scholarly journals Effect of Injection Flow Rate on Product Gas Quality in Underground Coal Gasification (UCG) Based on Laboratory Scale Experiment: Development of Co-Axial UCG System

Energies ◽  
2017 ◽  
Vol 10 (2) ◽  
pp. 238 ◽  
Author(s):  
Akihiro Hamanaka ◽  
Fa-qiang Su ◽  
Ken-ichi Itakura ◽  
Kazuhiro Takahashi ◽  
Jun-ichi Kodama ◽  
...  
Keyword(s):  
Flow Rate ◽  
Coal Gasification ◽  
Laboratory Scale ◽  
Underground Coal Gasification ◽  
Injection Flow Rate ◽  
Injection Flow ◽  
Product Gas ◽  
Scale Experiment

scholarly journals Evaluation of the impact of viscosity, injection volume, and injection flow rate on subcutaneous injection tolerance

2015 ◽  
pp. 473 ◽  
Author(s):  
Florence Schwarzenbach ◽  
Cecile Berteau ◽  
Orchidee Filipe-Santos ◽  
Tao Wang ◽  
Humberto Rojas ◽  
...  
Keyword(s):  
Flow Rate ◽  
Subcutaneous Injection ◽  
Injection Volume ◽  
Injection Flow Rate ◽  
Injection Flow ◽  
The Impact

Effect Of Equivalent Ratio (ER) On the Flow and Combustion Characteristics in A Typical Underground Coal Gasification (UCG) Cavity

2021 ◽  
Vol 86 (2) ◽  
pp. 28-38
Author(s):  
Arup Kumar Biswas ◽  
Wasu Suksuwan ◽  
Khamphe Phoungthong ◽  
Makatar Wae-hayee
Keyword(s):  
Mass Flow ◽  
Flow Rate ◽  
Gas Flow ◽  
Coal Gasification ◽  
High Efficiency ◽  
Combustion Characteristics ◽  
Raw Material ◽  
Underground Coal Gasification ◽  
Equivalent Ratio ◽  
Rubble Pile

Underground Coal Gasification (UCG) is thought to be the most favourable clean coal technology option from geological-engineering-environmental viewpoint (less polluting and high efficiency) for extracting energy from coal without digging it out or burning it on the surface. UCG process requires only injecting oxidizing agent (O2 or air with steam) as raw material, into the buried coal seam, at an effective ratio which regulates the performance of gasification. This study aims to evaluate the influence of equivalent ratio (ER) on the flow and combustion characteristics in a typical half tear-drop shape of UCG cavity which is generally formed during the UCG process. A flow modeling software, Ansys FLUENT is used to construct a 3-D model and to solve problems in the cavity. The boundary conditions are- (i) a mass-flow-inlet passing oxidizer (in this case, air) into the cavity, (ii) a fuel-inlet where the coal volatiles are originated and (iii) a pressure-outlet for flowing the product Syngas out of the cavity. A steady-state simulation has been run using k-? turbulence model. The mass flow rate of air varied according to an equivalent ratio (ER) of 0.16, 0.33, 0.49 and 0.82, while the fuel flow rate was fixed. The optimal condition of ER has been identified through observing flow and combustion characteristics, which looked apparently stable at ER 0.33. In general, the flow circulation mainly takes place around the ash-rubble pile. A high temperature zone is found at the air-releasing point of the injection pipe into the ash-rubble pile. This study could practically be useful to identify one of the vital controlling factors of gasification performance (i.e., ER impact on product gas flow characteristics) which might become a cost-effective solution in advance of commencement of any physical operation.

scholarly journals Characterization of venturi injector using dimensional analysis

2019 ◽  
Vol 23 (7) ◽  
pp. 484-491 ◽  
Author(s):  
Luiz R. Sobenko ◽  
José A. Frizzone ◽  
Antonio P. de Camargo ◽  
Ezequiel Saretta ◽  
Hermes S. da Rocha
Keyword(s):  
Dimensional Analysis ◽  
Flow Rate ◽  
Injection Rate ◽  
Operating Conditions ◽  
Functional Tests ◽  
Injection Flow Rate ◽  
Injection Flow ◽  
Hydraulic Conditions ◽  
Fluid Properties ◽  
Pi Theorem

ABSTRACT Venturi injectors are commonly employed for fertigation purposes in agriculture, in which they draw fertilizer from a tank into the irrigation pipeline. The knowledge of the amount of liquid injected by this device is used to ensure an adequate fertigation operation and management. The objectives of this research were (1) to carry out functional tests of Venturi injectors following requirements stated by ISO 15873; and (2) to model the injection rate using dimensional analysis by the Buckingham Pi theorem. Four models of Venturi injectors were submitted to functional tests using clean water as motive and injected fluid. A general model for predicting injection flow rate was proposed and validated. In this model, the injection flow rate depends on the fluid properties, operating hydraulic conditions and geometrical characteristics of the Venturi injector. Another model for estimating motive flow rate as a function of inlet pressure and differential pressure was adjusted and validated for each size of Venturi injector. Finally, an example of an application was presented. The Venturi injector size was selected to fulfill the requirements of the application and the operating conditions were estimated using the proposed models.

scholarly journals Influence of mineralization and injection flow rate on flow patterns in three-dimensional porous media

2019 ◽  
Vol 21 (27) ◽  
pp. 14605-14611 ◽  
Author(s):  
R. Moosavi ◽  
A. Kumar ◽  
A. De Wit ◽  
M. Schröter
Keyword(s):  
Porous Media ◽  
Flow Field ◽  
Flow Rate ◽  
Three Dimensional ◽  
Flow Patterns ◽  
Low Flow ◽  
Flow Rates ◽  
Injection Flow Rate ◽  
Injection Flow

At low flow rates, the precipitate forming at the miscible interface between two reactive solutions guides the evolution of the flow field.

Characteristics of "Three Zones" during Underground Coal Gasification

2012 ◽  
Vol 524-527 ◽  
pp. 56-62 ◽  
Author(s):  
Hong Tao Liu ◽  
Hong Yao ◽  
Kai Yao ◽  
Feng Chen ◽  
Guang Qian Luo
Keyword(s):  
Large Scale ◽  
Coal Gasification ◽  
Basic Knowledge ◽  
Gas Composition ◽  
Underground Coal Gasification ◽  
Reduction Zone ◽  
Gasification Process ◽  
Product Gas ◽  
Dry Distillation ◽  
Major Chemical

According to the temperature, major chemical reactions and gas compositions, the gasification process along the tunnel of underground coal gasification is divided into three zones, i.e. oxidation zone, reduction zone and dry distillation zone. A model test in the laboratory was carried out by using large-scale coal blocks to simulate the coal seam. The characteristics of the “three zones”, and the relation between the temperature and gas composition were also quantitative studied. It provided the necessary basic knowledge for further studying the process of underground coal gasification, including predicting compositions of product gas, life-cycle analyzing, selecting optimistic control parameters and determining suitable gasification craft.

The Coupling Model of Wellbore Conduit Flow, Throttled Flow and Formation Seepage in Water Injection Wells

2012 ◽  
Vol 594-597 ◽  
pp. 2486-2489
Author(s):  
Bao Jun Liu ◽  
Hai Xia Shi ◽  
Yun Sheng Cai
Keyword(s):  
Flow Rate ◽  
Water Injection ◽  
Coupling Model ◽  
Water Flooding ◽  
Finite Radius ◽  
Injection Wells ◽  
Conduit Flow ◽  
Injection Flow Rate ◽  
Injection Flow ◽  
Low Efficiency

Separate layer water flooding is adopted in most oilfields in China and the injection flow rate is controlled by the diameter of water nozzle of each layer. In order to ensure the effect of water injection, applicable water nozzles need to be adjusted to meet the requirements of injection flow rate. The adjustment is commonly realized according to experience, which leads to long adjustment time and low efficiency. To solve this problem, the coupling model of wellbore conduit flow, throttled flow and formation seepage was established based on theoretical analysis, which could provide theoretical basis for water nozzles adjustment. In the model, the Bernoulli Equation was adopted to analyze wellbore conduit flow; indoor experiments were done to research throttled flow; the research object of the seepage was finite radius well in homogeneous infinite formation.

Experimental Analysis of CO2 Injection on Permeability of Vuggy Carbonate Aquifers

2012 ◽  
Vol 135 (1) ◽  
Author(s):  
Ibrahim M. Mohamed ◽  
Jia He ◽  
Hisham A. Nasr-El-Din
Keyword(s):  
Flow Rate ◽  
Initial Permeability ◽  
Co2 Injection ◽  
Reaction Products ◽  
The Core ◽  
Injection Flow Rate ◽  
Injection Flow ◽  
Injection Scheme ◽  
Core Permeability ◽  
Permeability Alteration

Reactions of CO2 with formation rock may lead to an enhancement in the permeability due to rock dissolution, or damage (reduction in the core permeability) because of the precipitation of reaction products. The reaction is affected by aquifer conditions (pressure, temperature, initial porosity, and permeability), and the injection scheme (injection flow rate, CO2:brine volumetric ratio, and the injection time). The effects of temperature, injection flow rate, and injection scheme on the permeability alteration due to CO2 injection into heterogeneous dolomite rock is addressed experimentally in this paper. Twenty coreflood tests were conducted using Silurian dolomite cores. Thirty pore volumes of CO2 and brine were injected in water alternating gas (WAG) scheme under supercritical conditions at temperatures ranging from 21 to 121 °C, and injection rates of 2.0–5.0 cm3/min. Concentrations of Ca++, Mg++, and Na+ were measured in the core effluent samples. Permeability alteration was evaluated by measuring the permeability of the cores before and after the experiment. Two sources of damage in permeability were noted in this study: (1) due to precipitation of calcium carbonate, and (2) due to migration of clay minerals present in the core. Temperature and injection scheme don't have a clear impact on the core permeability. A good correlation between the initial and final core permeability was noted, and the ratio of final permeability to the initial permeability is lower for low permeability cores.

Sign in / Sign up

Export Citation Format

Share Document