scholarly journals Emission Characteristics for a Homogeneous Charged Compression Ignition Diesel Engine with Exhaust Gas Recirculation Using Split Injection Methodology

Energies ◽  
2017 ◽  
Vol 10 (12) ◽  
pp. 2146 ◽  
Author(s):  
Changhee Lee ◽  
Jaewoo Chung ◽  
Kihyung Lee
Keyword(s):  
Diesel Engine ◽  
Exhaust Gas Recirculation ◽  
Emission Characteristics ◽  
Exhaust Gas ◽  
Compression Ignition ◽  
Split Injection ◽  
Gas Recirculation

scholarly journals Emission Characteristics under Diesel and Biodiesel Fueled Compression Ignition Engine with Various Injector Holes and EGR Conditions

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2973
Author(s):  
Taejung Kim ◽  
Jungsoo Park ◽  
Honghyun Cho
Keyword(s):  
Diesel Engine ◽  
Environmental Pollutants ◽  
Exhaust Gas Recirculation ◽  
Emission Characteristics ◽  
Exhaust Gas ◽  
Compression Ignition ◽  
Fuel Type ◽  
Compression Ignition Engine ◽  
Conventional Rail ◽  
Gas Recirculation

The combustion performance of a conventional rail diesel engine was investigated by measuring the exhaust gas with the respect to the number of injector holes, fuel type, and the use of exhaust gas recirculation (EGR), to provide a detailed reduction of environmental pollutants. It was found that a six- or seven-hole injector was more effective than a five-hole injector for reducing the exhaust gas. In addition, the mixing of 20% biodiesel oil with diesel most effectively reduced the HC and NOx contents. The technology generally reduced the NOx and CO contents of the exhaust, but had no significant effect on the HC and CO2 contents.

The Use of a Multizone Model for Prediction of Soot and NOx Emission in a D.I. Diesel Engine as a Function of Intake Air O2 Content

2000 ◽  
Author(s):  
Zhiming Gao ◽  
Will Schreiber
Keyword(s):  
Diesel Engine ◽  
Direct Injection ◽  
Gas Injection ◽  
Exhaust Gas Recirculation ◽  
Exhaust Gas ◽  
Compression Ignition ◽  
Split Injection ◽  
Analytical Work ◽  
Multizone Model ◽  
Gas Recirculation

Abstract A phenomenological model based on the use of multiple zones is described and compared with other experimental and analytical work. This multizone model is used to examine the effect on emissions of increasing the oxygen concentration in the intake air of a compression-ignition, direct-injection engine. It is concluded that O2-enriched air could only be useful if combined with other modifications such as auxiliary gas injection, split injection, and exhaust gas recirculation.

Technical Note: Investigation on emission characteristics of a compression ignition engine with oxygenated fuels and exhaust gas recirculation

2000 ◽  
Vol 214 (5) ◽  
pp. 503-508 ◽  
Author(s):  
H. W. Wang ◽  
Z. H. Huang ◽  
L. B. Zhou ◽  
D. M. Jiang ◽  
Z. L. Yang
Keyword(s):  
Linear Relationship ◽  
Reduction Rate ◽  
Exhaust Gas Recirculation ◽  
Emission Characteristics ◽  
Exhaust Gas ◽  
Compression Ignition ◽  
Mass Percentage ◽  
Compression Ignition Engine ◽  
Brake Mean Effective Pressure ◽  
Gas Recirculation

Investigations of emission characteristics were carried out on a compression ignition, dimethyl ether engine (DME) with exhaust gas recirculation (EGR) and on a diesel engine with a dimethyl carbonate (DMC) additive. The experimental results show that the DME engine with EGR can simultaneously reduce smoke and NOx emissions. The NOx can be reduced by about 20 per cent for every 10 per cent of EGR introduction, while smoke remains at zero. The diesel equivalent brake specific fuel consumption (b.s.f.c.) shows a slight decrease when DMC is added, while the effective thermal efficiency shows a slight improvement. It is found that the smoke reduction rate and smoke show a linear relationship with DMC percentage or oxygen mass percentage in the diesel fuel. For the specific brake mean effective pressure (b.m.e.p.), smoke will be reduced by 20 per cent for every 10 per cent DMC added and by 40 per cent when the oxygen mass percentage in the fuel reaches 10 per cent. The CO decreases when DMC is added, while NOx shows an increase. This difference is pronounced at a high b.m.e.p. For the specific b.m.e.p., CO and NOx show a linear relationship with DMC mass percentage in the fuel; CO will be reduced by 20 per cent while NOx will be increased by 20 per cent for every 10 per cent DMC added.

Sign in / Sign up

Export Citation Format

Share Document