scholarly journals Effective Position Control for a Three-Phase Motor

Electronics ◽  
2020 ◽  
Vol 9 (2) ◽  
pp. 241 ◽  
Author(s):  
Patxi Alkorta ◽  
Oscar Barambones ◽  
José Cortajarena ◽  
Itziar Martija ◽  
Fco. Maseda
Keyword(s):  
Frequency Domain ◽  
Position Control ◽  
Permanent Magnet Synchronous Motor ◽  
Experimental Tests ◽  
Research Area ◽  
Load Disturbance ◽  
Three Phase ◽  
Position Controller ◽  
Incremental Encoder ◽  
Favorable Conditions

This document presents an efficient proportional derivative (PD) position controller for three-phase motor drives. The regulator has been designed in frequency domain, employing the direct–quadrature (d–q) synchronous rotating reference frame and the indirect vector control. The presented position regulator is easy to tune and incorporates a feed forward (FF) term to compensate effectively the effect of the load disturbance. This position controller has been validated experimentally by using two industrial three-phase motors: an induction motor (IM) of 7.5 kW and a permanent magnet synchronous motor (PMSM) of 3.83 kW. The inner proportional integral (PI) current loops of both machines have also been designed in the frequency domain. Each machine has connected in its shaft an incremental encoder of 4096 pulses per revolution, to measure the position. Several simulations and experimental tests have been carried out with both motors, in favorable conditions and also with various types of adversities (parametric uncertainties, unknown load disturbance and measurement noise in the position and current loops), getting very good results and suggesting that this controller could be used in the research area and also in the industry.

scholarly journals Design and Experimental Evaluation of a Robust Position Controller for an Electrohydrostatic Actuator Using Adaptive Antiwindup Sliding Mode Scheme

2013 ◽  
Vol 2013 ◽  
pp. 1-16 ◽  
Author(s):  
Ji Min Lee ◽  
Sung Hwan Park ◽  
Jong Shik Kim
Keyword(s):  
Control Systems ◽  
Pid Controller ◽  
Position Control ◽  
Sliding Mode ◽  
System Modeling ◽  
Modeling Error ◽  
Load Disturbance ◽  
Control Scheme ◽  
Position Controller ◽  
System Uncertainties

A robust control scheme is proposed for the position control of the electrohydrostatic actuator (EHA) when considering hardware saturation, load disturbance, and lumped system uncertainties and nonlinearities. To reduce overshoot due to a saturation of electric motor and to realize robustness against load disturbance and lumped system uncertainties such as varying parameters and modeling error, this paper proposes an adaptive antiwindup PID sliding mode scheme as a robust position controller for the EHA system. An optimal PID controller and an optimal anti-windup PID controller are also designed to compare control performance. An EHA prototype is developed, carrying out system modeling and parameter identification in designing the position controller. The simply identified linear model serves as the basis for the design of the position controllers, while the robustness of the control systems is compared by experiments. The adaptive anti-windup PID sliding mode controller has been found to have the desired performance and become robust against hardware saturation, load disturbance, and lumped system uncertainties and nonlinearities.

scholarly journals Experimental Assessment of Fractional-Order PDD1/2 Control of a Brushless DC Motor with Inertial Load

Actuators ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 13
Author(s):  
Luca Bruzzone ◽  
Pietro Fanghella ◽  
Mario Baggetta
Keyword(s):  
Fractional Order ◽  
Position Control ◽  
Experimental Tests ◽  
Research Area ◽  
Digital Implementation ◽  
Integer Order ◽  
Brushless Dc ◽  
Brushless Motor ◽  
Control Schemes ◽  
Derivative Term

The application of Fractional Calculus to control mechatronic devices is a promising research area. The most common approach to Fractional-Order (FO) control design is the PIλDµ scheme, which adopts integrals and derivatives of non-integer order λ and µ. A different possible approach is to add FO terms to the PID control, instead of replacing integer order terms; for example, in the PDD1/2 scheme, the half-derivative term is added to the classical PD. In the present paper, by mainly focusing on the transitory behaviour, a comparison among PD, PDµ, and PDD1/2 control schemes is carried out, with reference to a real-world mechatronic implementation: a position-controlled rotor actuated by a DC brushless motor. While using a general non-dimensional approach, the three control schemes are first compared by continuous-time simulations, and tuning criteria are outlined. Afterwards, the effects of the discrete-time digital implementation of the controllers are investigated by both simulation and experimental tests. The results show how PDD1/2 is an effective and almost cost-free solution for improving the trajectory-tracking performance in position control of mechatronic devices, with limited computational burden and, consequently, easily implementable on most commercial motion control drives.

Robust Two-degree-of-freedom Control Based on H∞ Method for PMSM Drive System

2020 ◽  
Vol 13 (4) ◽  
pp. 496-506
Author(s):  
Qixin Zhu ◽  
Lei Xiong ◽  
Hongli Liu ◽  
Yonghong Zhu ◽  
Guoping Zhang
Keyword(s):  
Control System ◽  
Control Theory ◽  
Position Control ◽  
Dynamic Performance ◽  
Servo System ◽  
Degree Of Freedom ◽  
Trade Off ◽  
Standard Design ◽  
Position Controller ◽  
Two Degree Of Freedom

Background: The conventional method using one-degree-of-freedom (1DOF) controller for Permanent Magnet Synchronous Motor (PMSM) servo system has the trade-off problem between the dynamic performance and the robustness. Methods: In this paper, by using H∞ control theory, a novel robust two-degree-of-freedom (2DOF) controller has been proposed to improve the position control performance of PMSM servo system. Using robust control theory and 2DOF control theory, a H∞ robust position controller has been designed and discussed in detail. Results: The trade-off problem between the dynamic performance and robustness which exists in one-degree-of-freedom (1DOF) control can be dealt with by the application of 2DOF control theory. Then, through H∞ control theory, the design of robust position controller can be translated to H∞ robust standard design problem. Moreover, the control system with robust controller has been proved to be stable. Conclusion: Further simulation results demonstrate that compared with the conventional PID control, the designed control system has better robustness and attenuation to the disturbance of load impact.

Improved ANFIS based MRAC observer for sensorless control of PMSM

2021 ◽  
pp. 1-13
Author(s):  
Suryakant ◽  
Mini Sreejeth ◽  
Madhusudan Singh
Keyword(s):  
Fuzzy Inference ◽  
Permanent Magnet Synchronous Motor ◽  
Torque Control ◽  
Control Algorithms ◽  
Motor Speed ◽  
Inference System ◽  
Rotor Position ◽  
Improved Performance ◽  
Incremental Encoder ◽  
Model Reference Adaptive

Detection of the rotor position is an important prerequisite for controlling the speed and developed torque in permanent magnet synchronous motor (PMSM). Even though use of incremental encoder and resolver is one of the popular schemes for sensing the rotor position in a PMSM drive, it increases the size and weight of the drive and reduces its reliability. Dynamic modeling of the motor and control algorithms are often used in sensor-less control of PMSM to estimate rotor position and motor speed. Most sensor-less control algorithms use machine parameters like torque constant, stator inductances and stator resistance for estimating the rotor position and speed. However, with accuracy of such estimation and the performance of the motor degrades with variation in motor parameters. Model reference adaptive control (MRAC) provides a simple solution to this issue. An improved Adaptive neuro-fuzzy inference system (ANFIS) based MRAC observer for speed control of PMSM drive is presented in this paper. In the proposed method adaptive model and adaptive mechanism are replaced by an improved ANFIS controller, which neutralize the effect of parametric variation and results in improved performance of the drive. The modeling equations of PMSM are used to estimate the rotor position for speed and torque control of the drive. Simulation studies have been carried out under various operating condition using MATLAB/Simulink. In addition, a comparative analysis of the conventional MRAC based observer and improved ANFIS based MRAC observer is carried out. It is observed that the proposed method results in better performance of the PMSM drive.

scholarly journals A phase-locked loop using ESO-based loop filter for grid-connected converter: performance analysis

2021 ◽  
Author(s):  
Baoling Guo ◽  
Seddik Bacha ◽  
Mazen Alamir ◽  
Julien Pouget
Keyword(s):  
Performance Analysis ◽  
Frequency Domain ◽  
Low Frequency ◽  
Experimental Tests ◽  
Frequency Measurement ◽  
Phase Locked Loop ◽  
Frequency Domain Analysis ◽  
Loop Filter ◽  
Control Stability ◽  
Unbalanced Grid

AbstractAn extended state observer (ESO)-based loop filter is designed for the phase-locked loop (PLL) involved in a disturbed grid-connected converter (GcC). This ESO-based design enhances the performances and robustness of the PLL, and, therefore, improves control performances of the disturbed GcCs. Besides, the ESO-based LF can be applied to PLLs with extra filters for abnormal grid conditions. The unbalanced grid is particularly taken into account for the performance analysis. A tuning approach based on the well-designed PI controller is discussed, which results in a fair comparison with conventional PI-type PLLs. The frequency domain properties are quantitatively analysed with respect to the control stability and the noises rejection. The frequency domain analysis and simulation results suggest that the performances of the generated ESO-based controllers are comparable to those of the PI control at low frequency, while have better ability to attenuate high-frequency measurement noises. The phase margin decreases slightly, but remains acceptable. Finally, experimental tests are conducted with a hybrid power hardware-in-the-loop benchmark, in which balanced/unbalanced cases are both explored. The obtained results prove the effectiveness of ESO-based PLLs when applied to the disturbed GcC.

scholarly journals AC Current Ripple in Three-Phase Four-Leg PWM Converters with Neutral Line Inductor

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1430
Author(s):  
Aleksandr Viatkin ◽  
Riccardo Mandrioli ◽  
Manel Hammami ◽  
Mattia Ricco ◽  
Gabriele Grandi
Keyword(s):  
Numerical Simulations ◽  
Pulse Width Modulation ◽  
Neutral Line ◽  
Experimental Tests ◽  
Performance Comparison ◽  
Design Parameters ◽  
Switching Frequency ◽  
Three Phase ◽  
Ac Current ◽  
Current Ripple

This paper presents a comprehensive study of peak-to-peak and root-mean-square (RMS) values of AC current ripples with balanced and unbalanced fundamental currents in a generic case of three-phase four-leg converters with uncoupled AC interface inductors present in all three phases and in neutral. The AC current ripple characteristics were determined for both phase and neutral currents, considering the sinusoidal pulse-width modulation (SPWM) method. The derived expressions are simple, effective, and ready for accurate AC current ripple calculations in three- or four-leg converters. This is particularly handy in the converter design process, since there is no need for heavy numerical simulations to determine an optimal set of design parameters, such as switching frequency and line inductances, based on the grid code or load restrictions in terms of AC current ripple. Particular attention has been paid to the performance comparison between the conventional three-phase three-leg converter and its four-leg counterpart, with distinct line inductance values in the neutral wire. In addition to that, a design example was performed to demonstrate the power of the derived equations. Numerical simulations and extensive experimental tests were thoroughly verified the analytical developments.

scholarly journals Analysis of Three-Phase Wye-Delta Connected LLC

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3606
Author(s):  
Jing-Yuan Lin ◽  
Chuan-Ting Chen ◽  
Kuan-Hung Chen ◽  
Yi-Feng Lin
Keyword(s):  
Frequency Domain ◽  
Time Domain ◽  
Operation Time ◽  
Time Domain Analysis ◽  
Domain Analysis ◽  
Frequency Domain Analysis ◽  
Complete Analysis ◽  
Plane Analysis ◽  
Analysis Methods ◽  
Three Phase

Three-phase wye–delta LLC topology is suitable for voltage step down and high output current, and has been used in the industry for some time, e.g., for server power and EV charger. However, no comprehensive circuit analysis has been performed for three-phase wye–delta LLC. This paper provides complete analysis methods for three-phase wye–delta LLC. The analysis methods include circuit operation, time domain analysis, frequency domain analysis, and state–plane analysis. Circuit operation helps determine the circuit composition and operation sequence. Time domain analysis helps understand the detail operation, equivalent circuit model, and circuit equation. Frequency domain analysis helps obtain the curve of the transfer function and assists in circuit design. State–plane analysis is used for optimal trajectory control (OTC). These analyses not only can calculate the voltage/current stress, but can also help design three-phase wye-delta connected LLC and provide the OTC control reference. In addition, this paper uses PSIM simulation to verify the correctness of analysis. At the end, a 5-kW three-phase wye–delta LLC prototype is realized. The specification of the prototype is a DC input voltage of 380 V and output voltage/current of 48 V/105 A. The peak efficiency is 96.57%.

Sign in / Sign up

Export Citation Format

Share Document