scholarly journals Multiterminal Medium Voltage DC Distribution Network Hierarchical Control

Electronics ◽  
2020 ◽  
Vol 9 (3) ◽  
pp. 506 ◽  
Author(s):  
Patrobers Simiyu ◽  
Ai Xin ◽  
Kunyu Wang ◽  
George Adwek ◽  
Salman Salman
Keyword(s):  
Optimal Power Flow ◽  
Distribution Network ◽  
Hierarchical Control ◽  
Active Power ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Dc Voltage ◽  
Medium Voltage ◽  
Control Scheme ◽  
Medium Voltage Dc

In this research study, a multiterminal voltage source converter (VSC) medium voltage DC (MVDC) distribution network hierarchical control scheme is proposed for renewable energy (RE) integration in a co-simulation environment of MATLAB and PSCAD/EMTDC. A DC optimal power flow (DC OPF) secondary controller is created in MATLAB. In PSCAD/EMTDC, the main circuit containing the adaptive DC voltage droop with a dead band and virtual synchronous generator (VSG) based primary controller for the VSCs is implemented. The simulation of the MVDC network under the proposed hierarchical control scheme is investigated considering variations in wind and solar photovoltaic (PV) power. The network is also connected to the standard IEEE-39 bus system and the hierarchical scheme tested by assessing the effect of tripping as well as restoration of the REs. The results show that during random variations in active power such as increasing wind and PV power generation, a sudden reduction or tripping of wind and PV power, the primary controller ensures accurate active power sharing amongst the droop-based VSCs as well as regulates DC voltage deviations within the set range of 0.98–1.02 pu with an enhanced dynamic response. The DC OPF secondary control optimizes the system’s losses by 38% regularly giving optimal droop settings to the primary controllers to ensure proper active power balance and DC voltage stability. This study demonstrates that the hierarchical control strategy is effective for RE integration in the MVDC distribution network.

Modeling and Simulation of Voltage Source Converter–Medium-voltage DC System for Stability Analysis

2011 ◽  
Vol 39 (11) ◽  
pp. 1134-1150 ◽  
Author(s):  
Seetharama Rudraraju ◽  
Suresh C. Srivastava ◽  
Anurag K. Srivastava ◽  
Noel N. Schulz
Keyword(s):  
Stability Analysis ◽  
Modeling And Simulation ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Medium Voltage ◽  
Dc System ◽  
Medium Voltage Dc

Modeling and Simulation of MMC-HVDC Energy System

2014 ◽  
Vol 960-961 ◽  
pp. 1361-1366
Author(s):  
Guang Hao Yang ◽  
You Bing Zhang ◽  
Ji Yun Yu ◽  
Hui Yong Liu
Keyword(s):  
Steady State ◽  
Mathematical Models ◽  
Energy System ◽  
Active Power ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Fundamental Operation ◽  
Dc Voltage ◽  
Hvdc System ◽  
Steady State Performance

In order to study the steady-state performance of modular multilevel voltage source converter (MMC-HVDC), a 21-level MMC-HVDC system is modeled by PSCAD/EMTDC software. This system uses the DC voltage and active power controls, which are designed by the fundamental operation principles and mathematical models of MMC-HVDC. By analyzing the steady-state performance of MMC-HVDC, the corresponding simulation waveforms verify the correctness and validity of the simulation model.

scholarly journals Distribution system power quality compensation using a HSeAPF based on SRF and SMC features

2021 ◽  
Author(s):  
Akram Qashou ◽  
Sufian Yousef ◽  
Abdallah A. Smadi ◽  
Amani A. AlOmari
Keyword(s):  
Power Distribution ◽  
Distribution System ◽  
Reactive Power ◽  
Sliding Mode ◽  
Distribution Network ◽  
Harmonic Distortion ◽  
Phase Locked Loop ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Non Linear

AbstractThe purpose of this paper is to describe the design of a Hybrid Series Active Power Filter (HSeAPF) system to improve the quality of power on three-phase power distribution grids. The system controls are comprise of Pulse Width Modulation (PWM) based on the Synchronous Reference Frame (SRF) theory, and supported by Phase Locked Loop (PLL) for generating the switching pulses to control a Voltage Source Converter (VSC). The DC link voltage is controlled by Non-Linear Sliding Mode Control (SMC) for faster response and to ensure that it is maintained at a constant value. When this voltage is compared with Proportional Integral (PI), then the improvements made can be shown. The function of HSeAPF control is to eliminate voltage fluctuations, voltage swell/sag, and prevent voltage/current harmonics are produced by both non-linear loads and small inverters connected to the distribution network. A digital Phase Locked Loop that generates frequencies and an oscillating phase-locked output signal controls the voltage. The results from the simulation indicate that the HSeAPF can effectively suppress the dynamic and harmonic reactive power compensation system. Also, the distribution network has a low Total Harmonic Distortion (< 5%), demonstrating that the designed system is efficient, which is an essential requirement when it comes to the IEEE-519 and IEC 61,000–3-6 standards.

Adaptive SRF-PLL Based Voltage and Frequency Control of Hybrid Standalone WECS with PMSG-BESS

2018 ◽  
Vol 19 (6) ◽  
Author(s):  
Anjana Jain ◽  
R. Saravanakumar ◽  
S. Shankar ◽  
V. Vanitha
Keyword(s):  
Reactive Power ◽  
Frequency Control ◽  
Storage System ◽  
Synchronous Generator ◽  
Energy Storage System ◽  
Voltage Regulation ◽  
Operating Conditions ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Control Scheme

Abstract The variable-speed Permanent Magnet Synchronous Generator (PMSG) based Wind Energy Conversion System (WECS) attracts the maximum power from wind, but voltage-regulation and frequency-control of the system in standalone operation is a challenging task A modern-control-based-tracking of power from wind for its best utilization is proposed in this paper for standalone PMSG based hybrid-WECS comprising Battery Energy Storage System (BESS). An Adaptive Synchronous Reference Frame Phase-Locked-Loop (SRF-PLL) based control scheme for load side bi-directional voltage source converter (VSC) is presented for the system. MATLAB/Simulink model is developed for simulation study for the proposed system and the effectiveness of the controller for bi-directional-converter is discussed under different operating conditions: like variable wind-velocity, sudden load variation, and load unbalancing. Converter control scheme enhances the power smoothening, supply-load power-matching. Also it is able to regulate the active & reactive power from PMSG-BESS hybrid system with control of fluctuations in voltage & frequency with respect to varying operating conditions. Proposed controller successfully offers reactive-power-compensation, harmonics-reduction, and power-balancing. The proposed scheme is based on proportional & integral (PI) controller. Also system is experimentally validated in the laboratory-environment and results are presented here.

scholarly journals Security-Constrained Day-Ahead Operational Planning for Flexible Hybrid AC/DC Distribution Networks

2019 ◽  
Vol 9 (21) ◽  
pp. 4685 ◽  
Author(s):  
Ahmad Asrul Ibrahim ◽  
Behzad Kazemtabrizi ◽  
Javier Renedo
Keyword(s):  
Distributed Generation ◽  
Optimal Power Flow ◽  
Distribution Network ◽  
Distribution Networks ◽  
Operational Planning ◽  
Hybrid Network ◽  
Management Framework ◽  
Medium Voltage ◽  
Operational Costs ◽  
Network Losses

A new active network management framework is presented based on a multi-period optimal power flow problem that is bounded by security constraints at the distribution level for upholding the security of supply. This can be achieved through active engagement with flexible demand and distributed generation to prepare for contingency events in day-ahead operational planning. This framework is coupled with a flexible hybrid AC/DC medium voltage (MV) distribution network topology. It contains an integrated multi-terminal medium voltage DC (MVDC) interface for a seamless interaction and integration of the flexible demand and generation on both AC and DC sides of the hybrid network. The active energy management framework when coupled with a flexible hybrid AC/DC topology provides unprecedented degrees of flexibility as well as security of operation under a variety of conditions. To this end, the 75-bus UK generic distribution network has been modified and converted into a hybrid AC/DC network using the integrated MVDC interface. This framework is then deployed to minimise operational costs to the network operator, considering costs of schemes such as distributed generation curtailment and flexible demand shifting, as well as network losses. Results show a significant improvement in operational costs when the network operates as a flexible hybrid when compared to a pure AC or a more conventional AC/DC hybrid.

scholarly journals Modeling and Analyzing the Effect of Frequency Variation on Weak Grid-Connected VSC System Stability in DC Voltage Control Timescale

Energies ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 4458 ◽  
Author(s):  
Yang ◽  
Yuan
Keyword(s):  
Voltage Control ◽  
System Stability ◽  
Voltage Source ◽  
Frequency Variation ◽  
Voltage Source Converter ◽  
Small Signal ◽  
Small Signal Stability ◽  
Dc Voltage ◽  
Weak Grid ◽  
Dc Voltage Control

The effect of frequency variation on system stability becomes crucial when a voltage source converter (VSC) is connected to a weak grid. However, previous studies lack enough mechanism cognitions of this effect, especially on the stability issues in DC voltage control (DVC) timescale (around 100 ms). Hence, this paper presented a thorough analysis of the effect mechanism of frequency variation on the weak grid-connected VSC system stability in a DVC timescale. Firstly, based on instantaneous power theory, a novel method in which the active/reactive powers are calculated with the time-varying frequency of voltage vectors was proposed. This method could intuitively reflect the effect of frequency variation on the active/reactive powers and could also help reduce the system order to a certain extent. Then, a small-signal model was established based on the motion equation concept, to depict the effect of frequency variation on the weak grid-connected VSC system dynamics. Furthermore, an analytical method was utilized to quantify the effect of frequency variation on the system’s small-signal stability. The quantitative analysis considered the interactions between the DC voltage control, the terminal voltage control, phase-locked loop, and the power network. Finally, case studies were conducted, and simulation results supported the analytical analyses.

Sign in / Sign up

Export Citation Format

Share Document