scholarly journals Circularly Polarized Array with Enhanced Isolation Using Magnetic Metamaterials

Electronics ◽  
2019 ◽  
Vol 8 (11) ◽  
pp. 1356 ◽  
Author(s):  
Bo Li ◽  
Chun Yang ◽  
Zhanping Yang ◽  
Junwei Shi ◽  
Jianxing Li ◽  
...  
Keyword(s):  
Microstrip Antenna ◽  
Mutual Coupling ◽  
Active Element ◽  
Axial Ratio ◽  
Satellite System ◽  
Ring Resonators ◽  
Dual Band ◽  
Split Ring ◽  
Circularly Polarized ◽  
Beidou Navigation Satellite System

This article proposes a 2 × 2 circularly polarized array with enhanced isolation that could be used in the adaptive anti-jamming system for China’s Beidou Navigation Satellite System (BDS), and a compact dual-band microstrip antenna for GPS and GLONASS is designed at the center part of the array for multiple modes operation. The substrate integrated split ring resonators with negative effective permeability are used as the magnetic metamaterials. Four groups of the magnetic metamaterials are placed between the BDS antenna elements, which could constrain the EM filed in the area of the active element, and then significantly reduce the mutual coupling among the elements. The results tell that the isolation among the BDS elements are improved by more than 10 dB, and the performance of radiation patterns and the axial ratio of each BDS elements are also apparently improved compared to the array without magnetic metamaterials.

scholarly journals Modified Dual-Band Stacked Circularly Polarized Microstrip Antenna

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Guo Liu ◽  
Liang Xu ◽  
Yi Wang
Keyword(s):  
Radiation Pattern ◽  
Global Positioning System ◽  
Microstrip Antenna ◽  
High Performance ◽  
Axial Ratio ◽  
Dual Band ◽  
Optimized Design ◽  
Positioning System ◽  
Circularly Polarized ◽  
Global Positioning

A novel high-performance circularly polarized (CP) antenna is proposed in this paper. Two separate antennas featuring the global positioning system (GPS) dual-band operation (1.575 GHz and 1.227 GHz for L1 band and L2 band, resp.) are integrated with good isolation. To enhance the gain at low angle, a new structure of patch and two parasitic metal elements are introduced. With the optimized design, good axial ratio and near-hemispherical radiation pattern are obtained.

A compact polarization reconfigurable stacked microstrip antenna for WiMAX application

2020 ◽  
pp. 1-16
Author(s):  
Murari Shaw ◽  
Niranjan Mandal ◽  
Malay Gangopadhyay
Keyword(s):  
Microstrip Antenna ◽  
Impedance Matching ◽  
Axial Ratio ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Circularly Polarized ◽  
Rectangular Slot ◽  
Substrate Layer ◽  
Linearly Polarized ◽  
Coaxial Probe

Abstract In this paper, a stacked microstrip patch antenna with polarization reconfigurable property has been proposed for worldwide interoperability for microwave access (WiMAX) application. The proposed antenna has two substrate layers: upper and lower layers with two radiating patches connected with the coaxial probe. Without the upper layer the lower square-shaped substrate layer having regular hexagonal radiating patch with probe fed acts as a linear polarized antenna with impedance bandwidth for (S11 ≤ −10 dB) is 370 MHz 10.56% (3.32–3.69 GHz) cover WiMAX (3.4–3.69 GHz) application band. The hexagonal radiating patch is perturbed with an optimum rectangular slot to enhance the impedance bandwidth of the antenna. The lower substrate layer having hexagonal patch with the same probe position is stacked with the upper square-shaped substrate layer with same sized square patch and the upper patch soldered with the coaxial probe. The overall stacked antenna generates a circularly polarized band when the opposite corner of the top square radiating patch of the upper layer is truncated with optimum size. In order to generate another circularly polarized band and to improve the input impedance matching of the stacked antenna, the top radiating patch is perturbed with two slots and a slit. The stacked circularly polarized antenna generates impedance bandwidth of 12.75% (3.23–3.67 GHz) for (S11 ≤ −10 dB) with two circularly polarized bands (3.34–3.37 GHz) and (3.66–3.70 GHz) as per (axial ratio ≤ 3 dB) for WiMAX application. Therefore, the proposed antenna can be used as linearly polarized or dual band circularly polarized according to requirement.

Circularly polarized microstrip antenna arrays with reduced mutual coupling using metamaterial

2015 ◽  
Vol 8 (8) ◽  
pp. 1253-1263 ◽  
Author(s):  
R. Hafezifard ◽  
Jalil Rashed-Mohassel ◽  
Mohammad Naser-Moghadasi ◽  
R. A. Sadeghzadeh
Keyword(s):  
Antenna Arrays ◽  
Microstrip Antenna ◽  
Mutual Coupling ◽  
Ground Plane ◽  
High Gain ◽  
Ring Resonators ◽  
Magnetic Characteristics ◽  
Circularly Polarized ◽  
Antenna Performance ◽  
Left Handed

A circularly polarized (CP) and high gain Microstrip antenna is designed in this paper using metamaterial concepts. The antenna, built on a metamaterial substrate, showed significant size reduction and less mutual coupling in an array compared with similar arrays on conventional substrates. Demonstrated to have left-handed magnetic characteristics, the methodology uses complementary split-ring resonators (SRRs) placed horizontally between the patch and the ground plane. In order to reduce mutual coupling in the array structure, hexagonal-SRRs are embedded between antenna elements. The procedure is shown to have great impact on the antenna performance specifically its bandwidth which is broadened from 400 MHz to 1.2 GHz for X-band and as well as its efficiency. The structure has also low loss and improved standing wave ratio and less mutual coupling. The results show that a reduction of 26.6 dB in mutual coupling is obtained between elements at the operation frequency of the array. Experimental data show a reasonably good agreement between simulation and measured results.

scholarly journals A Compact Dual-Band Circularly Polarized Antenna with Wide HPBWs for CNSS Applications

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Chao Li ◽  
Fu-Shun Zhang ◽  
Fan Zhang ◽  
Kaiwen Yang
Keyword(s):  
Free Space ◽  
Axial Ratio ◽  
Satellite System ◽  
Dual Band ◽  
Navigation Satellite ◽  
Circularly Polarized ◽  
Horizontal Portion ◽  
Half Power ◽  
Sequential Phase ◽  
Compass Navigation

A compact dual-band circularly polarized antenna with wide half-power beamwidths (HPBWs) for compass navigation satellite system applications is proposed in this paper. The CP radiation is realized by arranging four compact dual-band inverted-F monopoles symmetrically to the center point, where the four monopoles are excited with a 90° phase offset through a compact sequential-phase feeding network. The compactness of the dual-band inverted-F monopole is realized by inserting two chip inductors in the horizontal portion of the monopole. The overall dimension of the antenna is only 0.211λ0 × 0.211λ0 × 0.057λ0, where λ0 is the corresponding free-space wavelength at 1.268 GHz. Experimental results show that the proposed antenna exhibits two overlapped impedance and axial ratio bandwidths of 50 MHz (1.236–1.286 GHz) and 40 MHz (1.532–1.572 GHz). Wide HPBWs of about 120°/125° and 121°/116° (XOZ/YOZ planes) at center frequencies (1.268, 1.561 GHz) of the CNSS-2 B3 and B1 bands are obtained, respectively. With these good performances, the antenna can be a good candidate for CNSS applications.

Compact Dual-Band Proximity-Fed Circularly Polarized Patch Antenna for BDS Applications

Frequenz ◽  
2015 ◽  
Vol 69 (9-10) ◽  
Author(s):  
Jianxing Li ◽  
Bin He ◽  
Jing Fang ◽  
Anxue Zhang
Keyword(s):  
Patch Antenna ◽  
Branch Length ◽  
Axial Ratio ◽  
Dielectric Substrate ◽  
Satellite System ◽  
Antenna Design ◽  
Dual Band ◽  
Antenna Aperture ◽  
Small Surface ◽  
Circularly Polarized

AbstractThis paper presents a compact dual-band proximity-fed circularly polarized (CP) patch antenna for BeiDou Navigation Satellite System (BDS) operation at B1 (1,561 MHz) and B3 (1,268 MHz) bands. The antenna aperture is minimized down to 26.6 mm (λ/9 at the B3 band) in diameter and 12 mm (λ/20 at the B3 band) in thickness using high permittivity dielectric substrate and meandered slots. The antenna design features that the resonant frequency in the higher band could be tuned independently by adjusting the branch length and breadth without affecting the lower band. To achieve right-handed CP (RHCP) radiation property, quadrature phase feeding is employed together with a broadband 0°–90° hybrid utilizing a small surface mount LTCC hybrid coupler chip. Experimental results show that the RHCP gain maintains larger than 1.5 dBic and the axial ratio (AR) stays below 3 dB within the B1 and B3 bands. This antenna design is a promising candidate for small BDS arrays as well as other dual-band BDS applications.

Reconfigurable circularly polarized capacitive coupled microstrip antenna

2016 ◽  
Vol 9 (4) ◽  
pp. 843-850 ◽  
Author(s):  
Dinesh Kumar Singh ◽  
Binod Kumar Kanaujia ◽  
Santanu Dwari ◽  
Ganga Prasad Pandey ◽  
Sandeep Kumar
Keyword(s):  
Circular Polarization ◽  
Microstrip Antenna ◽  
Axial Ratio ◽  
Dual Band ◽  
Single Frequency ◽  
Impedance Bandwidth ◽  
Pin Diode ◽  
Dual Frequency ◽  
Pin Diodes ◽  
Circularly Polarized

The design and measurement of reconfigurable circularly polarized capacitive fed microstrip antenna are presented. Small isosceles right angle triangular sections are removed from diagonally opposite corners for the generation of circular polarization (CP) of axial ratio bandwidth of 11.1%. Horizontal slits of different lengths are inserted at the edges of the truncated patch to provide the dual-band CP and by switching PIN diodes across the slits ON and OFF, reconfigurable circularly polarized antenna is realized. The antenna shows dual-band behavior with reconfigurable CP. In order to enhance the operation bandwidth of the antenna, an inclined slot was embedded on the patch along with PIN diodes across the horizontal slits. This proposed antenna gave an impedance bandwidth of 66.61% (ON state) ranging from 4.42 to 8.80 GHz and 68.42% (OFF state) ranging from 4.12 to 8.91 GHz and exhibits dual-frequency CP with PIN diode in OFF state and single-frequency CP with PIN diode in ON state with good axial ratio bandwidth. The axial ratio bandwidth of 4.42, 2.35, and 2.72% is obtained from the antenna. The antenna has a similar radiation pattern in all the three different CP bands and almost constant gain within the bands of CP operation.

scholarly journals Design of a Compact Dual-Band Microstrip Antenna Enabled by Complementary Split Ring Resonators for X-Band Applications

2018 ◽  
Vol 7 (3) ◽  
pp. 82-86 ◽  
Author(s):  
E. K. I. Hamad ◽  
M. Z. M. Hamdalla
Keyword(s):  
Microstrip Antenna ◽  
Split Ring Resonator ◽  
Ring Resonators ◽  
Dual Band ◽  
Split Ring ◽  
Full Wave ◽  
Radiating Element ◽  
X Band ◽  
Unit Cells ◽  
Tan Δ

In this paper, a design of highly effective dual-band microstrip antenna for X-band applications is developed. Dual-band response is obtained by etching four rectangular split ring resonator (RSRR) unit cells within the radiating element of a conventional patch initially designed to operate at 10 GHz. The proposed antenna is constructed on low lossy RT/duroid 5880 (ϵr = 2.2, tan δ = 0.0009) substrate of 20x20x1.575 mm3 total area. The antenna is tuned to operate at two resonant frequencies within 8 to 12 GHz depending on the geometric specifications of the RSRR's. A parametric study of different numbers of unit cells etched on the radiating element is investigated and discussed comprehensively through this study. Realized gain of about 6.2 and 6.8 dB at 8.8 and 10 GHz are attained. Consistent results are obtained between the measurements and simulation results using 3D full-wave FEM-base simulator.

Sign in / Sign up

Export Citation Format

Share Document