scholarly journals Variable Reactivity Control in Small Modular High Temperature Reactors Using Moderation Manipulation Techniques

Energies ◽  
2018 ◽  
Vol 11 (7) ◽  
pp. 1897 ◽  
Author(s):  
Seddon Atkinson ◽  
Dzianis Litskevich ◽  
Bruno Merk
Keyword(s):  
High Temperature ◽  
Power Distribution ◽  
Nuclear Power ◽  
Power Plants ◽  
Large Scale ◽  
Fuel Cycle ◽  
High Reactivity ◽  
Fissile Material ◽  
The Core ◽  
Flux Spectrum

With extensive research being undertaken into small modular reactor design concepts, this has brought new challenges to the industry. One key challenge is to be able to compete with large scale nuclear power plants economically. In this article, a novel approach is applied to reduce the overall dependence on fixed burnable poisons during high reactivity periods within a high temperature graphite moderated reactor. To reduce the excess activity, we aim to harden the flux spectrum across the core by removing part of the central moderation column, thus breeding more plutonium, in a later period the flux spectrum is softened again to utilise this plutonium again. This provides a neutron storage effect within the 238U and the resulting breeding of Plutonium. Due to the small size and the annular design of the high temperature reactor, the central reflector is key to the thermalization process. By removing a large proportion of the central reflector, the fuel within the proximity of the central reflector are less likely to receive neutrons within the thermal energy range. In addition to this, the fuel at the extremities of the core have a higher chance of fission due to the higher number of neutrons reaching them. This works as a method of balancing the power distribution between the central and outside fuel pins. During points of low reactivity, such as the end of the fuel cycle, the central reflector can be reinserted and the additionally bred plutonium and U235 at the centre of the core will encounter a higher probability of fission due to more thermal neutrons within this region. By removing the central reflector, this provided a 320 pcm reactivity drop for the duration of the fuel cycle. The plutonium buildup provided additional fissile material up until the central reflector was reinserted. The described method created a two-fold benefit. The overall full power days within the core was increased by ~31 days due to the additional fissile material within the core and secondly the highest loaded power pins saw a 30% power reduction during the removal of the central reflector column.

Lessons Learned From the Operation of Large-Scale Reprocessing-Recycling Facilities in France: What Is in It for China?

2017 ◽  
Author(s):  
Jean-Pierre Gros
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Large Scale ◽  
Central Government ◽  
Fuel Cycle ◽  
Public Information ◽  
Lessons Learned ◽  
Mitigation Measures ◽  
Spent Fuel ◽  
The Impact

AREVA has been running since decades nuclear reprocessing and recycling installations in France. Several industrial facilities have been built and used to this aim across the time. Following those decades and with the more and more precise monitoring of the impact of those installations, precise data and lessons-learned have been collected that can be used for the stakeholders of potential new facilities. China has expressed strong interest in building such facilities. As a matter of fact, the issue of accumulation of spent fuel is becoming serious in China and jeopardizes the operation of several nuclear power plants, through the running out of space of storage pools. Tomorrow, with the extremely high pace of nuclear development of China, accumulation of spent fuel will be unbearable. Building reprocessing and recycling installations takes time. A decision has to be taken so as to enable the responsible development of nuclear in China. Without a solution for the back end of its nuclear fuel cycle, the development of nuclear energy will face a wall. This is what the Chinese central government, through the action of its industrial CNNC, has well understood. Several years of negotiations have been held with AREVA. Everybody in the sector seems now convinced. However, now that the negotiation is coming to an end, an effort should be done towards all the stakeholders, sharing actual information from France’s reference facilities on: safety, security, mitigation measures for health protection (of the workers, of the public), mitigation measures for the protection of the environment. Most of this information is public, as France has since years promulgated a law on Nuclear transparency. China is also in need for more transparency, yet lacks means to access this public information, often in French language, so let’s open our books!

A Nodal Dynamic Model for Control System Simulation of the HTR-PM Reactor Core

2010 ◽  
Author(s):  
Zhe Dong ◽  
Xiaojin Huang ◽  
Liangju Zhang
Keyword(s):  
Control System ◽  
High Temperature ◽  
Power Distribution ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Reactor ◽  
Reactor Core ◽  
Pebble Bed ◽  
Nodal Model ◽  
High Temperature Gas

The modular high-temperature gas-cooled nuclear reactor (MHTGR) is seen as one of the best candidates for the next generation of nuclear power plants. China began to research the MHTGR technology at the end of the 1970s, and a 10 MWth pebble-bed high temperature reactor HTR-10 has been built. On the basis of the design and operation of the HTR-10, the high temperature gas-cooled reactor pebble-bed module (HTR-PM) project is proposed. One of the main differences between the HTR-PM and HTR-10 is that the ratio of height to diameter corresponding to the core of the HTR-PM is much larger than that of the HTR-10. Therefore it is not proper to use the point kinetics based model for control system design and verification. Motivated by this, a nodal neutron kinetics model for the HTR-PM is derived, and the corresponding nodal thermal-hydraulic model is also established. This newly developed nodal model can reflect not only the total or average information but also the distribution information such as the power distribution as well. Numerical simulation results show that the static precision of the new core model is satisfactory, and the trend of the transient responses is consistent with physical rules.

Thorium MSR as a Small-Scale Energy Source: Opportunities for Japan

2011 ◽  
Author(s):  
Takashi Kamei
Keyword(s):  
Power Plant ◽  
Nuclear Power Plant ◽  
Nuclear Fuel ◽  
Nuclear Power ◽  
Power Plants ◽  
Large Scale ◽  
Spent Nuclear Fuel ◽  
Small Scale ◽  
Fissile Material ◽  
Implementation Capacity

Even after the huge impact of Fukushima Daiichi nuclear power plant accident, Japan has to establish its energy supply system satisfying requirements of both global warming and resistibility of natural disaster. Nuclear power has a potential to reduce carbon emission but large-scale and centralized nuclear power plant may lose large volume of electricity supply at once. Small-scale nuclear power plants will bring solution in Japan. Thorium molten-salt reactor (MSR) is selected to simulate implementation capacity of small reactors in Japan. In order to use thorium as nuclear fuel, fissionable isotope is indispensable since natural thorium does not include fissile material. Japan owns plutonium in spent nuclear fuel of uranium usage. Quantitative evaluation of implementing capacity of thorium MSR in Japan by using plutonium accumulated in Japan. Implementation capacity of thorium MSR will be about 38 GWe and 11.2 GWe in the maximum and minimum cases at 2050, respectively.

scholarly journals Determination of 18-month fuel cycle parameters for the purpose of fuel costs minimization at the basis of use constructions of fuel assemblies in VVER-1200 reactors

2019 ◽  
Vol 5 (1) ◽  
pp. 9-15
Author(s):  
Taha M. Hashlamoun ◽  
Sergey B. Vygovsky ◽  
Sergey T. Leskin ◽  
A. Safa Duman
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Fuel Cycle ◽  
Life Time ◽  
Reactor Vessel ◽  
Reactor Fuel ◽  
The Core ◽  
Fuel Assemblies ◽  
Fuel Costs

This article presents the results of research, that were focused on determining the optimal parameters of the extension of (reactor life-time) reactor fuel cycle in order to reduce the total operating costs of nuclear power plants during the transition from 12-month reactor fuel cycle to 18-month fuel cycle. The relevance of the research is related to the fact that, in recent years, there is a transition at all operating nuclear power plants VVER-1000 (1200) from 12-month reactor fuel cycle to extended 18-month fuel cycle. At the same time, represent the interests to solve the problem of conservation the extension of reactor life-time while reducing the number of loaded fuel assemblies with fresh fuel assemblies, which would reduce the total operating, and fuel costs. Search for solutions of this problem is associated with mandatory implementation of all requirements for the safe operation of the reactor and the reduction of the maximum fast neutron fluence on the reactor vessel in comparison with its value at the operating nuclear power plants. In the present work, with using the program PROSTOR software complex researched the neutron-physical characteristics of the core at the nominal parameters of the VVER-1200 reactor through the implementation of various fuel cycle strategies. The article developed various schemes of fuel-reloading for an 18-month fuel cycle with a different number of fuel assemblies. The article carries out a comparative analysis of the main parameters in the core for fuel-reloading schemes options of an 18- and 12-month fuel cycle with each other. Determine the minimum amount of fuel assemblies and provide the necessary duration of the reactor life-time for 18-month fuel cycle with using the extension of reactor life-time by reducing the power at the end of the reactor cycle to 70% of the nominal power. In the article, the arrangements of fuel assemblies were developed to provide limitations of local power by volume of the core, which reduce the fluence of fast neutrons on the reactor vessel in comparison with the projected value of the fluence. This article shows that the 18-month fuel cycle for the VVER-1200 reactor is more economical than the 12-month fuel cycle. These studies were carried out for the VVER-1200 reactor at the power of 100% of the nominal.

scholarly journals On the Root Causes of the Fukushima Daiichi Disaster from the Perspective of High Complexity and Tight Coupling in Large-Scale Systems

Symmetry ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 414
Author(s):  
Atsuo Murata ◽  
Waldemar Karwowski
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Large Scale ◽  
High Complexity ◽  
Tight Coupling ◽  
Large Scale Systems ◽  
Safety Issues ◽  
Loss Of Coolant ◽  
Station Blackout ◽  
Fukushima Daiichi

This study explores the root causes of the Fukushima Daiichi disaster and discusses how the complexity and tight coupling in large-scale systems should be reduced under emergencies such as station blackout (SBO) to prevent future disasters. First, on the basis of a summary of the published literature on the Fukushima Daiichi disaster, we found that the direct causes (i.e., malfunctions and problems) included overlooking the loss of coolant and the nuclear reactor’s failure to cool down. Second, we verified that two characteristics proposed in “normal accident” theory—high complexity and tight coupling—underlay each of the direct causes. These two characteristics were found to have made emergency management more challenging. We discuss how such disasters in large-scale systems with high complexity and tight coupling could be prevented through an organizational and managerial approach that can remove asymmetry of authority and information and foster a climate of openly discussing critical safety issues in nuclear power plants.

Development of 1500-r/min 75-Inch Ultra-Long Last Stage Blades for Nuclear Steam Turbine

2017 ◽  
Author(s):  
Deqi Yu ◽  
Jiandao Yang ◽  
Wei Lu ◽  
Daiwei Zhou ◽  
Kai Cheng ◽  
...  
Keyword(s):  
Nuclear Power ◽  
Power Plants ◽  
Large Scale ◽  
Vibration Monitoring ◽  
Steam Turbines ◽  
Element Analysis ◽  
Rotating Blade ◽  
Lifetime Analysis ◽  
Computational Fluid Dynamics Cfd ◽  
Last Stage

The 1500-r/min 1905mm (75inch) ultra-long last three stage blades for half-speed large-scale nuclear steam turbines of 3rd generation nuclear power plants have been developed with the application of new design features and Computer-Aided-Engineering (CAE) technologies. The last stage rotating blade was designed with an integral shroud, snubber and fir-tree root. During operation, the adjacent blades are continuously coupled by the centrifugal force. It is designed that the adjacent shrouds and snubbers of each blade can provide additional structural damping to minimize the dynamic stress of the blade. In order to meet the blade development requirements, the quasi-3D aerodynamic method was used to obtain the preliminary flow path design for the last three stages in LP (Low-pressure) casing and the airfoil of last stage rotating blade was optimized as well to minimize its centrifugal stress. The latest CAE technologies and approaches of Computational Fluid Dynamics (CFD), Finite Element Analysis (FEA) and Fatigue Lifetime Analysis (FLA) were applied to analyze and optimize the aerodynamic performance and reliability behavior of the blade structure. The blade was well tuned to avoid any possible excitation and resonant vibration. The blades and test rotor have been manufactured and the rotating vibration test with the vibration monitoring had been carried out in the verification tests.

scholarly journals Benefits, Drawbacks, and Future Trends of Brayton Helium Gas Turbine Cycles for Gas-Cooled Fast Reactor and Very-High Temperature Reactor Generation IV Nuclear Power Plants

2020 ◽  
Vol 7 (1) ◽  
Author(s):  
Arnold Gad-Briggs ◽  
Emmanuel Osigwe ◽  
Pericles Pilidis ◽  
Theoklis Nikolaidis ◽  
Suresh Sampath ◽  
...  
Keyword(s):  
High Temperature ◽  
Gas Turbine ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Power Plants ◽  
Optimum Operating ◽  
Future Trends ◽  
Design Point ◽  
Gen Iv ◽  
Very High

Abstract Numerous studies are on-going on to understand the performance of generation IV (Gen IV) nuclear power plants (NPPs). The objective is to determine optimum operating conditions for efficiency and economic reasons in line with the goals of Gen IV. For Gen IV concepts such as the gas-cooled fast reactors (GFRs) and very-high temperature reactors (VHTRs), the choice of cycle configuration is influenced by component choices, the component configuration and the choice of coolant. The purpose of this paper to present and review current cycles being considered—the simple cycle recuperated (SCR) and the intercooled cycle recuperated (ICR). For both cycles, helium is considered as the coolant in a closed Brayton gas turbine configuration. Comparisons are made for design point (DP) and off-design point (ODP) analyses to emphasize the pros and cons of each cycle. This paper also discusses potential future trends, include higher reactor core outlet temperatures (COT) in excess of 1000 °C and the simplified cycle configurations.

scholarly journals Study on Probabilistic Safety Goals for Multimodule High-Temperature Gas-Cooled Reactor Based on Chinese Societal Risks

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Jinghan Zhang ◽  
Jun Zhao ◽  
Jiejuan Tong
Keyword(s):  
High Temperature ◽  
Nuclear Power ◽  
Power Plants ◽  
Nuclear Regulatory Commission ◽  
Nuclear Safety ◽  
Energy Agency ◽  
Water Reactor ◽  
Regulatory Commission ◽  
High Temperature Gas ◽  
Probabilistic Safety

Nuclear safety goal is the basic standard for limiting the operational risks of nuclear power plants. The statistics of societal risks are the basis for nuclear safety goals. Core damage frequency (CDF) and large early release frequency (LERF) are typical probabilistic safety goals that are used in the regulation of water-cooled reactors currently. In fact, Chinese current probabilistic safety goals refer to the Nuclear Regulatory Commission (NRC) and the International Atomic Energy Agency (IAEA), and they are not based on Chinese societal risks. And the CDF and LERF proposed for water reactor are not suitable for high-temperature gas-cooled reactors (HTGR), because the design of HTGR is very different from that of water reactor. And current nuclear safety goals are established for single reactor rather than unit or site. Therefore, in this paper, the development of the safety goal of NRC was investigated firstly; then, the societal risks in China were investigated in order to establish the correlation between the probabilistic safety goal of multimodule HTGR and Chinese societal risks. In the end, some other matters about multireactor site were discussed in detail.

Sign in / Sign up

Export Citation Format

Share Document