scholarly journals A Novel Asymmetric Patch Reflectarray Antenna with Ground Ring Slots for 5G Communication Systems

Electronics ◽  
2020 ◽  
Vol 9 (9) ◽  
pp. 1450
Author(s):  
M. Hashim Dahri ◽  
M. Haizal Jamaluddin ◽  
Fauziahanim C. Seman ◽  
Muhammad Inam Abbasi ◽  
Adel Y. I. Ashyap ◽  
...  
Keyword(s):  
Communication Systems ◽  
Ground Plane ◽  
Single Layer ◽  
High Gain ◽  
Circular Ring ◽  
Vertical Side ◽  
Phase Range ◽  
Dual Resonance ◽  
Reflectarray Antenna ◽  
5G Communication

The narrow bandwidth and low gain performances of a reflectarray are generally improved at the cost of high design complexity, which is not a good sign for high-frequency operation. A dual resonance asymmetric patch reflectarray antenna with a single layer is proposed in this work for 5G communication at 26 GHz. The asymmetric patch is developed from a square patch by tilting its one vertical side by a carefully optimized inclination angle. A progressive phase range of 650° is acquired by embedding a circular ring slot in the ground plane of the proposed element for gain improvement. A 332-element, center feed reflectarray is designed and tested, where its high cross polarization is suppressed by mirroring the orientation of asymmetric patches on its surface. The asymmetric patch reflectarray offers a 3 dB gain bandwidth of 3 GHz, which is 4.6% wider than the square patch reflectarray. A maximum measured gain of 24.4 dB has been achieved with an additional feature of dual linear polarization. Simple design with wide bandwidth and high-gain of asymmetric patch reflectarray make it suitable to be used in 5G communications at high frequencies.

scholarly journals Dual resonance element for broadband reflectarray antenna

2019 ◽  
Vol 13 (2) ◽  
pp. 556
Author(s):  
M. Hashim Dahri ◽  
M.R. Kamaruddin ◽  
M.H. Jamaluddin ◽  
M. Inam ◽  
S. Z. N. Zool Ambia ◽  
...  
Keyword(s):  
Communication Systems ◽  
Wide Band ◽  
Unit Cell ◽  
Surface Currents ◽  
Performance Parameters ◽  
Cell Element ◽  
Static Phase ◽  
Phase Range ◽  
Dual Resonance ◽  
Reflectarray Antenna

<span>A dual resonance reflectarray unit cell element has been proposed which evolved from a square patch element to enhance its bandwidth performance. A bend in the width of the element is used to modify its dimensions and surface currents for broadband operation. The results have been analyzed in the frequency band of 24 GHz to 28 GHz. Two different combinations of its dimensions are selected for the investigating of its various performance parameters. A maximum static phase range of 432° and 255° have been obtained with selected dimensions. The wide-band features of proposed unit cell element can be used particularly to design a broadband reflectarray antenna for future fast communication systems.</span>

A wideband, single layer reflectarray antenna with cross loop and square ring slot loaded patch elements

2019 ◽  
Vol 11 (7) ◽  
pp. 703-710 ◽  
Author(s):  
Lingasamy Veluchamy ◽  
Gulam Nabi Alsath Mohammed ◽  
T. Selvan Krishnasamy ◽  
Rajeev Jyoti
Keyword(s):  
Ground Plane ◽  
Single Layer ◽  
Unit Cell ◽  
Operating Frequency ◽  
Geometrical Parameters ◽  
Frequency Range ◽  
Operating Frequency Range ◽  
Cell Element ◽  
Phase Range ◽  
Reflectarray Antenna

AbstractThis paper presents the design and analysis of a wideband X/Ku and Ku band reflectarray antenna. The proposed unit cell of the reflectarray antenna comprises a patch loaded with two distinct slots, viz. a square ring and a cross loop, printed on a low loss substrate, which is backed by a foam-loaded ground plane. The unit cell element offers a linear and large dynamic reflection phase range, which is achieved by optimizing the shape, location, and geometrical parameters of the two slots loaded on the patch. A 324 element microstrip reflectarray antenna of size 200 × 200 mm2 is constructed and analyzed for its radiation characteristics by simulation and measurement. The reflectarray offers a 3 dB gain bandwidth of 50.75% with the operating frequency range of 10–16.8 GHz. It offers a peak gain and aperture efficiency of 25.4 dB and 40% at 12.6 GHz, respectively. The cross-polarization level is below −40 dB over the entire operating frequency range.

scholarly journals A Novel High Gain Monopole Antenna Array for 60 GHz Millimeter-Wave Communications

2020 ◽  
Vol 10 (13) ◽  
pp. 4546
Author(s):  
Tarek S. Mneesy ◽  
Radwa K. Hamad ◽  
Amira I. Zaki ◽  
Wael A. E. Ali
Keyword(s):  
Antenna Array ◽  
Communication Systems ◽  
Ground Plane ◽  
High Gain ◽  
Monopole Antenna ◽  
Impedance Bandwidth ◽  
Single Element ◽  
60 Ghz ◽  
Defected Ground Structure ◽  
Element Array

This paper presented the design and implementation of a 60 GHz single element monopole antenna as well as a two-element array made of two 60 GHz monopole antennas. The proposed antenna array was used for 5G applications with radiation characteristics that conformed to the requirements of wireless communication systems. The proposed single element was designed and optimized to work at 60 GHz with a bandwidth of 6.6 GHz (57.2–63.8 GHz) and a maximum gain of 11.6 dB. The design was optimized by double T-shaped structures that were added in the rectangular slots, as well as two external stubs in order to achieve a highly directed radiation pattern. Moreover, ring and circular slots were made in the partial ground plane at an optimized distance as a defected ground structure (DGS) to improve the impedance bandwidth in the desired band. The two-element array was fed by a feed network, thus improving both the impedance bandwidth and gain. The single element and array were fabricated, and the measured and simulated results mimicked each other in both return loss and antenna gain.

A Single-Layer Low-Profile Broadband Metasurface Antenna Array for Sub-6 GHz 5G Communication Systems

2020 ◽  
pp. 1-1
Author(s):  
J.D Ntawangaheza ◽  
Liguo Sun ◽  
Zipeng Xie ◽  
Yingyang Pang ◽  
Zhuo Zheng ◽  
...  
Keyword(s):  
Antenna Array ◽  
Communication Systems ◽  
Single Layer ◽  
Low Profile ◽  
5G Communication

scholarly journals Miniature Dual-Band Substrate Integrated Waveguide Slotted Antenna Array for Millimeter-Wave 5G Applications

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Fei-Peng Lai ◽  
Lu-Wu Chang ◽  
Yen-Sheng Chen
Keyword(s):  
Antenna Array ◽  
Millimeter Wave ◽  
Communication Systems ◽  
Single Layer ◽  
High Gain ◽  
Dual Band ◽  
Substrate Integrated Waveguide ◽  
Suitable Candidate ◽  
Fifth Generation ◽  
Half Power

A compact substrate integrated waveguide (SIW) antenna array that operates at 28 GHz and 38 GHz is proposed for fifth generation (5G) applications. The proposed array consists of four SIW cavities fabricated on one single layer of substrate. Each cavity implements a rhombic slot and a triangular-split-ring slot, resonating on TE101 and TE102 modes at 28 GHz and 38 GHz, respectively. In comparison with dual-band SIW antennas in the literature, the proposed configuration depicts a miniature footprint (28.7 × 30.8 mm2) without stacking substrates. To excite the four cavities with equal power, a broadband power divider that supports the propagation of TE10 mode is designed. Accordingly, the impedance bandwidths are 26.6–28.3 GHz and 36.8–38.9 GHz. The measured realized peak gain over the lower and higher bands is 9.3–10.9 dBi and 8.7–12.1 dBi, respectively. The measured half-power beam widths (HPBWs) at 28 GHz and 38 GHz are 20.7° and 15.0°, respectively. Considering these characteristics, including dual bands, high gain, narrow beam widths, miniaturization, and single layer, the proposed antenna array is a suitable candidate for millimeter-wave 5G communication systems with the flexibility in switching operating frequency bands against channel quality variations.

scholarly journals Dual Layer Microstrip Refflectarray Composed of Two Stacked Arrays with Minkowski and Square Shaped Radiating Element

2012 ◽  
Vol 58 (1) ◽  
Author(s):  
M. F. Ismail ◽  
A. Wahid ◽  
M. K. A. Rahim ◽  
F. Zubir
Keyword(s):  
Single Layer ◽  
Side Lobe ◽  
Side Lobe Level ◽  
Variable Dimension ◽  
Reflection Phase ◽  
Radiating Element ◽  
Reflector Surface ◽  
Phase Range ◽  
Reflectarray Antenna ◽  
Lower Insertion Loss

A dual layer microstrip reflectarray composed of two stacked arrays with Minkowski and square patches of variable dimension is presented. The reflection phase coefficients on the reflector surface is achieved by tuning the dimensions of the patches. This technique is to broaden the bandwidth and to extend the reflection phase range compare to a conventional single layer reflectarray. From the simulation results of a unit cell composed of two stacked arrays of Minkowski and square patch showed that, 415° reflection phase range is achieved and lower insertion loss which is lower than 0.9 dB. Base on the simulated reflection phase coefficient, a dual layer microstrip reflectarray antenna with Minkowski and square radiating shape elements have been design and model using commercially available computer models of CST Microwave Studio. The reflectarray has been constructed using Taconic RF-35 substrate. From the radiation pattern at 11 GHz frequency, it shows that the HPBW of 4.7º in both plane, a side lobe level (SLL) of –17 dB and a maximum directivity of 26.1 dBi.

scholarly journals Resonant Cavity Antennas for 5G Communication Systems: A Review

Electronics ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 1080 ◽  
Author(s):  
Azita Goudarzi ◽  
Mohammad Mahdi Honari ◽  
Rashid Mirzavand
Keyword(s):  
Wireless Communication ◽  
Communication Systems ◽  
Low Cost ◽  
Resonant Cavity ◽  
Analytical Techniques ◽  
High Gain ◽  
Next Generation ◽  
Antenna Structure ◽  
Single Structure ◽  
5G Communication

Resonant cavity antennas (RCAs) are suitable candidates to achieve high-directivity with a low-cost and easy fabrication process. The stable functionality of the RCAs over different frequency bands, as well as, their pattern reconfigurability make them an attractive antenna structure for the next generation wireless communication systems, i.e., fifth generation (5G). The variety of designs and analytical techniques regarding the main radiator and partially reflective surface (PRS) configurations allow dramatic progress and advances in the area of RCAs. Adding different functionalities in a single structure by using additional layers is another appealing feature of the RCA structures, which has opened the various fields of studies toward 5G applications. This paper reviews the recent advances on the RCAs along with the analytical methods, and various capabilities that make them suitable to be used in 5G communication systems. To discuss different capabilities of RCA structures, some applicable fields of studies are followed in different sections of this paper. To indicate different techniques in achieving various capabilities, some recent state-of-the-art designs are demonstrated and investigated. Since wideband high-gain antennas with different functionalities are highly required for the next generation of wireless communication, the main focus of this paper is to discuss primarily the antenna gain and bandwidth. Finally, a brief conclusion is drawn to have a quick overview of the content of this paper.

Sign in / Sign up

Export Citation Format

Share Document