scholarly journals Analysis of Combustion Process in Industrial Gas Engine with Prechamber-Based Ignition System

Energies ◽  
2018 ◽  
Vol 11 (2) ◽  
pp. 336 ◽  
Author(s):  
Rafał Ślefarski ◽  
Michał Gołębiewski ◽  
Paweł Czyżewski ◽  
Przemysław Grzymisławski ◽  
Jacek Wawrzyniak
Keyword(s):  
Combustion Process ◽  
Ignition System ◽  
Gas Engine

Ignition System Designed to Extend the Plug Life, and the Lean Limit in a Natural Gas Engine

2003 ◽  
Author(s):  
A. K. Chan ◽  
S. H. Waters
Keyword(s):  
Natural Gas ◽  
Engine Performance ◽  
Ignition System ◽  
Gas Engine ◽  
Natural Gas Engine ◽  
Dc System ◽  
Spark Plug ◽  
Long Duration ◽  
Discharge Duration ◽  
Lean Limit

An ignition system that is based on the alternating (AC) rather than the traditional direct (DC) current in the spark plug discharge has been developed at the Caterpillar Technical Center. This system can generate a long duration discharge with controllable power. It is believed that such an ignition system can provide both a leaner operating limit and a longer spark plug life than a traditional DC system due to the long discharge duration and the low discharge power. The AC ignition system has successfully been tested on a Caterpillar single cylinder G3500 natural gas engine to determine the effects on the engine performance, combustion characteristics and emissions. The test results indicate that while the AC ignition system has only a small impact on engine performance (with respect to a traditional DC system), it does extend the lean limit with lower NOx emissions. Evidences also show the potential of reduce spark plug electrode erosions from the low breakdown and sustaining discharge powers from the AC ignition system. This paper summarizes the prototype design and engine demonstration results of the AC ignition system.

scholarly journals Thermodynamic cycles variability of TJI gas engine with different mixture preparation systems

2020 ◽  
Vol 181 (2) ◽  
pp. 46-52
Author(s):  
Filip SZWAJCA ◽  
Krzysztof WISŁOCKI
Keyword(s):  
Fuel Injection ◽  
Combustion Process ◽  
Engine Operation ◽  
Gas Engine ◽  
Part Load ◽  
Mixture Preparation ◽  
Key Factor ◽  
Test Engine ◽  
Operation Stability ◽  
The Impact

Gas engines are a viable source of propulsion due to the ecological indicators of gas fuels and the large amount of the needed natural resources. Combustion of lean homogeneous gas mixtures allows achieving higher thermal efficiency values, which is a key factor in current engine development trends. Using the spark-jet ignition system (also called as Turbulent Jet Ignition or Two-stage combustion) significantly improves the efficiency and stability of the combustion process, especially in the part-load operation on lean or very lean mixtures. This paper presents the impact of using two different fuel injection methods: Port Fuel Injection or Mixer on the operation stability of a gas engine designed for LDVs. Comparative studies of two different mixture preparation systems were carried out on a single-cylinder AVL 5804 test engine. By re-cording the cylinder pressure for a significant number of engine cycles, it became possible to determine the repeatability of engine operation and to correlate the results with the mixture formation system and the air-fuel ratio. In the performed research the beneficial effect of the mixer system application on the engine operation stability in the part-load conditions was found.

Railplug Design Optimization to Improve Large-Bore Natural Gas Engine Performance

2005 ◽  
Author(s):  
Hongxun Gao ◽  
Matt J. Hall ◽  
Ofodike A. Ezekoye ◽  
Ron D. Matthews
Keyword(s):  
Natural Gas ◽  
High Energy ◽  
Parameter Study ◽  
Transfer Model ◽  
High Speed Photography ◽  
Discharge Process ◽  
Ignition System ◽  
Gas Engine ◽  
Natural Gas Engines ◽  
Natural Gas Engine

It is a very challenging problem to reliably ignite extremely lean mixtures, especially for the low speed, high load conditions of stationary large-bore natural gas engines. If these engines are to be used for the distributed power generation market, it will require operation with higher boost pressures and even leaner mixtures. Both place greater demands on the ignition system. The railplug is a very promising ignition system for lean burn natural gas engines with its high-energy deposition and high velocity plasma jet. High-speed photography was used to study the discharge process. A heat transfer model is proposed to aid the railplug design. A parameter study was performed both in a constant volume bomb and in an operating natural gas engine to improve and optimize the railplug designs. The engine test results show that the newly designed railplugs can ensure the ignition of very lean natural gas mixtures and extend the lean stability limit significantly. The new railplug designs also improve durability.

Development of an Open Path Laser Ignition System for a Large Bore Natural Gas Engine: Part 1 — System Design

2005 ◽  
Author(s):  
David L. Ahrens ◽  
Azer P. Yalin ◽  
Daniel B. Olsen ◽  
Gi-Heon Kim
Keyword(s):  
Natural Gas ◽  
Pollutant Emissions ◽  
Electrode Erosion ◽  
Laser Ignition ◽  
Ignition System ◽  
Gas Engine ◽  
Natural Gas Engine ◽  
Spark Plug ◽  
Engine Part ◽  
Beam Delivery

Using a laser, as opposed to a conventional (electrical) spark plug, to create a combustion initiating spark is potentially advantageous for several reasons: flexibility in choosing and optimizing the spark location, in particular to move the spark away from solid heat sinks; production of a more robust spark containing more energy; and obviation of electrode erosion problems. These advantages may lead to an extension of the lean limit, an increase in engine thermal efficiency, and the concomitant benefits of reduced pollutant emissions. This paper presents the design of a laser ignition system appropriate for a large bore natural gas engine. Design considerations include: optimization of spark location, design of beam delivery system and optical plug, and mitigation of vibration and thermal effects. Engine test results will be presented in the second paper of this two-paper series.

Analysis of chaos in the combustion process of premixed natural gas engine

2017 ◽  
Vol 121 ◽  
pp. 768-778 ◽  
Author(s):  
Shun-Liang Ding ◽  
En-Zhe Song ◽  
Li-Ping Yang ◽  
Grzegorz Litak ◽  
Yu-Yuan Wang ◽  
...  
Keyword(s):  
Natural Gas ◽  
Combustion Process ◽  
Gas Engine ◽  
Natural Gas Engine

The scavenging timing of pre-chamber on the performance of a natural gas engine

2020 ◽  
pp. 146808742096087
Author(s):  
Xue Yang ◽  
Yong Cheng ◽  
Pengcheng Wang
Keyword(s):  
Natural Gas ◽  
Combustion Process ◽  
Injection System ◽  
Maximum Pressure ◽  
Ignition Process ◽  
Main Chamber ◽  
Ignition Timing ◽  
Gas Engine ◽  
Natural Gas Engines ◽  
Natural Gas Engine

The pre-chamber ignition system scavenged with natural gas can effectively improve the in-cylinder combustion process and extend the lean-burn limit of natural gas engines. The scavenging process affects the flow field and fuel-air mixture concentration distribution in the pre-chamber and affects the combustion process in the pre-chamber as well as the ignition process in the main chamber. This has a significant influence on the performance of natural gas engines. It is supposed that the ratio of natural gas remaining in the mixture inside the pre-chamber at the ignition timing affects the combustion process in the pre-chamber. To verify this suppose, an independent injection system for injecting natural gas into the pre-chamber is designed and experiments are carried out on a single-cylinder natural gas engine. The ratio of natural gas remaining in the mixture inside the pre-chamber at the ignition timing is adjusted by changing the injection start angle of the scavenging process. The combustion process in the pre-chamber and the main chamber are analyzed using the in-cylinder pressures. The results indicate that, with the delay of the injection start angle, the ratio of natural gas remaining in the mixture inside the pre-chamber at the ignition timing increases, the combustion process in the pre-chamber is enhanced, the maximum pressure difference between two chambers increases and appears earlier. The energy of the hot jets and the penetration of the jets increase, which enhances the combustion process in the main chamber.

Laser Ignition of Natural Gas Engines Using Fiber Delivery

2005 ◽  
Author(s):  
Azer P. Yalin ◽  
Morgan W. Defoort ◽  
Sachin Joshi ◽  
Daniel Olsen ◽  
Bryan Willson ◽  
...  
Keyword(s):  
Natural Gas ◽  
Past Research ◽  
Spark Ignition ◽  
Laser Source ◽  
Laser Ignition ◽  
Ignition System ◽  
Gas Engine ◽  
Natural Gas Engines ◽  
Natural Gas Engine ◽  
Design Concepts

A practical impediment to implementation of laser ignition systems has been the open-path beam delivery used in past research. In this contribution, we present the development and implementation of a fiber-optically delivery laser spark ignition system. To our knowledge, the work represents the first demonstration of fiber coupled laser ignition (using a remote laser source) of a natural gas engine. A Nd:YAG laser is used as the energy source and a coated hollow fiber is used for beam energy delivery. The system was implemented on a single-cylinder of a Waukesha VGF 18 turbo charged natural gas engine and yielded consistent and reliable ignition. In addition to presenting the design and testing of the fiber delivered laser ignition system, we present initial design concepts for a multiplexer to ignite multiple cylinders using a single laser source, and integrated optical diagnostic approaches to monitor the spark ignition and combustion performance.

Visualization of combustion process for establishing the ignition system for lean burn

1995 ◽  
Author(s):  
Sang-Joon Lee ◽  
Sungoh Ra ◽  
Youngsik Song ◽  
Jongtai Lee
Keyword(s):  
Combustion Process ◽  
Lean Burn ◽  
Ignition System
Sign in / Sign up

Export Citation Format

Share Document