scholarly journals Near Wellbore Hydraulic Fracture Propagation from Perforations in Tight Rocks: The Roles of Fracturing Fluid Viscosity and Injection Rate

Energies ◽  
2017 ◽  
Vol 10 (3) ◽  
pp. 359 ◽  
Author(s):  
Seyed Fallahzadeh ◽  
Md Hossain ◽  
Ashton James Cornwell ◽  
Vamegh Rasouli
Keyword(s):  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Injection Rate ◽  
Fluid Viscosity ◽  
Fracturing Fluid ◽  
Hydraulic Fracture Propagation ◽  
Tight Rocks

scholarly journals Investigation on the mechanism of hydraulic fracture propagation and fracture geometry control in tight heterogeneous glutenites

2021 ◽  
pp. 014459872110362
Author(s):  
Mingyang Zhai ◽  
Dongying Wang ◽  
Lianchong Li ◽  
Zilin Zhang ◽  
Liaoyuan Zhang ◽  
...  
Keyword(s):  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Injection Rate ◽  
Natural Fracture ◽  
Fluid Viscosity ◽  
Fracture Geometry ◽  
Stimulated Reservoir Volume ◽  
Reservoir Volume ◽  
Fracture Complexity ◽  
Hydraulic Fracture Propagation

The tight heterogeneous glutenites are typically characterized by highly variable lithology, low/ultra-low permeability, significant heterogeneity, and a less-developed natural fracture system. It is of great significance for economic development to improve hydraulic fracture complexity and stimulated reservoir volume. To better understand the hydraulic fracturing mechanism, a large-scale experimental test on glutenite specimens was conducted and the hydraulic fracture propagation behaviors and focal mechanism were analyzed. A three-dimensional numerical model was developed to reproduce the hydraulic fracture evolution process and investigate the effects of operating procedures on hydraulic fracture geometry and stimulated reservoir volume. A simultaneous variable injection rate and fluid viscosity technology was proposed to increase the hydraulic fracture complexity and stimulated reservoir volume. The results indicate that four fracturing behaviors can be observed, namely, penetration, deflection, termination, and bifurcating, in the laboratory experiment. Tensile events tend to appear during the initiation stage of hydraulic fracture growth, while shear events and compressive events tend to appear during the non-planar propagation stage. The shear and compressive mechanisms dominate with an increase in the hydraulic fracture complexity. The variable injection rate technology and simultaneous variable injection rate and fluid viscosity technology are effective techniques for fracture geometry control and stimulated reservoir volume enhancement. The key to improve hydraulic fracture complexity is to increase the net pressure in hydraulic fractures, cause evident pressure fluctuations, and activate or communicate a wide range of natural discontinuities. The results can provide a better understanding of the fracture geometry control mechanism in tight heterogeneous glutenites, and offer a guideline for treatment design and optimization of well performance.

scholarly journals Numerical simulation of horizontal well network fracturing in glutenite reservoir

2018 ◽  
Vol 73 ◽  
pp. 53
Author(s):  
Minhui Qi ◽  
Mingzhong Li ◽  
Yanchao Li ◽  
Tiankui Guo ◽  
Song Gao
Keyword(s):  
Numerical Simulation ◽  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Horizontal Well ◽  
Fracture Propagation ◽  
Simulation Method ◽  
Fracture Network ◽  
Fluid Viscosity ◽  
Coupled Flow ◽  
Hydraulic Fracture Propagation

Hydraulic fracturing is an economically effective technology developing the glutenite reservoirs, which have far stronger heterogeneity than the conventional sandstone reservoir. According to the field production experience of Shengli Oilfield, horizontal-well fracturing is more likely to develop a complex fractured network, which improves the stimulated volume of reservoir effectively. But the clear mechanism of horizontal-well hydraulic fracture propagation in the glutenite reservoirs is still not obtained, thus it is difficult to effectively carry out the design of fracturing plan. Based on the characteristics of the glutenite reservoirs, a coupled Flow-Stress-Damage (FSD) model of hydraulic fracture propagation is established. The numerical simulation of fracturing expansion in the horizontal well of the glutenite reservoir is conducted. It is shown that a square mesh-like fracture network is developed near the horizontal well in the reservoir with lower stress difference, in which fracture is more prone to propagate along the direction of the minimum principal stress as well. High fracturing fluids injection displacement and high fracturing fluid viscosity lead to the rise of static pressure of the fracture, which results in the rise of fracture complexity, and greater probability to deflect when encountering gravels. As the perforation density increases, the micro-fractures generated at each perforation gather together faster, and the range of the stimulated reservoir is also relatively large. For reservoirs with high gravel content, the complexity of fracture network and the effect of fracture communication are obviously increased, and the range of fracture deflection is relatively large. In the case of the same gravel distribution, the higher the tensile strength of the gravel, the greater fracture tortuosity and diversion was observed. In this paper, a simulation method of horizontal well fracture network propagation in the reservoirs is introduced, and the result provides the theoretical support for fracture network morphology prediction and plan design of hydraulic fracturing in the glutenite reservoir.

Finite-Element Simulation of a Hydraulic Fracture Interacting With a Natural Fracture

SPE Journal ◽  
2016 ◽  
Vol 22 (01) ◽  
pp. 219-234 ◽  
Author(s):  
Zuorong Chen ◽  
Robert G. Jeffrey ◽  
Xi Zhang ◽  
James Kear
Keyword(s):  
Finite Element ◽  
Hydraulic Fracture ◽  
Injection Pressure ◽  
Quantitative Information ◽  
Injection Rate ◽  
Interfacial Stress ◽  
Natural Fracture ◽  
Fluid Viscosity ◽  
Fracturing Fluid ◽  
Bedding Planes

Summary In this paper, the problem of a hydraulic fracture (HF) interacting with a pre-existing natural fracture (NF) has been investigated with a cohesive zone finite-element model. The model fully couples fluid flow, fracture propagation, and elastic deformation, taking into account the friction between the contacting fracture surfaces and the interaction between the HF and the NF. The effect of the field conditions—such as in-situ stresses, rock and fracture mechanical and geometrical (initial conductivity of the NF) properties, intersection angle, and the treatment parameters (fracturing fluid viscosity and injection rate)—on the HF propagation behavior has been analyzed. The finite-element-modeling results provide detailed quantitative information on the development of various types of HF/NF interaction, interfacial stress distribution, fracture-geometry evolution, and injection-pressure history, and allow us to gain an in-depth understanding of the relative roles of various parameters. The value of a parameter calculated as the product of fracturing-fluid viscosity and injection rate can be used as an indicator to gauge if crossing or diverting behavior is more likely. In addition, using a finite-element approach allows the analysis to be extended to include the effects of fluid leakoff and poroelastic effect, and allows the study of HF height growth through a system of nonhomogeneous layers and their bedding planes.

scholarly journals Numerical Investigation of Hydraulic Fracture Propagation in Naturally Fractured Reservoirs Based on Lattice Spring Model

Geofluids ◽  
2020 ◽  
Vol 2020 ◽  
pp. 1-18
Author(s):  
Kaikai Zhao ◽  
Pengfei Jiang ◽  
Yanjun Feng ◽  
Xiaodong Sun ◽  
Lixing Cheng ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Fractured Reservoirs ◽  
Fracture Propagation ◽  
Maximum Principal Stress ◽  
Injection Rate ◽  
Naturally Fractured Reservoirs ◽  
Fluid Viscosity ◽  
Global Orientation ◽  
Hf Propagation

Hydraulic fracturing has been extensively employed for permeability enhancement in low-permeability reservoirs. The geometry of the hydraulic fracture network (HFN) may have implications for the optimization of hydraulic fracturing operations. Various parameters, including the in situ stress, treatment parameters (injection rate and fluid viscosity), and orientation of natural fractures (NFs), can significantly affect the interactions between hydraulic fracture (HF) and NFs and the final HFN. In this study, a lattice-spring code was employed to determine the impact of various parameters on the geometry of the HFN. The modelling results indicated that with a large stress difference, the global orientation of the fracture propagation was restricted to the direction of maximum principal stress, and the number of fracture branches was reduced. The geometry of the HFN changed from circular to elliptical. In contrast, with an increase in the fluid viscosity/injection rate, the evolution of the geometry of the HFN exhibited the opposite trend. The global orientation of HF propagation tended to remain parallel to the direction of maximum principal stress, regardless of the branching and tortuosity of the fracture. The variations in the ratio of tensile fracture (HF) to shear fracture (shear slip on NF) can be significant, depending on the stress state, treatment parameters, and preexisting NF network, which determine the dominant stimulation mechanism. This study provides insight into the HF propagation in naturally fractured reservoirs.

Integration of Dynamic Microseismic Data With a True 3D Modeling of Hydraulic-Fracture Propagation in the Vaca Muerta Shale

SPE Journal ◽  
2017 ◽  
Vol 22 (06) ◽  
pp. 1714-1738 ◽  
Author(s):  
Mahdi Haddad ◽  
Jing Du ◽  
Sandrine Vidal-Gilbert
Keyword(s):  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Natural Fracture ◽  
Zone Model ◽  
Fluid Viscosity ◽  
Fracture Intersection ◽  
Vaca Muerta ◽  
Hydraulic Fracture Propagation ◽  
Microseismic Events

Summary Microseismic mapping during the hydraulic-fracturing processes in the Vaca Muerta (VM) Shale in Argentina shows a group of microseismic events occurring at shallower depth and at later injection time, and they clearly deviate from the growing planar hydraulic fracture. This spatial and temporal behavior of these shallow microseismic events incurs some questions regarding the nature of these events and their connectivity to the hydraulic fracture. To answer these questions, in this article, we investigate these phenomena by use of a true 3D fracture-propagation-modeling tool along with statistical analysis on the properties of microseismic events. First, we propose a novel technique in Abaqus incorporating fracture intersections in true 3D hydraulic-fracture-propagation simulations by use of a pore-pressure cohesive zone model (CZM), which is validated by comparing our numerical results with the Khristianovic-Geertsma-de Klerk (KGD) solution (Khristianovic and Zheltov 1955; Geertsma and de Klerk 1969). The simulations fully couple slot flow in the fracture with poroelasticity in the matrix and continuum-based leakoff on the fracture walls, and honor the fracture-tip effects in quasibrittle shales. By use of this model, we quantify vertical-natural-fracture activation and fluid infiltration depending on reservoir depth, fracturing-fluid viscosity, mechanical properties of the natural-fracture cohesive layer, natural-fracture conductivity, and horizontal stress contrast. The modeling results demonstrate this natural-fracture activation in coincidence with the hydraulic-fracture-growth complexities at the intersection, such as height throttling, sharp aperture reduction after the intersection, and multibranching at various heights and directions. Finally, we investigate the hydraulic-fracture intersection with a natural fracture in the multilayer VM Shale. We infer the natural-fracture location and orientation from the microseismic-events map and formation microimager log in a nearby vertical well, respectively. We integrate the other field information such as mechanical, geological, and operational data to provide a realistic hydraulic-fracturing simulation in the presence of a natural fracture. Our 3D fracturing simulations equipped with the new fracture-intersection model rigorously simulate the growth of a realistic hydraulic-connection path toward the natural fracture at shallower depths, which was in agreement with our microseismic observations.

Toughness-Dominated Hydraulic Fracture in Permeable Rocks

2017 ◽  
Vol 84 (7) ◽  
Author(s):  
Xuelin Dong ◽  
Guangqing Zhang ◽  
Deli Gao ◽  
Zhiyin Duan
Keyword(s):  
Hydraulic Fracture ◽  
Crack Opening ◽  
Fluid Pressure ◽  
Fracture Propagation ◽  
Early Time ◽  
Injection Rate ◽  
Asymptotic Solutions ◽  
Late Time ◽  
Fluid Viscosity ◽  
Propagation Regime

A solution to the problem of a hydraulic fracture driven by an incompressible Newtonian fluid at a constant injection rate in a permeable rock is presented in this paper. A set of governing equations are formed to obtain the fracture half-length, crack opening, and net fluid pressure. The solution is derived under the assumptions of plane strain, zero lag between fluid front and crack tip, followed by negligible fluid viscosity. The last assumption is related to a toughness-dominated fracture propagation regime therefore leading to a uniform fluid pressure along the crack surface. Early-time and late-time asymptotic solutions are obtained, which correspond to both regimes when the fluid contains within the crack and most of the injected fluid infiltrates into the rock, respectively. It is shown that these asymptotic solutions are in a simple form when the fracture propagation is dominated by the material toughness. The transient solution for the evolution from the early time to the late time is also obtained by a numerical method.

Sign in / Sign up

Export Citation Format

Share Document