scholarly journals Probabilistic Evaluation and Improvement Measures of Power Supply Capability Considering Massive EV Integration

Electronics ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 1158 ◽  
Author(s):  
Sun ◽  
Zhang ◽  
Yang ◽  
Liu ◽  
Zhang
Keyword(s):  
Power Supply ◽  
Power Distribution ◽  
Distribution Network ◽  
Temporal Distribution ◽  
Distribution Networks ◽  
Evaluation Index ◽  
Power Distribution Networks ◽  
Probabilistic Evaluation ◽  
Improvement Measures ◽  
Ev Charging

Massive electric vehicle (EV) integration has been an inevitable trend for future power distribution networks. However, the spatial-temporal randomness of EV charging behavior may cause insufficiency of power supply capability. This paper simulates the charging loads with massive EV integration, proposes a probabilistic evaluation index to evaluate the probability of insufficient power supply capability, and gives improvement measures for power distribution networks without hardware upgrading. First, the spatial-temporal distribution of EV charging loads is simulated via Monte Carlo method, which particularly divides EVs into three categories, private cars, buses, and taxis. Then, aggregated with conventional loads, total supply capacity of a power distribution network can be calculated on different time periods. Second, for the uncertainty of EV charging loads both in time and space, a probabilistic evaluation index is addressed to evaluate the probability of power supply capability insufficiency. After that, several improvement measures of the charging strategy are given to relieve the insufficiency of power supply capability. Finally, taking the simplified distribution network of a typical power supply mode in China’s Fujian province as an example, three scenarios with different vehicle quantities and parameters are designed, and the effectiveness of the evaluation index and improvement measures proposed are identified. The results can provide evidences for constraining EV charging behaviors with massive integration.

Influence of distributed power supply in distributed power distribution network

2021 ◽  
pp. 1-8
Author(s):  
Xin Shen ◽  
Hongchun Shu ◽  
Min Cao ◽  
Nan Pan ◽  
Junbin Qian
Keyword(s):  
Power Supply ◽  
Power Distribution ◽  
Short Circuit ◽  
Power Grid ◽  
Distribution Network ◽  
Distribution Networks ◽  
Power Supplies ◽  
Power Distribution Network ◽  
Power Sources ◽  
Distributed Power

In distribution networks with distributed power supplies, distributed power supplies can also be used as backup power sources to support the grid. If a distribution network contains multiple distributed power sources, the distribution network becomes a complex power grid with multiple power supplies. When a short-circuit fault occurs at a certain point on the power distribution network, the size, direction and duration of the short-circuit current are no longer single due to the existence of distributed power, and will vary with the location and capacity of the distributed power supply system. The change, in turn, affects the current in the grid, resulting in the generation and propagation of additional current. This power grid of power electronics will cause problems such as excessive standard mis-operation, abnormal heating of the converter and component burnout, and communication system failure. It is of great and practical significance to study the influence of distributed power in distributed power distribution networks.

Minimizing area of VLSI power distribution networks using river formation dynamics

2018 ◽  
Vol 20 (4) ◽  
pp. 417-429 ◽  
Author(s):  
Satyabrata Dash ◽  
Sukanta Dey ◽  
Deepak Joshi ◽  
Gaurav Trivedi
Keyword(s):  
Power Distribution ◽  
Large Scale ◽  
Distribution Network ◽  
Distribution Networks ◽  
Power Distribution Networks ◽  
Power Distribution Network ◽  
Content Type ◽  
Ir Drop ◽  
Formation Dynamics ◽  
River Formation Dynamics

Purpose The purpose of this paper is to demonstrate the application of river formation dynamics to size the widths of power distribution network for very large-scale integration designs so that the wire area required by power rails is minimized. The area minimization problem is transformed into a single objective optimization problem subject to various design constraints, such as IR drop and electromigration constraints. Design/methodology/approach The minimization process is carried out using river formation dynamics heuristic. The random probabilistic search strategy of river formation dynamics heuristic is used to advance through stringent design requirements to minimize the wire area of an over-designed power distribution network. Findings A number of experiments are performed on several power distribution benchmarks to demonstrate the effectiveness of river formation dynamics heuristic. It is observed that the river formation dynamics heuristic outperforms other standard optimization techniques in most cases, and a power distribution network having 16 million nodes is successfully designed for optimal wire area using river formation dynamics. Originality/value Although many research works are presented in the literature to minimize wire area of power distribution network, these research works convey little idea on optimizing very large-scale power distribution networks (i.e. networks having more than four million nodes) using an automated environment. The originality in this research is the illustration of an automated environment equipped with an efficient optimization technique based on random probabilistic movement of water drops in solving very large-scale power distribution networks without sacrificing accuracy and additional computational cost. Based on the computation of river formation dynamics, the knowledge of minimum area bounded by optimum IR drop value can be of significant advantage in reduction of routable space and in system performance improvement.

scholarly journals Adaptive Day-Ahead Prediction of Resilient Power Distribution Network Partitions

2021 ◽  
Author(s):  
Chinmay Shah ◽  
Richard Wies
Keyword(s):  
Power Distribution ◽  
Renewable Energy Sources ◽  
Optimization Technique ◽  
Distribution Network ◽  
Distribution Networks ◽  
Optimization Techniques ◽  
Power Distribution Networks ◽  
Power Distribution Network ◽  
High Penetration ◽  
Islanded Mode

The conventional power distribution network is being transformed drastically due to high penetration of renewable energy sources (RES) and energy storage. The optimal scheduling and dispatch is important to better harness the energy from intermittent RES. Traditional centralized optimization techniques limit the size of the problem and hence distributed techniques are adopted. The distributed optimization technique partitions the power distribution network into sub-networks which solves the local sub problem and exchanges information with the neighboring sub-networks for the global update. This paper presents an adaptive spectral graph partitioning algorithm based on vertex migration while maintaining computational load balanced for synchronization, active power balance and sub-network resiliency. The parameters that define the resiliency metrics of power distribution networks are discussed and leveraged for better operation of sub-networks in grid connected mode as well as islanded mode. The adaptive partition of the IEEE 123-bus network into resilient sub-networks is demonstrated in this paper.

scholarly journals Rancang Bangun Alat Deteksi Stabilitas Tegangan Jangka Panjang Pada Jaringan Distribusi Tegangan Rendah

Electrician ◽  
2019 ◽  
Vol 12 (2) ◽  
pp. 33
Author(s):  
Osea Zebua ◽  
Noer Soedjarwanto ◽  
Jemi Anggara
Keyword(s):  
Power Distribution ◽  
Voltage Stability ◽  
Low Voltage ◽  
Distribution Network ◽  
Distribution Networks ◽  
Current Data ◽  
Voltage Distribution ◽  
Power Distribution Networks ◽  
Long Time

Intisari — Stabilitas tegangan telah menjadi perhatian yang penting dalam operasi jaringan distribusi tenaga listrik. Ketidakstabilan tegangan dapat menyebabkan kerusakan pada peralatan-peralatan listrik bila terjadi dalam waktu yang lama. Makalah ini bertujuan untuk merancang dan membuat peralatan deteksi stabilitas tegangan jangka panjang pada jaringan tegangan rendah. Sensor tegangan dan sensor arus digunakan untuk memperoleh data tegangan dan arus. Mikrokontroler Arduino digunakan untuk memproses perhitungan deteksi stabilitas tegangan jangka panjang dari data tegangan yang diperoleh dari sensor. Hasil deteksi kondisi stabilitas tegangan ditampilkan dengan indikator lampu led. Hasil pengujian pada jaringan distribusi tegangan rendah tiga fasa menunjukkan bahwa peralatan dapat mendeteksi gangguan stabilitas tegangan jangka panjang secara online dan dinamis.Kata kunci — Deteksi, stabilitas tegangan jangka panjang, jaringan distribusi tegangan rendah. Abstract — Voltage stability has become important concern in the operation of electric power distribution networks. Voltage instability can cause damage to electrical equipments if it occurs for a long time. This paper aims to design and build long-term voltage stability detection equipment on low-voltage network. Voltage sensors and current sensors are used to obtain voltage and current data. The Arduino microcontroller is used to process calculation of long-term voltage stability detection from data obtained from the sensors. The results of detection of voltage stability conditions are displayed with the LED indicators. Test result on three-phase low-voltage distribution network shows that equipment can detect long–term voltage stability disturbance online and dynamically.Keywords— Detection, long-term voltage stability, low-voltage distribution network.

scholarly journals Probabilistic Spatial Load Forecasting Based on Hierarchical Trending Method

Energies ◽  
2020 ◽  
Vol 13 (18) ◽  
pp. 4643 ◽  
Author(s):  
Vasileios Evangelopoulos ◽  
Panagiotis Karafotis ◽  
Pavlos Georgilakis
Keyword(s):  
Power Distribution ◽  
Mean Squared Error ◽  
Distribution Network ◽  
Load Forecasting ◽  
Distribution Networks ◽  
Prediction Intervals ◽  
Probabilistic Forecasting ◽  
Power Distribution Networks ◽  
Spatial Error ◽  
Electric Loads

The efficient spatial load forecasting (SLF) is of high interest for the planning of power distribution networks, mainly in areas with high rates of urbanization. The ever-present spatial error of SLF arises the need for probabilistic assessment of the long-term point forecasts. This paper introduces a probabilistic SLF framework with prediction intervals, which is based on a hierarchical trending method. More specifically, the proposed hierarchical trending method predicts the magnitude of future electric loads, while the planners’ knowledge is used to improve the allocation of future electric loads, as well as to define the year of introduction of new loads. Subsequently, the spatial error is calculated by means of root-mean-squared error along the service territory, based on which the construction of the prediction intervals of the probabilistic forecasting part takes place. The proposed probabilistic SLF is introduced to serve as a decision-making tool for regional planners and distribution network operators. The proposed method is tested on a real-world distribution network located in the region of Attica, Athens, Greece. The findings prove that the proposed method shows high spatial accuracy and reduces the spatial error compared to a business-as-usual approach.

scholarly journals Optimization of maintenance management of trees in powerdistribution systems

Tecnura ◽  
2013 ◽  
Vol 17 (35) ◽  
pp. 12
Author(s):  
José Alexander Martínez ◽  
Fredy Hernán Martínez Sarmiento
Keyword(s):  
Fuzzy Logic ◽  
Power Supply ◽  
Power Distribution ◽  
Distribution Networks ◽  
Growth Patterns ◽  
Optimal Time ◽  
Power Distribution Networks ◽  
Medium Voltage ◽  
History Of ◽  
Key Aspects

We propose a data-analysis-based methodology for maintaining trees that affect power distribution networks. From the information captured in the field, we use fuzzy-logic-based techniques and models together with genetic algorithms so as to focus maintenance activities on the optimal time and place. The strategy is aimed at two key aspects: first, the history of failure events caused by trees on medium-voltage power supply systems; this information is used to calculate quality indicators such as energy-not-supplied (ENS) and number-of-users (NU) affected due to falling trees only. In this case we use a fuzzy-logic-based system to weight and find the critical circuits on which forest maintenance should be performed. Second, we construct an objective function based on tree-to-network distances and growth patterns of trees (classified per species) in order to simulate forest maintenance; this is achieved using a genetic algorithm to determine optimum pruning cycles for a given power supply system. We use real historical data of medium voltage circuits for system setting as well as for performance evaluation.

scholarly journals Reflected Traveling Wave Based Single-Ended Fault Location in Distribution Networks

Energies ◽  
2020 ◽  
Vol 13 (15) ◽  
pp. 3917 ◽  
Author(s):  
Yangang Shi ◽  
Tao Zheng ◽  
Chang Yang
Keyword(s):  
Traveling Wave ◽  
Power Distribution ◽  
Fault Location ◽  
Single Phase ◽  
Distribution Network ◽  
Distribution Networks ◽  
Power Distribution Networks ◽  
Reflected Waves ◽  
Ground Fault ◽  
Location Methods

Traveling wave (TW)-based fault-location methods have been used to determine single-phase-to-ground fault distance in power-distribution networks. The previous approaches detected the arrival time of the initial traveling wave via single ended or multi-terminal measurements. Regarding the multi-branch effect, this paper utilized the reflected waves to obtain multiple arriving times through single ended measurement. Potential fault sections were estimated by searching for the possible traveling wave propagation paths in accordance with the structure of the distribution network. This approach used the entire propagation of a traveling wave measured at a single end without any prerequisite of synchronization, which is a must in multi-terminal measurements. The uniqueness of the fault section was guaranteed by several independent single-ended measurements. Traveling waves obtained in a real 10 kV distribution network were used to determine the fault section, and the results demonstrate the significant effectiveness of the proposed method.

scholarly journals Research on Construction and Evaluation Method of Comprehensive Evaluation Index System for Investment Benefit of Distribution Network

2021 ◽  
Vol 257 ◽  
pp. 02063
Author(s):  
Ying Li ◽  
Xueying Zhang ◽  
Yue Zhang ◽  
Laiyuan Lai ◽  
Chao Chen
Keyword(s):  
Power Supply ◽  
Index System ◽  
Evaluation Method ◽  
Comprehensive Evaluation ◽  
Distribution Network ◽  
Distribution Networks ◽  
Evaluation Index System ◽  
Evaluation Index ◽  
Investment Efficiency

Under the new situation, the improvement of investment efficiency and efficiency will be the basic criteria for evaluating the quality of power supply enterprises’ investment activities in the distribution network. To this end, based on the characteristics of distribution network construction, combined with the internal and external development trends of power supply enterprises and development and promotion needs, this paper constructs a scientific comprehensive evaluation index system and evaluation method for the investment benefits of distribution networks, which is useful for scientifically grasping the investment needs and investment capabilities of power supply enterprises. It is of great significance to achieve a more precise and lean level of investment in the distribution network.

scholarly journals Digital Control of Electric Power Flows in Unbalanced Distribution Networks as Part of The Automated Metering and Control System

2021 ◽  
pp. 38-46
Author(s):  
T. Omorov ◽  
B. Takyrbashev ◽  
K. Zakiriaev ◽  
T. Koibagarov
Keyword(s):  
Control System ◽  
Power Distribution ◽  
Distribution Network ◽  
Distribution Networks ◽  
Digital Controller ◽  
Information Control ◽  
Power Distribution Networks ◽  
Voltage Unbalance ◽  
Three Phase ◽  
And Control

This paper aims to address the problem of controlling the electricity flows in power distribution networks (PDN) operating under current and voltage unbalance. As is known, the unbalance factor is responsible for significant losses of active power and, therefore, is detrimental to the PDN efficiency and technical and economic performance. The purpose of control is to minimize technical power losses in the distribution network. This is to be achieved by building an information control system (ICS) for balancing a three-phase network as part of the automated metering and control system (AMCS). The latter is currently being widely adopted to automate information processes in PDNs. However, the AMCS does not include technologies for solving the problem in question. We propose an algorithm of the digital controller operation for the ICS. Its primary function is to maintain phase power at a given level in real-time. The algorithm concept is based on the idea of required redistribution of electricity flows between the phases of the distribution network by appropriately switching single-phase loads of consumers (users) to ensure a minimum spread of phase powers relative to their required level. To achieve the goal of control, we construct criterion functions that determine qualitative indices of the ICS operation and develop computational schemes for their minimization. Control actions to be generated by the digital controller and performed on the facility represent a digital code that contains data on the coordinates of three-phase network loads to be switched to another phase.

Sign in / Sign up

Export Citation Format

Share Document