scholarly journals Design and Development of MIMO Antennas for WiGig Terminals

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1548 ◽  
Author(s):  
Sultan Shoaib ◽  
Nosherwan Shoaib ◽  
Riqza Y. Y. Khattak ◽  
Imran Shoaib ◽  
Masood Ur Rehman ◽  
...  
Keyword(s):  
Dielectric Loss ◽  
Impedance Matching ◽  
High Gain ◽  
Frequency Bandwidth ◽  
Wide Bandwidth ◽  
Mimo Antennas ◽  
Average Value ◽  
Microstrip Lines ◽  
Ieee 802.11Ad ◽  
Compact Geometry

This article presents a design for high-gain MIMO antennas with compact geometry. The proposed design is composed of four antennas in MIMO configuration, wherein, each antenna is made up of small units of microstrip patches. The overall geometry is printed on the top layer of the substrate, i.e., Rogers RT-5880 with permittivity of 2.2, permeability of 1.0, dielectric loss of 0.0009, and depth of 0.508 mm. The proposed design covers an area of 29.5 × 61.4 mm2, wherein each antenna covers an area of 11.82 × 25.28 mm2. The dimensions of the microstrip lines in each MIMO element were optimized to achieve a good impedance matching. The design is resonating at 61 GHz, with a wide practical bandwidth of more than 7 GHz, thereby covering IEEE 802.11ad WiGig (58–65 GHz). The average value of gain ranges from 9.45 to 13.6 dBi over the entire frequency bandwidth whereas, the average value of efficiency ranges from 55.5% to 84.3%. The proposed design attains a compact volume, wide bandwidth, and good gain and efficiency performances, which makes it suitable for WiGig terminals.

scholarly journals Wideband Dual-Polarized VHF Antenna for Space Observation Applications

Sensors ◽  
2020 ◽  
Vol 20 (15) ◽  
pp. 4351
Author(s):  
Alexandru Tatomirescu ◽  
Alina Badescu
Keyword(s):  
Radiation Pattern ◽  
Group Delay ◽  
High Gain ◽  
Antenna Element ◽  
Frequency Bandwidth ◽  
Radio Emissions ◽  
Relative Bandwidth ◽  
Pattern Stability ◽  
Dual Polarized ◽  
Delay Variation

This work presents the design for an antenna element that can be used in radio arrays for the monitoring and detecting of radio emissions from cosmic particles’ interactions in the atmosphere. For these applications, the pattern stability over frequency is the primary design goal. The proposed antenna has a high gain over a relative bandwidth of 88%, a beamwidth of 2.13 steradians, a small group delay variation and a very stable radiation pattern across the frequency bandwidth of 110 to 190 MHz. It is dual polarized and has a simple mechanical structure which is easy and inexpensive to manufacture. The measurements show that the ground has insignificant impact on the overall radiation pattern.

Coplanar waveguide-fed ISM band implantable crossed-type triangular slot antenna for biomedical applications

2013 ◽  
Vol 6 (2) ◽  
pp. 167-172 ◽  
Author(s):  
Srinivasan Ashok Kumar ◽  
Thangavelu Shanmuganantham
Keyword(s):  
Biomedical Applications ◽  
Biomedical Application ◽  
Coplanar Waveguide ◽  
Impedance Matching ◽  
High Gain ◽  
Slot Antenna ◽  
Center Frequency ◽  
Ism Band ◽  
High Data ◽  
Implantable Antenna

A novel coplanar waveguide fed Industrial, Scientific, and Medical (ISM) band implantable crossed-type triangular slot antenna is proposed for biomedical applications. The antenna operates at the center frequency of 2450 MHz, which is in ISM band, to support GHz wideband communication for high-data rate implantable biomedical application. The size of the antenna is 78 mm3 (10 mm × 12 mm × 0.65 mm). The simulated and measured bandwidths are 7.9 and 8.2% at the resonant frequency of 2.45 GHz. The specific absorption rate distribution induced by the implantable antenna inside a human body tissue model is evaluated. The communication between the implanted antenna and external device is also examined. The proposed antenna has substantial merits such as miniaturization, lower return loss, better impedance matching, and high gain over other implanted antennas.

Design of a high-gain dual-band antipodal Vivaldi antenna array for 5G communications

2021 ◽  
pp. 1-9
Author(s):  
Sumit Kumar ◽  
Amruta S. Dixit
Keyword(s):  
Frequency Spectrum ◽  
Impedance Matching ◽  
High Gain ◽  
Dual Band ◽  
Dual Frequency ◽  
Band Frequency ◽  
Dielectric Lens ◽  
Bottom Side ◽  
Simulation Results ◽  
Vivaldi Antenna

Abstract This paper presents a dual-band 1 × 4 antipodal Vivaldi antenna (AVA) array with high gain to operate over a dual-frequency band that covers the 5G frequency spectrum. The gain is enhanced by employing a dielectric lens (DL). The AVA array consists of four radiating patch elements, corrugations, DL, and array feeding network on the top side. The bottom side contains four radiating patches which are the mirror images of top radiating patches. The designed AVA contains 1 × 4 array antenna elements with a DL that is operating in the ranges of 24.59–24.98 and 27.06–29 GHz. The dimensions of the designed antenna are 97.2 mm × 71.2 mm × 0.8 mm. For the improvement in gain and impedance matching at the dual-band frequency, corrugation and feeding network techniques are used. The gain obtained is about 8–12 dBi. AVA array is tested after fabrication and the measured results are reliable with the simulation results.

scholarly journals ULTRA WIDE BANDWIDTH HIGH GAIN VIVALDI ANTENNA FOR WIRELESS COMMUNICATIONS

2017 ◽  
Vol 69 ◽  
pp. 105-111 ◽  
Author(s):  
Dalia Mohammed Nasha Elsheakh ◽  
Nermeen A. Eltresy ◽  
Esmat Abdallah Abdel Fattah
Keyword(s):  
Wireless Communications ◽  
High Gain ◽  
Wide Bandwidth ◽  
Vivaldi Antenna
Sign in / Sign up

Export Citation Format

Share Document