scholarly journals Design and Application of Biomedical Circuits and Systems

Electronics ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 1920
Author(s):  
Alberto Yúfera ◽  
Gloria Huertas ◽  
Belen Calvo
Keyword(s):  
Mechanical Systems ◽  
Microfluidic Systems ◽  
Micro Electro Mechanical Systems ◽  
Microelectronic Devices ◽  
Biomedical Circuits ◽  
Design And Application

The development of new sensing technologies, biomaterials, microelectronic devices, microfluidic systems and micro-electro-mechanical systems (MEMs) etc [...]

scholarly journals Self-Cleaning: From Bio-Inspired Surface Modification to MEMS/Microfluidics System Integration

Micromachines ◽  
2019 ◽  
Vol 10 (2) ◽  
pp. 101 ◽  
Author(s):  
Di Sun ◽  
Karl Böhringer
Keyword(s):  
Surface Modification ◽  
System Integration ◽  
State Of The Art ◽  
Mechanical Systems ◽  
Surface Cleaning ◽  
Practical Application ◽  
Microfluidic Systems ◽  
Micro Electro Mechanical Systems ◽  
Self Cleaning ◽  
Digital Microfluidic

This review focuses on self-cleaning surfaces, from passive bio-inspired surface modification including superhydrophobic, superomniphobic, and superhydrophilic surfaces, to active micro-electro-mechanical systems (MEMS) and digital microfluidic systems. We describe models and designs for nature-inspired self-cleaning schemes as well as novel engineering approaches, and we discuss examples of how MEMS/microfluidic systems integrate with functional surfaces to dislodge dust or undesired liquid residues. Meanwhile, we also examine “waterless” surface cleaning systems including electrodynamic screens and gecko seta-inspired tapes. The paper summarizes the state of the art in self-cleaning surfaces, introduces available cleaning mechanisms, describes established fabrication processes and provides practical application examples.

Optical phase modulators using deformable waveguides actuated by micro-electro-mechanical systems

2011 ◽  
Vol 36 (7) ◽  
pp. 1089 ◽  
Author(s):  
Wei-Chao Chiu ◽  
Chun-Che Chang ◽  
Jiun-Ming Wu ◽  
Ming-Chang M. Lee ◽  
Jia-Min Shieh
Keyword(s):  
Mechanical Systems ◽  
Micro Electro Mechanical Systems ◽  
Optical Phase ◽  
Phase Modulators ◽  
Optical Phase Modulators

scholarly journals Wash Testing of Electronic Yarn

Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1228 ◽  
Author(s):  
Dorothy Anne Hardy ◽  
Zahra Rahemtulla ◽  
Achala Satharasinghe ◽  
Arash Shahidi ◽  
Carlos Oliveira ◽  
...  
Keyword(s):  
Research Group ◽  
Copper Wire ◽  
Mechanical Systems ◽  
Consumer Products ◽  
Temperature Sensing ◽  
Micro Electro Mechanical Systems ◽  
Acoustic Sensing ◽  
Protective Polymer ◽  
Wash Durability

Electronically active yarn (E-yarn) pioneered by the Advanced Textiles Research Group of Nottingham Trent University contains a fine conductive copper wire soldered onto a package die, micro-electro-mechanical systems device or flexible circuit. The die or circuit is then held within a protective polymer packaging (micro-pod) and the ensemble is inserted into a textile sheath, forming a flexible yarn with electronic functionality such as sensing or illumination. It is vital to be able to wash E-yarns, so that the textiles into which they are incorporated can be treated as normal consumer products. The wash durability of E-yarns is summarized in this publication. Wash tests followed a modified version of BS EN ISO 6330:2012 procedure 4N. It was observed that E-yarns containing only a fine multi-strand copper wire survived 25 cycles of machine washing and line drying; and between 5 and 15 cycles of machine washing followed by tumble-drying. Four out of five temperature sensing E-yarns (crafted with thermistors) and single pairs of LEDs within E-yarns functioned correctly after 25 cycles of machine washing and line drying. E-yarns that required larger micro-pods (i.e., 4 mm diameter or 9 mm length) were less resilient to washing. Only one out of five acoustic sensing E-yarns (4 mm diameter micro-pod) operated correctly after 20 cycles of washing with either line drying or tumble-drying. Creating an E-yarn with an embedded flexible circuit populated with components also required a relatively large micro-pod (diameter 0.93 mm, length 9.23 mm). Only one embedded circuit functioned after 25 cycles of washing and line drying. The tests showed that E-yarns are suitable for inclusion in textiles that require washing, with some limitations when larger micro-pods were used. Reduction in the circuit’s size and therefore the size of the micro-pod, may increase wash resilience.

Micro-spectrophotometer based on micro electro-mechanical systems technology

2008 ◽  
Vol 3 (1) ◽  
pp. 37-43
Author(s):  
Lianqun Zhou ◽  
Yihui Wu ◽  
Ping Zhang ◽  
Ming Xuan ◽  
Zhenggang Li ◽  
...  
Keyword(s):  
Mechanical Systems ◽  
Micro Electro Mechanical Systems

Load Monitoring of Aerospace Structures Using Micro-Electro-Mechanical Systems (MEMS)

2012 ◽  
Author(s):  
M. Martinez ◽  
B. Rocha ◽  
M. Li ◽  
G. Shi ◽  
A. Beltempo ◽  
...  
Keyword(s):  
Least Squares ◽  
Mechanical Systems ◽  
National Research Council ◽  
Micro Electro Mechanical Systems ◽  
Displacement Estimation ◽  
Polynomial Fit ◽  
Load Monitoring ◽  
Variable Displacement ◽  
Displacement Transducers ◽  
Spatial Locations

The National Research Council of Canada has developed Structural Health Monitoring (SHM) test platforms for load and damage monitoring, sensor system testing and validation. One of the SHM platform consists of two 2.25 meter long, simple cantilever aluminium beams that provide a perfect scenario for evaluating the capability of a load monitoring system to measure bending, torsion and shear loads. In addition to static and quasi-static loading procedures, these structures can be fatigue loaded using a realistic aircraft usage spectrum while SHM and load monitoring systems are assessed for their performance and accuracy. In this study, Micro-Electro-Mechanical Systems (MEMS), consisting of triads of gyroscopes, accelerometers and magnetometers, were used to compute changes in angles at discrete stations along the structure. A Least Squares based algorithm was developed for polynomial fitting of the different data obtained from the MEMS installed in several spatial locations of the structure. The angles obtained from the MEMS sensors were fitted with a second, third and/or fourth order degree polynomial surface, enabling the calculation of displacements at every point. The use of a novel Kalman filter architecture was evaluated for an accurate angle and subsequent displacement estimation. The outputs of the newly developed algorithms were then compared to the displacements obtained from the Linear Variable Displacement Transducers (LVDT) connected to the structures. The determination of the best Least Squares based polynomial fit order enabled the application of derivative operators with enough accuracy to permit the calculation of strains along the structure. The calculated strain values were subsequently compared to the measurements obtained from reference strain gauges installed at different locations on the structure. This new approach for load monitoring was able to provide accurate estimates of applied strains and loads.

Growth and Characterization of 3C-SiC Films for Micro Electro Mechanical Systems (MEMS) Applications

2009 ◽  
Vol 9 (11) ◽  
pp. 4852-4859 ◽  
Author(s):  
Matteo Bosi ◽  
Bernard E. Watts ◽  
Giovanni Attolini ◽  
Claudio Ferrari ◽  
Cesare Frigeri ◽  
...  
Keyword(s):  
Mechanical Systems ◽  
Micro Electro Mechanical Systems ◽  
Sic Films
Sign in / Sign up

Export Citation Format

Share Document