scholarly journals Near-Field Immunity Test Method for Fast Radiated Immunity Test Debugging of Automotive Electronics

Electronics ◽  
2019 ◽  
Vol 8 (7) ◽  
pp. 797 ◽  
Author(s):  
Jawad Yousaf ◽  
Doojin Lee ◽  
JunHee Han ◽  
Hosang Lee ◽  
Muhammad Faisal ◽  
...  
Keyword(s):  
Automotive Industry ◽  
Near Field ◽  
Cost Effective ◽  
Field Testing ◽  
Input Power ◽  
Test Method ◽  
Automotive Electronics ◽  
Test Results ◽  
Electric Power Steering ◽  
Power Steering

This study presents a near-field immunity test (NFIT) method for the fast debugging of radiated susceptibility of industrial devices. The proposed approach is based on the development of an NFIT setup which comprises of developed near-field electric and magnetic field probes and device under test (DUT). The developed small-size and handy near-field testing probes inject the high electric (up to 1000 V/m) and magnetic (up to 2.4 A/m) fields on the DUT in the radar pulse ranges (1.2 to 1.4 GHz and 2.7 to 3.1 GHz) with the lower fed input power (up to 15 W) from the power amplifier in the developed NFIT setup. The proof of concept is validated with the successful near-field immunity debugging of an electric power steering (EPS) device used in the automotive industry with the developed NFIT setup. The radiated susceptibility debugging test results of developed NFIT method and conventional method of ISO 11452-2 test setup turned out to be close to each other for the tested DUT in immunity performance. The proposed procedure has advantages of industry usefulness with fast, handy, and cost-effective radiated immunity debugging of the DUT without the requirement of large antenna, high-power amplifiers, optical DUT connecting harness, and an anechoic chamber as needed in ISO 11452-2 standard setup for the debugging analysis.

Detection of Antiphospholipid Antibodies Using a Novel Multiplex Test Method: Correlation with ELISA Methods.

Blood ◽  
2006 ◽  
Vol 108 (11) ◽  
pp. 4102-4102
Author(s):  
Kim A. Janatpour ◽  
Robert C. Gosselin ◽  
John T. Owings ◽  
Ted Wun
Keyword(s):  
Cost Effective ◽  
Elisa Test ◽  
Small Sample ◽  
Test Method ◽  
Antibody Detection ◽  
Antiphospholipid Antibody ◽  
Antiphospholipid Antibody Syndrome ◽  
Test Results ◽  
Clinical Sensitivity ◽  
Positive Results

Abstract -Background: Laboratory criteria for the antiphospholipid antibody syndrome (APS) include detection of the lupus anticoagulant (LA) by coagulation based tests, or detection of either anti-cardiolipin (aCL), or anti-B2-glycoprotein I (aB2GPI) antibodies by enzyme-linked immunoabsorbant assay (ELISA). Multiplex testing enables simultaneous measurement of multiple serum antibodies with small beads coated with target antigens and small sample volumes (5 μL). We compared the concordance of a prototype multiplex method to standard ELISA methods for measuring IgG and IgM antibodies directed against CL or B2GPI. Methods: Samples from patients with suspected APS were tested for IgG and IgM aCL and aB2GPI antibodies using standard ELISA methods (ELISA, Bio-Rad Laboratories, Hercules, CA) and by a prototype multiplex bead set analyzed on the BioPlex 2200 (Bio-Rad Laboratories, Hercules, CA). The multiplex method used beads coated with either CL alone, B2GPI alone, or CL-B2GPI complex. Results were normalized using ratios (obtained result/upper limit of normal). A positive result was defined as a ratio of > 1. For CL, the multiplex test is considered positive if positive results are present using beads with either the CL alone or the CL-B2GPI complex. Results: Table 1. Concordance of ELISA vs Multiplex tests for antiphospholipid antibody detection Multiplex Test Results Concordance (%) ELISA Test Results Positive Negative Positive Negative All Results aCL-IgG Positive (n=52) 30 22 58 - Negative (n=232) 32 200 - 86 82 aCL-IgM Positive (n=42) 32 10 76 - Negative (n=241) 34 207 - 85 84 aβ2GPI-IgG Positive (n=34) 20 14 59 - Negative (n=249) 17 232 - 93 89 aβ2GPI-IgM Positive (n=61) 31 30 51 - Negative (n=219) 22 197 - 90 81 Conclusions: The overall concordance of multiplex results with ELISA results was good (81–89%). Negative multiplex results showed excellent correlation with ELISA (85–93%). Positive multiplex results had variable correlation with ELISA (51–76%). Evaluation of clinically significant positive results and clinical outcome measures is needed to determine clinical sensitivity and specificity of the multiplex test. Further refinement of the multiplex platform may provide an efficient and cost-effective assay for antibodies associated with the antiphospholipid syndrome.

Heat to Electricity Conversion Efficiency Measurement for Thermoelectric Unicouple

2007 ◽  
Vol 336-338 ◽  
pp. 883-887
Author(s):  
Qing Hua Wang ◽  
Jian Zhong Zhang ◽  
Li Li Zhang ◽  
Ze Shen Wang
Keyword(s):  
Output Power ◽  
Conversion Efficiency ◽  
Thermal Power ◽  
Input Power ◽  
Test Method ◽  
Test Results ◽  
Radiation Heat ◽  
Thermoelectric Element ◽  
Power Meter ◽  
Electrical Output

The conversion efficiency of heat to electricity is the basic parameter of thermoelectric element, thermoelectric unicouple and thermoelectric devices. In principle, the heat to electricity conversion efficiency of thermoelectric element has been defined as the electrical output power of the element divided by its thermal input power. Due to the heat loss by convection and radiation heat transfer the test result of the heat to electricity conversion efficiency has a large errors. The authors present a test method for heat to electricity conversion efficiency of thermoelectric unicouple. The thermal input power of thermoelectric unicouple has been divided into the electrical output power plus thermal output power out of the cold end of the unicouple. The later has been determined by a thermoelectric thermal power meter. The method avoids the difficulties to measure the input thermal power into the hot side of the unicouple, so that the convection and radiation heat lose out of the unicouple side can be ignored. Owing to Seebeck Coefficient of the thermoelectric semiconductor materials could be many times of the metals, the thermoelectric thermal power meter has high sensitivity, so that high test precision could be gained in test for conversion efficiency of thermoelectric unicouple. The paper presents some test results for heat to electricity conversion efficiency of thermoelectric unicouple, and discusses about the factors which affect the test results.

Experiences in Field Testing a Variety of Aeration Equipment in Sweden and in the U.S.A. by Offgas Analysis

1989 ◽  
Vol 21 (10-11) ◽  
pp. 1421-1429
Author(s):  
D. T. Redmon ◽  
W. C. Boyle ◽  
B. G. Hellstrom
Keyword(s):  
Oxygen Transfer ◽  
State Of The Art ◽  
Field Testing ◽  
Analysis Procedure ◽  
Test Results ◽  
Transfer Testing ◽  
Parallel Tests

The background and theory of the offgas analysis procedure used in oxygen transfer testing of diffused aeration tanks is reviewed. Correlation of this method with other applicable procedures in parallel tests is reported. State-of-the-art equipment and accessories are described. Advantages of the procedure are identified, as are precautionary considerations regarding its use. Applications considered appropriate for its employment are delineated. Experience and test results in both Sweden and the U.S.A. on a variety of aeration devices are disclosed.

Development and Field Testing of an Inclined Flanged Compact Diffuser for a Micro Wind Turbine

2014 ◽  
Author(s):  
Sandip Kale ◽  
S. N. Sapali
Keyword(s):  
Wind Turbine ◽  
Wind Velocity ◽  
Wind Turbines ◽  
Energy Production ◽  
Cost Effective ◽  
Field Testing ◽  
International Electrotechnical Commission ◽  
Average Wind Speed ◽  
Average Wind ◽  
Power Curves

Micro wind turbines installed in various applications, experience average wind speed for most of the time during operations. Power produced by the wind turbine is proportional to the cubic power of the wind velocity and a small increase in wind velocity results increases power output significantly. The approach wind velocity can be increased by covering traditional wind turbine with a diffuser. Researchers are continuously working to develop a compact, lightweight, cost effective and feasible diffuser for wind turbines. The present work carried out to develop a diffuser with these stated objectives. A compact, lightweight inclined flanged diffuser developed for a micro wind turbine. Bare micro wind turbine and wind turbine covered with developed efficient inclined flanged diffuser tested in the field as per International Electrotechnical Commission (IEC) standards and results presented in the form of power curves. The prediction of annual energy production for both wind turbines determined as per IEC standards.

Sensor Fault-Tolerant Control of Electric Power Steering for Electric Vehicles

ICTE 2015 ◽  
2015 ◽  
Author(s):  
Chen Huang ◽  
Long Chen ◽  
Kaiding Zhang ◽  
Haobin Jiang ◽  
Chaochun Yuan
Keyword(s):  
Electric Power ◽  
Electric Vehicles ◽  
Fault Tolerant ◽  
Fault Tolerant Control ◽  
Sensor Fault ◽  
Electric Power Steering ◽  
Power Steering

The Research of IC Test Based on LTX-77 Test System

2014 ◽  
Vol 496-500 ◽  
pp. 1176-1179
Author(s):  
Li Tan ◽  
Yu Fang
Keyword(s):  
Test Object ◽  
Test System ◽  
Test Method ◽  
Test Results ◽  
Analog Ic ◽  
Test Platform ◽  
Logic Functions ◽  
Actual Test ◽  
Ic Test

LTX-77 test system is a large IC test system that is used for various kinds of analog IC, digital IC and analog digital mixed IC. It can be used to test DC parameters, AC parameters and logic functions. In the paper, the IC test platform is LTX-77 test system. IC ADC0804 was tested as the test object. The test method of IC is described in the view of actual test. The test results show that the test system is convenient and accurate, which has important practical value for IC manufacturers and users.

Sign in / Sign up

Export Citation Format

Share Document