results: The effect of failure rate of the transmission component on the entire generation system failure rate was evaluated as 66.25%, 55.55%, 33.33%, 55.00% and 35.72% in year 2013, 2014, 2017 2018 and 2019 respectively for FIPL Power Plant and 52.94%, 82.35%, 61.38% and 100% effect was evaluated in the year 2016, 2017, 2018 and 2019 respectively for GT5 of Omoku Power Plant. Conclusion: These results showed that there is a significant influence of grid disturbances on the reliability state of the two gas turbine power plants in Nigeria. Measures on possible reliability state improvement of the power generation systems were suggested to include training and retraining of technical personnel on the management of major equipment in the generation and transmission stations. 

Thermo-Economic Assessment Under Electrical Market Uncertainties of a Combined Cycle Gas Turbine Integrated With a Flue Gas-Condensing Heat Pump

2020 ◽  
Author(s):  
Alberto Vannoni ◽  
Andrea Giugno ◽  
Alessandro Sorce
Keyword(s):  
Power Plant ◽  
Power Systems ◽  
Gas Turbine ◽  
Heat Pump ◽  
Flue Gas ◽  
Power Plants ◽  
Greenhouse Gas Emission ◽  
Capital Expenditure ◽  
Combined Cycle ◽  
Gas Turbine Power Plant

Abstract Renewable energy penetration is growing, due to the target of greenhouse-gas-emission reduction, even though fossil fuel-based technologies are still necessary in the current energy market scenario to provide reliable back-up power to stabilize the grid. Nevertheless, currently, an investment in such a kind of power plant might not be profitable enough, since some energy policies have led to a general decrease of both the average price of electricity and its variability; moreover, in several countries negative prices are reached on some sunny or windy days. Within this context, Combined Heat and Power systems appear not just as a fuel-efficient way to fulfill local thermal demand, but also as a sustainable way to maintain installed capacity able to support electricity grid reliability. Innovative solutions to increase both the efficiency and flexibility of those power plants, as well as careful evaluations of the economic context, are essential to ensure the sustainability of the economic investment in a fast-paced changing energy field. This study aims to evaluate the economic viability and environmental impact of an integrated solution of a cogenerative combined cycle gas turbine power plant with a flue gas condensing heat pump. Considering capital expenditure, heat demand, electricity price and its fluctuations during the whole system life, the sustainability of the investment is evaluated taking into account the uncertainties of economic scenarios and benchmarked against the integration of a cogenerative combined cycle gas turbine power plant with a Heat-Only Boiler.

300 MW Combined-Cycle Plant With Integrated Coal Gasification

1984 ◽  
Author(s):  
Rolf H. Kehlhofer
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Gas Turbines ◽  
Power Plants ◽  
Coal Gasification ◽  
District Heating ◽  
Combined Cycle ◽  
Liquid Fuels ◽  
Combined Cycle Plant ◽  
The Individual

In the past 15 years the combined-cycle (gas/steam turbine) power plant has come into its own in the power generation market. Today, approximately 30 000 MW of power are already installed or being built as combined-cycle units. Combined-cycle plants are therefore a proven technology, showing not only impressive thermal efficiency ratings of up to 50 percent in theory, but also proving them in practice and everyday operation (1) (2). Combined-cycle installations can be used for many purposes. They range from power plants for power generation only, to cogeneration plants for district heating or combined cycles with maximum additional firing (3). The main obstacle to further expansion of the combined cycle principle is its lack of fuel flexibility. To this day, gas turbines are still limited to gaseous or liquid fuels. This paper shows a viable way to add a cheap solid fuel, coal, to the list. The plant system in question is a 2 × 150 MW combined-cycle plant of BBC Brown Boveri with integrated coal gasification plant of British Gas/Lurgi. The main point of interest is that all the individual components of the power plant described in this paper have proven their worth commercially. It is therefore not a pilot plant but a viable commercial proposition.

Allocative efficiency, potential cost savings, and power supply price markdown in Korean electric power sector

2018 ◽  
Vol 30 (4) ◽  
pp. 617-628 ◽  
Author(s):  
Myunghun Lee
Keyword(s):  
Electric Power ◽  
Power Supply ◽  
Power Plants ◽  
Allocative Efficiency ◽  
Cost Savings ◽  
Electric Power Industry ◽  
Production Costs ◽  
Potential Cost ◽  
Owned Company ◽  
Supply Price

As one publicly owned company monopolizes the electricity supply, Korea’s power market has been distorted. Firms faced with constraints imposed by a regulatory environment are likely to fail to minimize their production costs subject to market prices. In this paper, we test for allocative efficiency of fuel inputs for the Korean electric power industry over the period of 1990–2015. The potential cost savings and maximum power supply price markdown are calculated by imposing allocative efficiency. The power plants, on average, could have reduced their fuel costs by as much as 22.1% annually. The attainment of allocative efficiency would have enabled the power supply price to be cut by 7.6% annually.

scholarly journals Application of Unit Commitment with Market Pool in a Peaking Power Generation Firm in the Philippines for a Cost Reduction Case Study

2016 ◽  
Vol 2016 ◽  
pp. 1-10
Author(s):  
Luke Rey Santillan ◽  
Kenn Brylle Senen ◽  
Robert Wamilda ◽  
Lanndon Ocampo ◽  
Rafael Seva ◽  
...  
Keyword(s):  
Power Generation ◽  
Developing Countries ◽  
Unit Commitment ◽  
Cost Savings ◽  
The Philippines ◽  
Mixed Integer ◽  
Potential Cost ◽  
Small Power ◽  
Generation Costs

This paper attempts to provide an optimum loading schedule of power generating units with the least cost by solving a unit commitment (UC) problem and to present good estimates of cost differences when UC problem is not applied. UC is a fundamental optimization problem of power generation systems which determines the optimum schedule of generating units which minimizes generation costs. However, for small power generation firms which are situated in developing countries, UC-based problems are poorly understood if not implemented and the scheduling of generating units is based on some methodologies which may provide results that are not optimal. Thus, a case study in a small power generation firm in central Philippines is carried out to elucidate these objectives. The case requires a solution of the mixed-integer nonlinear programming (MINLP) problem. Results show that the proposed UC-based problem yields optimal costs and the cost disparity from the current scheduling scheme is approximately at 27% which may be considered as potential cost savings. This shows that UC-based problem provides a reliable platform in achieving minimal generation costs. These results are significant to decision-makers particularly in small power generation firms and to engineering practitioners in the Philippines and in some developing countries as these provide an overview of the disparity of cost figures of not implementing UC.

scholarly journals Studi Microgrid System Menuju Pembangunan Desa Mandiri Energi Di Desa Temajuk Kabupaten Sambas

ELKHA ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 6
Author(s):  
Yunando Yunando ◽  
Sutriyatna Sutriyatna
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Cost Savings ◽  
Electrical Energy ◽  
Fuel Oil ◽  
System Study ◽  
Hydro Power ◽  
West Kalimantan ◽  
Different Types ◽  
The Village

Abstract– Temajuk Village is one of the villages in Kecamatan Paloh Sambas regency, West Kalimantan Province, which borders directly with Sarawak (Malaysia). From 1980 to 2011 Desa Temajuk has no permanent electricity yet. In 2011, the village will have electrical energy by utilizing local energy such as Micro Hydro Power Generation, by 2012, Centralized Solar Power Generation and by 2015 Diesel Power Plant, all of which will carry each load without being integrated with the same network . So it is necessary to do the study of merging a network that is connected to one another to be able to bear the same load.Microgrid System study was then created with the aim of producing a sustainable distribution network study by combining 3 different types of plants and operational savings from the use of diesel fuel oil costs as the main power plant after the network system. Keywords- Microgrid System, cost savings

scholarly journals Assessment on Energy Conversion Efficiency and GHG Emissions Rate for Coal, Natural Gas and Biomass Power Plant in Malaysia

2021 ◽  
Vol 87 (2) ◽  
pp. 145-153
Author(s):  
Radin Diana R. Ahmad ◽  
Tiong Sieh Kiong ◽  
Sazalina Zakaria ◽  
Ahmad Rosly Abbas ◽  
Chen Chai Phing ◽  
...  
Keyword(s):  
Power Plant ◽  
Natural Gas ◽  
Energy Conversion ◽  
Conversion Efficiency ◽  
Power Plants ◽  
Emission Rate ◽  
Energy Conversion Efficiency ◽  
Combined Cycle ◽  
Gas Power Plant ◽  
Biomass Power Plant

Three different power plants have been assessed in terms of energy conversion efficiency and GHGs emission rate. The power plants are coal power plant, natural gas power plant and biomass power plant. The assessments are made by collecting fuels consumption data and generated electricity data of each power plant. In addition to the data collection, observation on operational practices have also been carried out. The energy conversion efficiency and the GHGs emission rate for all power plants are recorded to be lower than the typical values proposed by the literature. The biomass power plant recorded the lowest energy conversion efficiency at 6.47 %. Meanwhile, the natural gas power plant utilizing the combined cycle gas turbine technology recorded the highest overall energy conversion efficiency at 48.35 % and rated to emit GHGs at 0.32 kg CO2e per kWh.

scholarly journals FORMATION OF THE INFORMATIONAL SUPPORTING FOR MANAGEMENT OF POWER GENERATION AND DELIVERY ON THE COGENERATION POWER PLANT IN THE LIBERALIZED ELECTRICITY MARKET

2021 ◽  
Vol 2021 (2) ◽  
pp. 67-76
Author(s):  
O. Kotsar ◽  
◽  
I. Rasko ◽  
◽  
◽  
...  
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Energy Management ◽  
Power Supply ◽  
Electricity Market ◽  
Power Plants ◽  
Automated System ◽  
Demand Side ◽  
Informational Support ◽  
Successful Solution

The liberalization of the electricity market aims at the most complete repletion of consumer needs for electricity and quality power supply, which requires the adaptive management of an energy using both by demand side and by the electricity producers – power plants. The successful solution of this task provides, in particular, for using the effective methods and reliable means for the formation of the informational support for the tasks of managing the power generation and delivery on the power plants in order to ensure conforming in real time the market power bids to current demand side asks. The article proposes a methodology, describes the implemented tools and analyzes the experience of managing the power generation and delivery on the cogeneration power plant based on the information which formed by the automated system for control, metering and energy management in the conditions of functioning of the liberalized electricity market of Ukraine. References 10, figures 5.

CO2 Capture for Power Plants: An Analysis of the Energetic Requirements by Chemical Absorption

2006 ◽  
Author(s):  
Ana R. Diaz
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Co2 Capture ◽  
Power Plants ◽  
Fossil Fuel ◽  
Plant Performance ◽  
Energy Requirements ◽  
Co2 Absorption ◽  
Chemical Absorption ◽  
Technical Effort

The tendency in the world energy demand seems clear: it can only grow. The energetic industry will satisfy this demand-despite all its dialectic about new technologies-at least medium term mostly with current fossil fuel technologies. In this picture from an engineer’s point of view, one of the primary criterions for mitigating the effects of increasing atmospheric concentration of CO2 is to restrict the CO2 fossil fuel emissions into the atmosphere. This paper is focused on the analysis of different CO2 capture technologies for power plants. Indeed, one of the most important goal to concentrate on is the CO2 capture energy requirements, as it dictates the net size of the power plant and, hence, the net cost of power generation with CO2 avoidance technologies. Here, the Author presents a critical review of different CO2 absorption capture technologies. These technologies have been widely analyzed in the literature under chemical and economic points of view, leaving their impact on the energy power plant performance in a second plan. Thus, the central question examined in this paper is the connection between abatement capability and its energetic requirements, which seriously decrease power generation efficiency. Evidencing that the CO2 capture needs additional technical effort and establishing that further developments in this area must be constrained by reducing its energy requirements. After a comprehensive literature revision, six different chemical absorption methods are analyzed based on a simplified energetic model, in order to account for its energetic costs. Furthermore, an application case study is provided where the different CO2 capture systems studied are coupled to a natural gas cogeneration power plant.

Sign in / Sign up

Export Citation Format

Share Document