scholarly journals Radio–Image Transformer: Bridging Radio Modulation Classification and ImageNet Classification

Electronics ◽  
2020 ◽  
Vol 9 (10) ◽  
pp. 1646
Author(s):  
Shichuan Chen ◽  
Kunfeng Qiu ◽  
Shilian Zheng ◽  
Qi Xuan ◽  
Xiaoniu Yang
Keyword(s):  
Orthogonal Frequency Division Multiplexing ◽  
Network Models ◽  
Poor Performance ◽  
Classification Performance ◽  
Mapping Method ◽  
Experimental Results ◽  
Modulation Classification ◽  
Radio Image ◽  
Time Frequency ◽  
Modulation Type

Radio modulation classification is widely used in the field of wireless communication. In this paper, in order to realize radio modulation classification with the help of the existing ImageNet classification models, we propose a radio–image transformer which extracts the instantaneous amplitude, instantaneous phase and instantaneous frequency from the received radio complex baseband signals, then converts the signals into images by the proposed signal rearrangement method or convolution mapping method. We finally use the existing ImageNet classification network models to classify the modulation type of the signal. The experimental results show that the proposed signal rearrangement method and convolution mapping method are superior to the methods using constellation diagrams and time–frequency images, which shows their performance advantages. In addition, by comparing the results of the seven ImageNet classification network models, it can be seen that, except for the relatively poor performance of the architecture MNASNet1_0, the modulation classification performance obtained by the other six network architectures is similar, indicating that the proposed methods do not have high requirements for the architecture of the selected ImageNet classification network models. Moreover, the experimental results show that our method has good classification performance for signal datasets with different sampling rates, Orthogonal Frequency Division Multiplexing (OFDM) signals and real measured signals.

An Implicit to Explicit FEA Solving of Tire F&M with Detailed Tread Blocks

2012 ◽  
Vol 40 (2) ◽  
pp. 83-107 ◽  
Author(s):  
Zhao Li ◽  
Ziran R. Li ◽  
Yuanming M. Xia
Keyword(s):  
Test System ◽  
Mapping Method ◽  
Friction Model ◽  
Experimental Results ◽  
Slip Angle ◽  
Slip Ratio ◽  
The Road ◽  
Numerical Noise ◽  
Nonlinear Stress ◽  
Solving Strategy

ABSTRACT A detailed tire-rolling model (185/75R14), using the implicit to explicit FEA solving strategy, was constructed to provide a reliable, dynamic simulation with several modeling features, including mesh, material modeling, and a solving strategy that could contribute to the consideration of the serious numerical noises. High-quality hexahedral meshes of tread blocks were obtained with a combined mapping method. The actual rubber distributing and nonlinear, stress-strain relationship of the rubber and bilinear elastic reinforcement were modeled for realism. In addition, a tread-rubber friction model obtained from the Laboratory Abrasion and Skid Tester (LAT 100) was applied to simulate the interaction of the tire with the road. The force and moment (F&) behaviors of tire cornering when subjected to a slip-angle sweep of −10 to 10° were studied with that model. To demonstrate the efficiency of the proposed simulation, the computed F&M were compared with experimental results from an MTS Flat-Trac Tire Test System. The computed cornering F&M agreed well with the experimental results, so the footprint shape and contact pressure distribution of several cornering conditions were investigated. Furthermore, the longitudinal forces in response to braking/driving torque application in a slip-ratio range of −100% to 100% were computed. The proposed FEA solution confines the numerical noise within a smaller range and can serve as a valid tool in tire design.

Improving Space-Time-Frequency MIMO-OFDM with ICI Self-Cancellation Scheme using Least Square Error Estimator

2015 ◽  
Vol 12 (1) ◽  
pp. 25
Author(s):  
Nur Farahiah Ibrahim ◽  
Zahari Abu Bakar ◽  
Azlina Idris
Keyword(s):  
Channel Estimation ◽  
Orthogonal Frequency Division Multiplexing ◽  
Symbol Error Rate ◽  
Space Time ◽  
Least Square ◽  
Error Estimator ◽  
Frequency Diversity ◽  
Time Frequency ◽  
Mimo Ofdm ◽  
Subcarrier Mapping

Channel estimation techniques for Multiple-input Multiple-output Orthogonal Frequency Division Multiplexing (MIMO-OFDM) based on comb type pilot arrangement with least-square error (LSE) estimator was investigated with space-time-frequency (STF) diversity implementation. The frequency offset in OFDM effected its performance. This was mitigated with the implementation of the presented inter-carrier interference self-cancellation (ICI-SC) techniques and different space-time subcarrier mapping. STF block coding in the system exploits the spatial, temporal and frequency diversity to improve performance. Estimated channel was fed into a decoder which combined the STF decoding together with the estimated channel coefficients using LSE estimator for equalization. The performance of the system was compared by measuring the symbol error rate with a PSK-16 and PSK-32. The results show that subcarrier mapping together with ICI-SC were able to increase the system performance. Introduction of channel estimation was also able to estimate the channel coefficient at only 5dB difference with a perfectly known channel.

Acoustic-based Upper Facial Action Recognition for Smart Eyewear

2021 ◽  
Vol 5 (2) ◽  
pp. 1-28
Author(s):  
Wentao Xie ◽  
Qian Zhang ◽  
Jin Zhang
Keyword(s):  
Frequency Domain ◽  
Orthogonal Frequency Division Multiplexing ◽  
Interaction Mechanism ◽  
Phase Changes ◽  
Experimental Result ◽  
Selective Fading ◽  
Time Frequency ◽  
Facial Action ◽  
Frequency Selective Fading ◽  
Frequency Selective

Smart eyewear (e.g., AR glasses) is considered to be the next big breakthrough for wearable devices. The interaction of state-of-the-art smart eyewear mostly relies on the touchpad which is obtrusive and not user-friendly. In this work, we propose a novel acoustic-based upper facial action (UFA) recognition system that serves as a hands-free interaction mechanism for smart eyewear. The proposed system is a glass-mounted acoustic sensing system with several pairs of commercial speakers and microphones to sense UFAs. There are two main challenges in designing the system. The first challenge is that the system is in a severe multipath environment and the received signal could have large attenuation due to the frequency-selective fading which will degrade the system's performance. To overcome this challenge, we design an Orthogonal Frequency Division Multiplexing (OFDM)-based channel state information (CSI) estimation scheme that is able to measure the phase changes caused by a facial action while mitigating the frequency-selective fading. The second challenge is that because the skin deformation caused by a facial action is tiny, the received signal has very small variations. Thus, it is hard to derive useful information directly from the received signal. To resolve this challenge, we apply a time-frequency analysis to derive the time-frequency domain signal from the CSI. We show that the derived time-frequency domain signal contains distinct patterns for different UFAs. Furthermore, we design a Convolutional Neural Network (CNN) to extract high-level features from the time-frequency patterns and classify the features into six UFAs, namely, cheek-raiser, brow-raiser, brow-lower, wink, blink and neutral. We evaluate the performance of our system through experiments on data collected from 26 subjects. The experimental result shows that our system can recognize the six UFAs with an average F1-score of 0.92.

scholarly journals Time–Frequency-Analysis-Based Blind Modulation Classification for Multiple-Antenna Systems

Sensors ◽  
2021 ◽  
Vol 21 (1) ◽  
pp. 231
Author(s):  
Weiheng Jiang ◽  
Xiaogang Wu ◽  
Yimou Wang ◽  
Bolin Chen ◽  
Wenjiang Feng ◽  
...  
Keyword(s):  
Frequency Analysis ◽  
Classification Accuracy ◽  
Communication Systems ◽  
Mimo Systems ◽  
Decision Fusion ◽  
Frequency Characteristics ◽  
Modulation Classification ◽  
Time Frequency Analysis ◽  
Time Frequency ◽  
Average Classification Accuracy

Blind modulation classification is an important step in implementing cognitive radio networks. The multiple-input multiple-output (MIMO) technique is widely used in military and civil communication systems. Due to the lack of prior information about channel parameters and the overlapping of signals in MIMO systems, the traditional likelihood-based and feature-based approaches cannot be applied in these scenarios directly. Hence, in this paper, to resolve the problem of blind modulation classification in MIMO systems, the time–frequency analysis method based on the windowed short-time Fourier transform was used to analyze the time–frequency characteristics of time-domain modulated signals. Then, the extracted time–frequency characteristics are converted into red–green–blue (RGB) spectrogram images, and the convolutional neural network based on transfer learning was applied to classify the modulation types according to the RGB spectrogram images. Finally, a decision fusion module was used to fuse the classification results of all the receiving antennas. Through simulations, we analyzed the classification performance at different signal-to-noise ratios (SNRs); the results indicate that, for the single-input single-output (SISO) network, our proposed scheme can achieve 92.37% and 99.12% average classification accuracy at SNRs of −4 and 10 dB, respectively. For the MIMO network, our scheme achieves 80.42% and 87.92% average classification accuracy at −4 and 10 dB, respectively. The proposed method greatly improves the accuracy of modulation classification in MIMO networks.

scholarly journals Multilayer Learning Network for Modulation Classification Assisted with Frequency Offset Cancellation in Satellite to Ground Link

2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Guan Qing Yang
Keyword(s):  
Carrier Frequency ◽  
Carrier Frequency Offset ◽  
Frequency Offset ◽  
Training Sequence ◽  
Classification Performance ◽  
Modulation Classification ◽  
Correct Classification ◽  
Offset Cancellation ◽  
Learning Network ◽  
Hidden Layer

A multilayer learning network assisted with frequency offset cancellation is proposed for modulation classification in satellite to ground link. Carrier frequency offset greatly reduces modulation classification performance. It is necessary to cancel frequency offset before modulation classification. Frequency offset cancellation weights are established through multilayer learning network based on MSE criterion. Then the weight and hidden layer of multilayer learning network are also established for modulation classification. The hidden layers and weight are trained and tuned to combat the interference introduced by frequency offset. Compared with current modulation classification algorithm, the proposed multilayer learning network greatly improves the Probability of Correct Classification (PCC). It has been proven that the proposed multilayer learning network assisted with frequency offset has higher performance for modulation classification within the same training sequence.

AR-Tri-Training: Tri-Training with Assistant Strategy

2014 ◽  
Vol 513-517 ◽  
pp. 1840-1844 ◽  
Author(s):  
Long Jie Cui ◽  
Hong Li Wang ◽  
Rong Yi Cui
Keyword(s):  
Learning Strategy ◽  
Voice Recognition ◽  
Classification Performance ◽  
Experimental Results ◽  
Training Algorithm ◽  
Information Strategy ◽  
Testing Rate ◽  
Rich Information ◽  
Validation Set

The classification performance of the classifier is weakened because the noise samples are introduced for the use of unlabeled samples in Tri-training. In this paper a new Tri-training style algorithm named AR-Tri-training (Tri-training with assistant and rich strategy) is proposed. Firstly, the assistant learning strategy is posed. Then the supporting learner is designed by combining the assistant learning strategy with rich information strategy. The number of mislabeled samples produced in the iterations of three classifiers mutually labeling are reduced by use of the supporting learner, moreover the unlabeled samples and the misclassified samples of validation set can be fully used. The proposed algorithm is applied to voice recognition. The experimental results show that AR-Tri-training algorithm can compensate for the shortcomings of Tri-training algorithm, further improve the testing rate.

scholarly journals Individual differences among deep neural network models

2020 ◽  
Author(s):  
Johannes Mehrer ◽  
Courtney J. Spoerer ◽  
Nikolaus Kriegeskorte ◽  
Tim C. Kietzmann
Keyword(s):  
Individual Differences ◽  
Visual Recognition ◽  
Initial Conditions ◽  
Network Models ◽  
Classification Performance ◽  
Neural Network Models ◽  
Multiple Networks ◽  
Modelling Framework ◽  
Neural Computations ◽  
Category Exemplars

AbstractDeep neural networks (DNNs) excel at visual recognition tasks and are increasingly used as a modelling framework for neural computations in the primate brain. However, each DNN instance, just like each individual brain, has a unique connectivity and representational profile. Here, we investigate individual differences among DNN instances that arise from varying only the random initialization of the network weights. Using representational similarity analysis, we demonstrate that this minimal change in initial conditions prior to training leads to substantial differences in intermediate and higher-level network representations, despite achieving indistinguishable network-level classification performance. We locate the origins of the effects in an under-constrained alignment of category exemplars, rather than a misalignment of category centroids. Furthermore, while network regularization can increase the consistency of learned representations, considerable differences remain. These results suggest that computational neuroscientists working with DNNs should base their inferences on multiple networks instances instead of single off-the-shelf networks.

scholarly journals Orthogonal Time Sequency Multiplexing Modulation

2021 ◽  
Author(s):  
Tharaj Thaj ◽  
Emanuele Viterbo
Keyword(s):  
Time Domain ◽  
Orthogonal Frequency Division Multiplexing ◽  
High Performance ◽  
High Mobility ◽  
Low Complexity ◽  
Modulation Scheme ◽  
Frequency Space ◽  
Time Frequency ◽  
Single Carrier ◽  
The Time Domain

This paper proposes <i>orthogonal time sequency multiplexing</i> (OTSM), a novel single carrier modulation scheme based on the well known Walsh-Hadamard transform (WHT) combined with row-column interleaving, and zero padding (ZP) between blocks in the time-domain. The information symbols in OTSM are multiplexed in the delay and sequency domain using a cascade of time-division and Walsh-Hadamard (sequency) multiplexing. By using the WHT for transmission and reception, the modulation and demodulation steps do not require any complex multiplications. We then propose two low-complexity detectors: (i) a simpler non-iterative detector based on a single tap minimum mean square time-frequency domain equalizer and (ii) an iterative time-domain detector. We demonstrate, via numerical simulations, that the proposed modulation scheme offers high performance gains over orthogonal frequency division multiplexing (OFDM) and exhibits the same performance of orthogonal time frequency space (OTFS) modulation, but with lower complexity. In proposing OTSM, along with simple detection schemes, we offer the lowest complexity solution to achieving reliable communication in high mobility wireless channels, as compared to the available schemes published so far in the literature.

Acoustic Scenery Recognition Using CWT and Deep Neural Network

2021 ◽  
Author(s):  
Francisco Mondragon ◽  
Jonathan Jimenez ◽  
Mariko Nakano ◽  
Toru Nakashika ◽  
Hector Perez-Meana
Keyword(s):  
Neural Network ◽  
Deep Neural Network ◽  
Color Image ◽  
Classification Performance ◽  
Science And Engineering ◽  
Time Frequency ◽  
Frequency Representation ◽  
Public Data ◽  
Recognition Systems ◽  
Color Map

The development of acoustic scenes recognition systems has been a topic of extensive research due to its applications in several fields of science and engineering. This paper proposes an environmental system in which firstly a time-frequency representation is obtained using the Continuous Wavelet Transform (CWT). The time frequency representation is then represented as a color image using the Viridis color map, which is then inserted into a Deep Neural Network (DNN) to carry out the classification task. Evaluation results using several public data bases show that proposed scheme provides a classification performance better than the performance provided by other previously proposed schemes.

Sign in / Sign up

Export Citation Format

Share Document