scholarly journals Affordable and Faster Transradial Prosthetic Socket Production Using Photogrammetry and 3D Printing

Electronics ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 1456
Author(s):  
Rifky Ismail ◽  
Rilo Berdin Taqriban ◽  
Mochammad Ariyanto ◽  
Ali Tri Atmaja ◽  
Sugiyanto ◽  
...  
Keyword(s):  
3D Printing ◽  
3D Model ◽  
Low Cost ◽  
Digital Camera ◽  
Processing Method ◽  
3D Printer ◽  
Casting Method ◽  
Conventional Casting ◽  
Prosthetic Socket ◽  
3D Printed

This study aims to invent a new, low-cost, and faster method of prosthetic socket fabrication, especially in Indonesia. In this paper, the photogrammetry with the 3D printing method is introduced as the new applicative way for transradial prosthetic making. Photogrammetry is used to retrieve a 3D model of the amputated hand stump using a digital camera. A digital camera is used for photogrammetry technique and the resulting 3D model is printed using a circular 3D printer with Polylactic acid (PLA) material. The conventional casting socket fabrication method was also conducted in this study as a comparison. Both prosthetic sockets were analyzed for usability, and sectional area conformities to determine the size deviation using the image processing method. This study concludes that the manufacturing of transradial prosthetic sockets incorporating the photogrammetry technique reduces the total man-hour production. Based on the results, it can be implied that the photogrammetry technique is a more efficient and economical method compared to the conventional casting method. The 3D printed socket resulting from the photogrammetry method has a 5–19% area deviation to the casting socket but it is still preferable and adjustable for the transradial amputee when applied to the stump of the remaining hand.

scholarly journals CT Conversion Workflow for Intraoperative Usage of Bony Models: From DICOM Data to 3D Printed Models

2019 ◽  
Vol 9 (4) ◽  
pp. 708 ◽  
Author(s):  
Francesco Osti ◽  
Gian Santi ◽  
Marco Neri ◽  
Alfredo Liverani ◽  
Leonardo Frizziero ◽  
...  
Keyword(s):  
Open Source Software ◽  
3D Model ◽  
Low Cost ◽  
Poly Lactic Acid ◽  
3D Printer ◽  
Entry Level ◽  
Area Of Interest ◽  
Operative Planning ◽  
3D Printed ◽  
Surgical Field

This paper presents the application of a low-cost 3D printing technology in pre-operative planning and intra-operative decision-making. Starting from Computed Tomography (CT) scans, we were able to reconstruct a 3D model of the area of interest with a very simple and rapid workflow, using open-source software and an entry level 3D printer. The use of High Temperature Poly-Lactic Acid (HTPLA) by ProtoPasta allowed fabricating sterilizable models, which could be used within the surgical field. We believe that our method is an appealing alternative to high-end commercial products, being superior for cost and speed of production. It could be advantageous especially for small and less affluent hospitals that could produce customized sterilizable tools with little investment and high versatility.

scholarly journals Point-of-care 3D printing: a low-cost approach to teaching carotid artery stenting

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Pieter De Backer ◽  
Charlotte Allaeys ◽  
Charlotte Debbaut ◽  
Roel Beelen
Keyword(s):  
Patient Education ◽  
3D Printing ◽  
Carotid Artery ◽  
Carotid Artery Stenting ◽  
3D Model ◽  
Low Cost ◽  
Patient Specific ◽  
Stent Deployment ◽  
Invasive Approach ◽  
3D Printed

Abstract Background Carotid Artery Stenting (CAS) is increasingly being used in selected patients as a minimal invasive approach to carotid endarterectomy. Despite the long standing tradition of endovascular treatments, visual feedback during stent-deployment is impossible to obtain as deployment is performed under fluoroscopic imaging. Furthermore, the concept of stent-placement is often still unclear to patients. 3D Printing allows to replicate patient-specific anatomies and deploy stents inside them to simulate procedures. As such these models are being used for endovascular training as well as patient education. Purpose To our knowledge, this study reports the first use of a low-cost patient-specific 3D printed model for teaching CAS deployment under direct visualization, without fluoroscopy. Methodology A CT-angiogram was segmented and converted to STL format using Mimics inPrint™ software. The carotid arteries were bilaterally truncated to fit the whole model on a Formlabs 2 printer without omitting the internal vessel diameter. Next, this model was offset using a 1 mm margin. A ridge was modelled on the original vessel anatomy which was subsequently subtracted from the offset model in order to obtain a deroofed 3D model. All vessels were truncated to facilitate post-processing, flow and guide wire placement. Results Carotid artery stents were successfully deployed inside the vessel. The deroofing allows for clear visualization of the bottlenecks and characteristics of CAS deployment and positioning, including stent foreshortening, tapering and recoil. This low-cost 3D model provides visual insights in stent deployment and positioning, and can allow for patient-specific procedure planning. Conclusions The presented approach demonstrates the use of low-cost 3D Printed CAS models in teaching complex stent behavior as observed during deployment. Two main findings are illustrated. On one hand, the feasibility of low-cost in-hospital model production is shown. On the other hand, the teaching of CAS deployment bottlenecks at the carotid level without the need for fluoroscopic guidance, is illustrated. The observed stent characteristics as shown during deployment are difficult to assess in radiologic models. Furthermore, printing patient-specific 3D models preoperatively could possibly assist in accurate patient selection, preoperative planning, case-specific training and patient education.

scholarly journals Three-dimensional printing versus conventional machining in the creation of a meatal urethral dilator: a cost and mechanical strength analysis

2020 ◽  
Author(s):  
Michael Yue-Cheng Chen ◽  
Jacob Skewes ◽  
Ryan Daley ◽  
Maria Ann Woodruff ◽  
Nicholas John Rukin
Keyword(s):  
3D Printing ◽  
Low Cost ◽  
Three Dimensional ◽  
Patient Specific ◽  
Strength Analysis ◽  
3D Printer ◽  
Fused Deposition ◽  
3D Printed ◽  
The Cost ◽  
Conventional Machining

Abstract Background Three-dimensional (3D) printing is a promising technology in medicine. Low-cost 3D printing options are accessible but the limitations are often poorly understood. We aim to compare fused deposition modelling (FDM), the most common and low cost 3D printing technique, with selective laser sintering (SLS) and conventional machining techniques in manufacturing meatal urethral dilators which were recently removed from the Australian market.Methods A meatal urethral dilator was designed using computer-aided design (CAD). The dilator was 3D printed vertically orientated on a low cost FDM 3D printer in polylactic acid (PLA) and acrylonitrile butadiene styrene (ABS). It was also 3D printed horizontally orientated in ABS on a high-end FDM 3D printer with soluble support material, as well as on a SLS 3D printer in medical nylon. The dilator was also machined in medical stainless steel using a lathe. All dilators were tested mechanically in a custom rig by hanging calibrated weights from the handle until the dilator snapped.Results The horizontally printed ABS dilator experienced failure at a greater load than the vertically printed PLA and ABS dilators respectively (503g vs 283g vs 163g, p < 0.001). The SLS nylon dilator did not fail but began to bend and deformed at around 5,000g of pressure. The steel dilator did not bend even at 10,000g of pressure. The cost per dilator is highest for the steel dilator if assuming a low quantity of five at 98 USD, but this decreases to 30 USD for a quantity of 1000. In contrast, the cost for the SLS dilator is 33 USD for a quantity of five but relatively unchanged at 27 for a quantity of 1000.Conclusions SLS and conventional machining created clinically functional meatal dilators but low-cost FDM printing could not. We suggest that at the current time 3D printing is not a replacement for conventional manufacturing techniques which are still the most reliable way to produce large quantities of parts with a simple geometry such as the meatal dilator. 3D printing is best used for patient-specific parts, prototyping or manufacturing complex parts that have additional functionality that cannot be achieved with conventional machining methods.

scholarly journals Microstructured Surface Plasmon Resonance Sensor Based on Inkjet 3D Printing Using Photocurable Resins with Tailored Refractive Index

Polymers ◽  
2021 ◽  
Vol 13 (15) ◽  
pp. 2518
Author(s):  
Nunzio Cennamo ◽  
Lorena Saitta ◽  
Claudio Tosto ◽  
Francesco Arcadio ◽  
Luigi Zeni ◽  
...  
Keyword(s):  
Surface Plasmon Resonance ◽  
3D Printing ◽  
Surface Plasmon ◽  
Plasmon Resonance ◽  
Optical Sensor ◽  
Low Cost ◽  
3D Print ◽  
Spr Sensor ◽  
Resonance Sensor ◽  
3D Printed

In this work, a novel approach to realize a plasmonic sensor is presented. The proposed optical sensor device is designed, manufactured, and experimentally tested. Two photo-curable resins are used to 3D print a surface plasmon resonance (SPR) sensor. Both numerical and experimental analyses are presented in the paper. The numerical and experimental results confirm that the 3D printed SPR sensor presents performances, in term of figure of merit (FOM), very similar to other SPR sensors made using plastic optical fibers (POFs). For the 3D printed sensor, the measured FOM is 13.6 versus 13.4 for the SPR-POF configuration. The cost analysis shows that the 3D printed SPR sensor can be manufactured at low cost (∼15 €) that is competitive with traditional sensors. The approach presented here allows to realize an innovative SPR sensor showing low-cost, 3D-printing manufacturing free design and the feasibility to be integrated with other optical devices on the same plastic planar support, thus opening undisclosed future for the optical sensor systems.

Algorithm to Reduce Leading and Lagging in Conformal Direct-Print

2018 ◽  
Vol 140 (10) ◽  
Author(s):  
Morteza Vatani ◽  
Faez Alkadi ◽  
Jae-Won Choi
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
3D Model ◽  
Three Dimensional ◽  
Motion Direction ◽  
B Spline ◽  
And Topology ◽  
Printing System ◽  
3D Printed ◽  
Printed Patterns

A novel additive manufacturing algorithm was developed to increase the consistency of three-dimensional (3D) printed curvilinear or conformal patterns on freeform surfaces. The algorithm dynamically and locally compensates the nozzle location with respect to the pattern geometry, motion direction, and topology of the substrate to minimize lagging or leading during conformal printing. The printing algorithm was implemented in an existing 3D printing system that consists of an extrusion-based dispensing module and an XYZ-stage. A dispensing head is fixed on a Z-axis and moves vertically, while the substrate is installed on an XY-stage and moves in the x–y plane. The printing algorithm approximates the printed pattern using nonuniform rational B-spline (NURBS) curves translated directly from a 3D model. Results showed that the proposed printing algorithm increases the consistency in the width of the printed patterns. It is envisioned that the proposed algorithm can facilitate nonplanar 3D printing using common and commercially available Cartesian-type 3D printing systems.

scholarly journals Accessing 3D Printed Vascular Phantoms for Procedural Simulation

2021 ◽  
Vol 7 ◽  
Author(s):  
Jasamine Coles-Black ◽  
Damien Bolton ◽  
Jason Chuen
Keyword(s):  
3D Printing ◽  
Endovascular Procedures ◽  
Low Cost ◽  
3D Models ◽  
Routine Care ◽  
Aortic Aneurysms ◽  
Patient Specific ◽  
Ct Angiogram ◽  
Abdominal Aortic ◽  
3D Printed

Introduction: 3D printed patient-specific vascular phantoms provide superior anatomical insights for simulating complex endovascular procedures. Currently, lack of exposure to the technology poses a barrier for adoption. We offer an accessible, low-cost guide to producing vascular anatomical models using routine CT angiography, open source software packages and a variety of 3D printing technologies.Methods: Although applicable to all vascular territories, we illustrate our methodology using Abdominal Aortic Aneurysms (AAAs) due to the strong interest in this area. CT aortograms acquired as part of routine care were converted to representative patient-specific 3D models, and then printed using a variety of 3D printing technologies to assess their material suitability as aortic phantoms. Depending on the technology, phantoms cost $20–$1,000 and were produced in 12–48 h. This technique was used to generate hollow 3D printed thoracoabdominal aortas visible under fluoroscopy.Results: 3D printed AAA phantoms were a valuable addition to standard CT angiogram reconstructions in the simulation of complex cases, such as short or very angulated necks, or for positioning fenestrations in juxtarenal aneurysms. Hollow flexible models were particularly useful for device selection and in planning of fenestrated EVAR. In addition, these models have demonstrated utility other settings, such as patient education and engagement, and trainee and anatomical education. Further study is required to establish a material with optimal cost, haptic and fluoroscopic fidelity.Conclusion: We share our experiences and methodology for developing inexpensive 3D printed vascular phantoms which despite material limitations, successfully mimic the procedural challenges encountered during live endovascular surgery. As the technology continues to improve, 3D printed vascular phantoms have the potential to disrupt how endovascular procedures are planned and taught.

scholarly journals Design and implementation of a three dimensions (3D) printer for modeling and pre-manufacturing applications

2019 ◽  
Vol 9 (6) ◽  
pp. 4749
Author(s):  
Ghazi Qaryouti ◽  
Abdel Rahman Salbad ◽  
Sohaib A. Tamimi ◽  
Anwar Almofleh ◽  
Wael A. Salah ◽  
...  
Keyword(s):  
3D Printing ◽  
Manufacturing Sector ◽  
Low Cost ◽  
Three Dimensional ◽  
Three Dimensions ◽  
3D Printer ◽  
Overall Design ◽  
Design And Implementation ◽  
Manufacturing Applications ◽  
Functional Components

The three-dimensional (3D) printing technologies represent a revolution in the manufacturing sector due to their unique characteristics. These printers arecapable to increase the productivitywithlower complexity in addition tothe reduction inmaterial waste as well the overall design cost prior large scalemanufacturing.However, the applications of 3D printing technologies for the manufacture of functional components or devices remain an almost unexplored field due to their high complexity. In this paper the development of 3D printing technologies for the manufacture of functional parts and devices for different applications is presented. The use of 3D printing technologies in these applicationsis widelyused in modelingdevices usually involves expensive materials such as ceramics or compounds. The recent advances in the implementation of 3D printing with the use of environmental friendly materialsin addition to the advantages ofhighperformance and flexibility. The design and implementation of relatively low-cost and efficient 3D printer is presented. The developed prototype was successfully operated with satisfactory operated as shown from the printed samples shown.

A physical investigation of dimensional and mechanical characteristics of 3D printed nut and bolt for industrial applications

2022 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Ramesh Chand ◽  
Vishal S. Sharma ◽  
Rajeev Trehan ◽  
Munish Kumar Gupta
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
3D Printing ◽  
Surface Properties ◽  
3D Printer ◽  
Content Type ◽  
Safety Issues ◽  
Machine Failure ◽  
Sharp Edges ◽  
3D Printed

Purpose A nut bolt joint is a primary device that connects mechanical components. The vibrations cause bolted joints to self-loosen. Created by motors and engines, leading to machine failure, and there may be severe safety issues. All the safety issues and self-loosen are directly and indirectly the functions of the accuracy and precision of the fabricated nut and bolt. Recent advancements in three-dimensional (3D) printing technologies now allow for the production of intricate components. These may be used technologies such as 3D printed bolts to create fasteners. This paper aims to investigate dimensional precision, surface properties, mechanical properties and scanning electron microscope (SEM) of the component fabricated using a multi-jet 3D printer. Design/methodology/approach Multi-jet-based 3D printed nut-bolt is evaluated in this paper. More specifically, liquid polymer-based nut-bolt is fabricated in sections 1, 2 and 3 of the base plate. Five nuts and bolts are fabricated in these three sections. Findings Dimensional inquiry (bolt dimension, general dimensions’ density and surface roughness) and mechanical testing (shear strength of nut and bolt) were carried out throughout the study. According to the ISO 2768 requirements for the General Tolerances Grade, the nut and bolt’s dimensional examination (variation in bolt dimension, general dimensions) is within the tolerance grades. As a result, the multi-jet 3D printing (MJP)-based 3D printer described above may be used for commercial production. In terms of mechanical qualities, when the component placement moves from Sections 1 to 3, the density of the manufactured part decreases by 0.292% (percent) and the shear strength of the nut and bolt decreases by 30%. According to the SEM examination, the density of the River markings, sharp edges, holes and sharp edges increased from Sections 1 to 3, which supports the findings mentioned above. Originality/value Hence, this work enlightens the aspects causing time lag during the 3D printing in MJP. It causes variation in the dimensional deviation, surface properties and mechanical properties of the fabricated part, which needs to be explored.

Controlled Release of Bi-Layered Malvidin Tablets Using 3D Printing Techniques

2021 ◽  
pp. 70-78
Author(s):  
Tejinder Kaur ◽  
Suruchi Singh
Keyword(s):  
Controlled Release ◽  
3D Printing ◽  
Fruits And Vegetables ◽  
Physical And Mechanical Properties ◽  
3D Printer ◽  
Anti Cancer ◽  
Printing Cost ◽  
3D Printed ◽  
Cost Efficient ◽  
3D Printing Technique

Malvidin belongs to the class of anthocyanidin, a pigment compound present in fruits and vegetables like the colored berries, flowers, and vegetables which have pigments on it and it is available commercially as malvidin chloride. Malvidin is known to possess many medicinal characteristics like anti-microbial, anti-diabetic, anti-inflammatory, anti-obesity, and anti-cancer. In this research paper, a 3D printing technique is used which evolves a 3D printer based on desktop that extrudes tablets comprising the active drug which here is malvidin our main ingredient and the other excipients which are used as binders and disintegrants. Methods which are adapted here for the formulation of 3D printed tablet make the tablets appropriate for immediate and sustained release with its definite physical and mechanical properties like hardness, friability, and weight. Tablets that are extruded by the 3D printer are controlled release bi-layer tablets. Due to involvement of 3D printer, printing cost for the bi-layered tablets found very low that makes our method as cost efficient.

History of Additive Manufacturing

2017 ◽  
pp. 1-24 ◽  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Large Scale ◽  
Selective Laser Sintering ◽  
3D Printer ◽  
3D Objects ◽  
History Of ◽  
Pros And Cons ◽  
3D Printed ◽  
The Common

History of additive manufacturing started in the 1980s in Japan. Stereolithography was invented first in 1983. After that tens of other techniques were invented under the common name 3D printing. When stereolithography was invented rapid prototyping did not exists. Tree years later new technique was invented: selective laser sintering (SLS). First commercial SLS was in 1990. At the end of 20t century, first bio-printer was developed. Using bio materials, first kidney was 3D printed. Ten years later, first 3D Printer in the kit was launched to the market. Today we have large scale printers that printed large 3D objects such are cars. 3D printing will be used for printing everything everywhere. List of pros and cons questions rising every day.

Sign in / Sign up

Export Citation Format

Share Document