scholarly journals Power Supply Switch Circuit for Intermittent Energy Harvesting

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1446 ◽  
Author(s):  
Hyun Jun Jung ◽  
Saman Nezami ◽  
Soobum Lee
Keyword(s):  
Energy Harvesting ◽  
Power Management ◽  
Power Supply ◽  
High Efficiency ◽  
Operation Mode ◽  
Vibration Energy ◽  
Storage Device ◽  
Sleep Mode ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester

Energy harvesters generate power only when ambient energy is available, and power loss is significant when the harvester does not produce energy and its power management circuit is still turned on. This paper proposes a new high-efficiency power management circuit for intermittent vibration energy harvesting. The proposed circuit is unique in terms of autonomous power supply switch between harvester and storage device (battery), as well as self-start and control of the operation mode (between active and sleep modes). The self-start controller saves power during an inactive period and the impedance matching concept enables maximum power transfer to the storage device. The proposed circuit is prototyped and tested with an intermittent vibration energy harvester. Test results found that the daily energy consumption of the proposed circuit is smaller than that of the resistive matching circuit: 0.75 J less in sleep mode and 0.04 J less in active mode with self-start.

scholarly journals A Vibration Energy Harvester and Power Management Solution for Battery-Free Operation of Wireless Sensor Nodes

Sensors ◽  
2019 ◽  
Vol 19 (17) ◽  
pp. 3776 ◽  
Author(s):  
Juan Carlos Rodriguez ◽  
Valeria Nico ◽  
Jeff Punch
Keyword(s):  
Energy Harvesting ◽  
Power Management ◽  
Electrical Power ◽  
Sensor Nodes ◽  
Wireless Sensor ◽  
Vibration Energy ◽  
Attractive Alternative ◽  
Vibration Energy Harvesting ◽  
Wireless Sensor Nodes ◽  
Vibration Energy Harvester

Electromagnetic Vibration Energy Harvesting (EM-VEH) is an attractive alternative to batteries as a power source for wireless sensor nodes that enable intelligence at the edge of the Internet of Things (IoT). Industrial environments in particular offer an abundance of available kinetic energy, in the form of machinery vibrations that can be converted into electrical power through energy harvesting techniques. These ambient vibrations are generally broadband, and multi-modal harvesting configurations can be exploited to improve the mechanical-to-electrical energy conversion. However, the additional challenge of energy conditioning (AC-to-DC conversion) to make the harvested energy useful brings into question what specific type of performance is to be expected in a real industrial application. This paper reports the operation of two practical IoT sensor nodes, continuously powered by the vibrations of a standard industrial compressor, using a multi-modal EM-VEH device, integrated with customised power management. The results show that the device and the power management circuit provide sufficient energy to receive and transmit data at intervals of less than one minute with an overall efficiency of about 30%. Descriptions of the system, test-bench, and the measured outcomes are presented.

scholarly journals A Theory for Energy-Optimized Operation of Self-Adaptive Vibration Energy Harvesting Systems with Passive Frequency Adjustment

Micromachines ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 44 ◽  
Author(s):  
Mario Mösch ◽  
Gerhard Fischerauer
Keyword(s):  
Energy Harvesting ◽  
Resonance Frequency ◽  
Optimal Operation ◽  
Energy Output ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Frequency Adjustment ◽  
Harvesting Systems ◽  
Self Adaptive

Self-adaptive vibration energy harvesting systems vary their resonance frequency automatically to better exploit changing environmental conditions. The energy required for the adjustment is taken from the energy storage of the harvester module. The energy gained by an adjustment step has to exceed the energy expended on it to justify the adjustment. A smart self-adaptive system takes this into account and operates in a manner that maximizes the energy output. This paper presents a theory for the optimal operation of a vibration energy harvester with a passive resonance-frequency adjustment mechanism (one that only requires energy for the adjustment steps proper, but not during the hold phases between the steps). Several vibration scenarios are considered to derive a general guideline. It is shown that there exist conditions under which a narrowing of the adjustment bandwidth improves the system characteristics. The theory is applied to a self-adaptive energy harvesting system based on electromagnetic transduction with narrowband resonators. It is demonstrated that the novel optimum mode of operation increases the energy output by a factor of 3.6.

Energy Harvesting Performance of Vertically Staggered Rectangle-Through-Holes Cantilever in Piezoelectric Vibration Energy Harvester

2020 ◽  
Vol 142 (10) ◽  
Author(s):  
Shan Gao ◽  
Hongrui Ao ◽  
Hongyuan Jiang
Keyword(s):  
Energy Harvesting ◽  
Integrated Circuits ◽  
Resonant Frequency ◽  
Power Density ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Cantilevered Beam ◽  
Piezoelectric Vibration

Abstract Piezoelectric vibration energy harvesting technology has attracted significant attention for its applications in integrated circuits, microelectronic devices, and wireless sensors due to high power density, easy integration, simple configuration, and other outstanding features. Among piezoelectric vibration energy harvesting structures, the cantilevered beam is one of the simplest and most commonly used structures. In this work, a vertically staggered rectangle-through-holes (VS-RTH) cantilevered model is proposed, which focuses on the multi-directional vibration collection. To verify the output performance of the device, this paper employs basic materials and fabrication methods with mathematical modeling. The simulations are conducted through finite element methods to discuss the properties of VS-RTH energy harvester on resonant frequency and output characteristics. Besides, an energy storage circuit is adopted as a collection system. It can achieve a maximum voltage of 4.5 V which is responded to the harmonic vibrating input of 1 N force and 1 m/s2 in a single vibrating direction. Moreover, the power density is 2.596 W/cm3 with a 100 kΩ resistor. It is almost four times better than the output of unidirectional cantilever beam with similar resonant frequency and volume. According to the more functionality in the applications, VS-RTH energy harvester can be used in general vibration acquisition of machines and vehicles. Except for electricity storage, the harvester can potentially employ as a sensor to monitor the diversified physical signals for smooth operation and emergence reports. Looking forward, the VS-RTH harvester renders an effective approach toward decomposing the vibration directions in the environment for further complicating vibration applications.

Energy Harvesting Performance of Vertically Staggered Rectangle-Through-Holes Cantilevered in Piezoelectric Vibration Energy Harvester

2019 ◽  
Author(s):  
Shan Gao ◽  
Hongrui Ao ◽  
Hongyuan Jiang
Keyword(s):  
Energy Harvesting ◽  
Integrated Circuits ◽  
Resonant Frequency ◽  
High Power ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Piezoelectric Energy ◽  
Piezoelectric Vibration

Abstract Piezoelectric vibration energy harvesting technology has attracted significant attention for its applications in integrated circuits, microelectronic devices and wireless sensors due to high power density, easy integration, simple configuration and other outstanding features. Among piezoelectric vibration energy harvesting structures, cantilevered beam is one of the simplest and most commonly used structures. In this work, a vertically staggered rectangle-through-holes (VS-RTH) cantilevered model of mesoscale piezoelectric energy harvester is proposed, which focuses on the multi-directional vibration collection and low resonant frequency. To verify the output performances of the device, this paper employs basic materials and fabrication methods with mathematical modeling. The simulations are conducted through finite element methods to discuss the properties of VS-RTH energy harvester on resonant frequency and output characteristics. Besides, an energy storage circuit with high power collection rate is adopted as collection system. This harvester is beneficial to the further application of devices working with continuous vibrations and low power requirements.

scholarly journals Soft and Hard Piezoelectric Ceramics for Vibration Energy Harvesting

Crystals ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 907
Author(s):  
Xiaodong Yan ◽  
Mupeng Zheng ◽  
Mankang Zhu ◽  
Yudong Hou
Keyword(s):  
Power Generation ◽  
Energy Harvesting ◽  
Lead Zirconate Titanate ◽  
Energy Harvester ◽  
Piezoelectric Materials ◽  
Lead Zirconate ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Low Frequencies ◽  
Vibration Energy Harvester

The question as to which piezoelectric composition is favorable for energy harvesting has been addressed in the past few years. However, discussion on this topic continues. In this work, an answer is provided through a feasible method which can be used in selecting piezoelectric material. The energy harvesting behavior of hard (P4 and P8) and soft (P5 and P5H) lead zirconate titanate (PZT) ceramics was investigated. The results show that the maximum piezoelectric voltage coefficient g33 and transduction coefficient d33 × g33 were obtained in P5 ceramic. Meanwhile, the power generation characteristics at low frequencies were compared by the vibration energy harvester with a cantilever beam structure. The results indicate that the energy harvester fabricated by the P5 ceramic with the maximum d33 × g33 values also demonstrated the best power generation characteristics. The results unambiguously demonstrate that the power density and energy conversion efficiency of the energy harvesting devices are dominated by the d33 × g33 value of the piezoelectric materials.

A Broadband Frequency Piezoelectric Vibration Energy Harvester

2011 ◽  
Vol 483 ◽  
pp. 626-630 ◽  
Author(s):  
Hua An Ma ◽  
Jing Quan Liu ◽  
Gang Tang ◽  
Chun Sheng Yang ◽  
Yi Gui Li ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Frequency Band ◽  
Energy Harvester ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Piezoelectric Cantilever ◽  
Working Frequency ◽  
Piezoelectric Vibration Energy Harvester ◽  
Piezoelectric Vibration

As the low-power wireless sensor components and the development of micro electromechanical systems, long-term supply of components is a major obstacle of their development. One of solutions to this problem is based on the environmental energy collection of piezoelectric vibration energy harvesting. Currently, frequency band of piezoelectric vibration energy harvester is narrow and the frequency is high, which is not fit for the vibration energy acquisition in the natural environment. A piezoelectric vibration energy harvester with lower working frequency and broader band is designed and a test system to analyze the harvester is presented in this paper. The traditional mass is replaced by a permanent magnet in this paper, While other two permanent magnets are also placed on the upper and above of the piezoelectric cantilever. Experiments showed, under the 0.5g acceleration, compared with the traditional non-magnetic piezoelectric vibration energy harvesting, a piezoelectric cantilever (length 40mm, width 8mm, thickness 0.8mm) has a peak-peak voltage of 32.4V, effectively enlarges working frequency band from 67HZ-105HZ to 63HZ-108HZ.

Endurance Testing of a Vibration Energy Harvester for Structural Health Monitoring

2014 ◽  
Vol 891-892 ◽  
pp. 1261-1267 ◽  
Author(s):  
Genevieve A. Hart ◽  
Scott D. Moss ◽  
Dylan J. Nagle ◽  
Steve C. Galea
Keyword(s):  
Structural Health Monitoring ◽  
Energy Harvesting ◽  
Health Monitoring ◽  
Life Support ◽  
Vibration Energy ◽  
Vibration Energy Harvesting ◽  
Vibration Energy Harvester ◽  
Structural Health ◽  
Energy Harvesting Devices

The Australian Defence Science and Technology Organisation (DSTO) is developing a variety of in-situ structural health monitoring (SHM) approaches for potential use in high value platforms across the Australian Defence Force (ADF). The implementation of SHM systems would allow the ADF to move from expensive interval based inspection and maintenance regimes for ageing platforms to more cost-effective condition-based approaches, and therefore reduce aircraft through - life support costs. One critical issue is determining the optimal means of supplying power to these in-situ SHM systems. To address this issue DSTO has developed a bi-axial vibration energy harvesting approach based on a vibrating spherical-mass, magnet and wire-coil transducer arrangement. It is important that the vibration energy harvesting devices themselves are resistant to fatigue and wear related damage as they may need to operate in service for many years. This paper examines work done on mitigating wear effects in vibration energy harvesting devices, with the goal of ensuring device longevity.

Sign in / Sign up

Export Citation Format

Share Document