scholarly journals Development of an Optical Signal-Based IPS from an MCU-SoC

Electronics ◽  
2020 ◽  
Vol 9 (5) ◽  
pp. 782 ◽  
Author(s):  
Borja Rubiano-Muriel ◽  
José Luis Lázaro-Galilea ◽  
Alfredo Gardel-Vicente ◽  
Álvaro De-La-Llana-Calvo ◽  
Ignacio Bravo-Muñoz
Keyword(s):  
Digital Filtering ◽  
Optical Signal ◽  
Point Of View ◽  
Signal Acquisition ◽  
Spectral Processing ◽  
On Chip ◽  
Multi Access ◽  
Signal Acquisition And Processing ◽  
Microcontroller Unit ◽  
Access Discrimination

In this work, we have studied the integration of an optical signal-based Indoor Positioning System (IPS) capable of supporting multi-access discrimination techniques. The research analyzes the different techniques and conditions that can be used to develop an IPS using a microcontroller unit (MCU)-based system-on-chip (SoC) systems. The main goal is to be able to integrate into the MCU both the hardware and software requirements for an IPS detector. In this way, different strategies that can implement multi-access discrimination using Frequency-division multiple access (FDMA) have been tested, such as I/Q demodulation, digital filtering, and discrete Fourier transform (DFT). This analysis has found a good technique to be executed in an MCU-based SoC, the DFT implemented through the Goertzel’s algorithm. The empirical tests carried out concluded that, using only one an MCU with the required HW and tuned SW, 15 position measurements per second were computed, with high accuracy in the 3-D positioning, with errors of less than 1 cm in a test area of 3.5 × 3.5 m 2 . The main contribution of the paper is the implementation of the optical signal based IPS in an MCU-SoC that includes signal acquisition and processing. The digital filtering or spectral processing for up to 16 received signals makes this IPS system very attractive from a design and cost point of view.

A flexible system-on-chip (SoC) for biomedical signal acquisition and processing

2008 ◽  
Vol 142 (1) ◽  
pp. 361-368 ◽  
Author(s):  
N. Van Helleputte ◽  
J.M. Tomasik ◽  
W. Galjan ◽  
A. Mora-Sanchez ◽  
D. Schroeder ◽  
...  
Keyword(s):  
System On Chip ◽  
Signal Acquisition ◽  
Biomedical Signal ◽  
Flexible System ◽  
On Chip ◽  
Signal Acquisition And Processing

scholarly journals The Optical Signal-to-Crosstalk Ratio for the MBA(N, e, g) Switching Fabric †

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1534
Author(s):  
Remigiusz Rajewski
Keyword(s):  
Optical Switching ◽  
Essential Feature ◽  
Optical Signal ◽  
Point Of View ◽  
Signal Quality ◽  
Switching Networks ◽  
Optical Elements ◽  
Optical Signals ◽  
Switching Fabric

The banyan-type switching networks, well known in switching theory and called the logdN switching fabrics, are composed of symmetrical switching elements of size d×d. In turn, the modified baseline architecture, called the MBA(N,e,g), is only partially built from symmetrical optical switching elements, and it is constructed mostly from asymmetrical optical switching elements. Recently, it was shown that the MBA(N,e,g) structure requires a lower number of passive as well as active optical elements than the banyan-type switching fabric of the same capacity and functionality, which makes it an attractive solution. However, the optical signal-to-crosstalk ratio for the MBA(N,e,g) was not investigated before. Therefore, in this paper, the optical signal-to-crosstalk ratio in the MBA(N,e,g) was determined. Such crosstalk influences the output signal’s quality. Thus, if such crosstalk is lower, the signal quality is better. The switching fabric proposed in the author’s previous work has lower optical signal losses than a typical Beneš and banyan-type switching networks of this same capacity and functionality, which gives better quality of transmitted optical signals at the switching node’s output. The investigated MBA(N,e,g) architecture also contains one stage fewer than banyan-type network of the same capacity, which is an essential feature from the optical switching point of view.

scholarly journals Six-port optical switch for cluster-mesh photonic network-on-chip

Nanophotonics ◽  
2018 ◽  
Vol 7 (5) ◽  
pp. 827-835 ◽  
Author(s):  
Hao Jia ◽  
Ting Zhou ◽  
Yunchou Zhao ◽  
Yuhao Xia ◽  
Jincheng Dai ◽  
...  
Keyword(s):  
High Performance ◽  
Optical Switching ◽  
Optical Switch ◽  
Optical Signal ◽  
Network On Chip ◽  
Transmission Experiment ◽  
Photonic Network ◽  
Benes Network ◽  
On Chip ◽  
Spectral Responses

AbstractPhotonic network-on-chip for high-performance multi-core processors has attracted substantial interest in recent years as it offers a systematic method to meet the demand of large bandwidth, low latency and low power dissipation. In this paper we demonstrate a non-blocking six-port optical switch for cluster-mesh photonic network-on-chip. The architecture is constructed by substituting three optical switching units of typical Spanke-Benes network to optical waveguide crossings. Compared with Spanke-Benes network, the number of optical switching units is reduced by 20%, while the connectivity of routing path is maintained. By this way the footprint and power consumption can be reduced at the expense of sacrificing the network latency performance in some cases. The device is realized by 12 thermally tuned silicon Mach-Zehnder optical switching units. Its theoretical spectral responses are evaluated by establishing a numerical model. The experimental spectral responses are also characterized, which indicates that the optical signal-to-noise ratios of the optical switch are larger than 13.5 dB in the wavelength range from 1525 nm to 1565 nm. Data transmission experiment with the data rate of 32 Gbps is implemented for each optical link.

Sign in / Sign up

Export Citation Format

Share Document