scholarly journals Nonlinearities Associated with Impaired Sensors in a Typical SHM Experimental Set-Up

Electronics ◽  
2018 ◽  
Vol 7 (11) ◽  
pp. 303 ◽  
Author(s):  
Stefano Carrino ◽  
Francesco Nicassio ◽  
Gennaro Scarselli
Keyword(s):  
Structural Integrity ◽  
Residual Life ◽  
Guided Wave ◽  
Nonlinear Behaviour ◽  
Geometrical Characterization ◽  
Electromechanical Impedance ◽  
Numerical Studies ◽  
Set Up ◽  
Teflon Film

Structural Health Monitoring (SHM) gives a diagnosis of a structure assessing the structural integrity and predicting the residual life through appropriate data processing and interpretation. A structure must remain in the design domain, although it can be subjected to normal aging due to usage, action of the environment, and accidental events. SHM involves the integration of electronic devices in the inspected structure that sometimes are Piezoelectric Transducers (PZT). These are lightweight and small and can be produced in different geometries. They are used both in guided wave-based and electromechanical impedance-based methods. The PZT bonding requires essential steps such as preparation of the surfaces, application of the adhesive, and assembly that make the bonding process not so easy to be realised. Furthermore, adhesives are susceptible to environmental degradation. Transducer debonding or non-uniform distributed glue underneath the sensor causes the reduction of the performance and can affect the reliability of the SHM system. In this paper, a sensor diagnostic method for the monitoring of the PZT operational status is proposed in order to detect bonding defect/damage between a PZT patch and a host structure. The authors propose a method based on the nonlinear behaviour of the contact PZT/structure that allows the identification of the damaged PZT and the geometrical characterization of the debonding. The feasibility of the diagnostic procedure is demonstrated by numerical studies and experiments, where disbonds were created by inhibiting the adhesive action on a part of the interface through Teflon film. The proposed method can be used to evaluate the sensor functionality after an extreme loading event or over a long period of service time.

GEOMETRICAL CHARACTERIZATION OF KELVIN-LIKE METAL FOAMS FOR DIFFERENT STRUT SHAPES AND POROSITY

2015 ◽  
Vol 18 (6) ◽  
pp. 637-652 ◽  
Author(s):  
Prashant Kumar ◽  
Frederic Topin ◽  
Lounes Tadrist
Keyword(s):  
Metal Foams ◽  
Geometrical Characterization

Rapid, Refined, and Robust Method for Expression, Purification, and Characterization of Recombinant Human Amyloid-beta M1-42

2019 ◽  
Author(s):  
Priya Prakash ◽  
Travis Lantz ◽  
Krupal P. Jethava ◽  
Gaurav Chopra
Keyword(s):  
Amyloid Beta ◽  
Western Blots ◽  
Force Microscopy ◽  
E Coli ◽  
Atomic Force ◽  
Set Up ◽  
Short Time

Amyloid plaques found in the brains of Alzheimer’s disease (AD) patients primarily consists of amyloid beta 1-42 (Ab42). Commercially, Ab42 is synthetized using peptide synthesizers. We describe a robust methodology for expression of recombinant human Ab(M1-42) in Rosetta(DE3)pLysS and BL21(DE3)pLysS competent E. coli with refined and rapid analytical purification techniques. The peptide is isolated and purified from the transformed cells using an optimized set-up for reverse-phase HPLC protocol, using commonly available C18 columns, yielding high amounts of peptide (~15-20 mg per 1 L culture) in a short time. The recombinant Ab(M1-42) forms characteristic aggregates similar to synthetic Ab42 aggregates as verified by western blots and atomic force microscopy to warrant future biological use. Our rapid, refined, and robust technique to purify human Ab(M1-42) can be used to synthesize chemical probes for several downstream in vitro and in vivo assays to facilitate AD research.

Isolation and characterization of oleochemical compounds from watermelon seed

2020 ◽  
Vol 10 (4) ◽  
pp. 79-82
Author(s):  
Madhubhushan M ◽  
Seshaiah S ◽  
Chandrudu J ◽  
Sagar R ◽  
Akila CR
Keyword(s):  
Cutting Tool ◽  
Citrullus Lanatus ◽  
Fatty Esters ◽  
Mineral Oils ◽  
Light Yellow ◽  
Isolation And Characterization ◽  
The Common ◽  
Set Up ◽  
Natural Gradation

The common watermelon item (Citrullus lanatus) seeds were gained from castoffs verdant nourishments for use by decorating, sun ventilation and pulverizing. Light yellow-toned oil was gotten by dissolvable withdrawal using oil atmosphere and the going with traits were gotten using oil ether: pH, refractive rundown, thickness, dissolvable miscibility, coagulating temperature, fire nature, express gravity, streak point and warmth of consuming. With a shallow level of unsaturation, stepped level of smoothness, and proximity of raised degree of the sensible proportion of free unsaturated fats. The low assessment of the solidifying temperature of the oil offered a hint that the oil can be managed in various areas paying little heed to the qualification in temperature. The following level of linoleic destructive of the oil offers a hint of natural gradation of solidarity. Fatty esters are increasing expanding significance as a biodegradable swap for mineral oils. In some request regions, for example, cutting tool oil, gearbox, pressure-driven oils, and greases for raw petroleum creation, the oleochemical items are set up. Nonetheless, certain particular wellsprings of fatty esters are hitherto to be abused for this comparative reason. This exploration subsequently tests into one of the less used wellsprings of fatty esters in watermelon. The oil from the kernels demonstrations a top-notch yield presents significant utilitarian gatherings for change and thus was utilized to set up an assortment of oleochemicals which demonstrated excellence materials in contrast with the routinely utilized oils feed frameworks for oleochemicals after portrayal. The photopolymers acquired indicated piercing vinyl protons for consistent polymerize.

Neuropharmacological Characterization of Dioclea altissima Seed Lectin (DAL) in Mice: Evidence of Anxiolytic-like Effect Mediated by Serotonergic, GABAergic Receptors and NO Pathway

2020 ◽  
Vol 26 (31) ◽  
pp. 3895-3904
Author(s):  
João R.C. Araújo ◽  
Adriana R. Campos ◽  
Marina de Barros M.V. Damasceno ◽  
Sacha A.A.R. Santos ◽  
Maria K.A. Ferreira ◽  
...  
Keyword(s):  
Structural Integrity ◽  
Elevated Plus Maze ◽  
Biological Activities ◽  
Plant Lectins ◽  
Plus Maze ◽  
Marble Burying ◽  
Gabaergic Receptors ◽  
The Central Nervous System ◽  
Hole Board

Background: Plant lectins have shown promising biological activities in the central nervous system (CNS). Objective: This study evaluated the effect of DAL, a lectin isolated from the seeds of the Dioclea altissima species, having binding affinity to D-glucose or D-mannose residues, on mice behavior. Methods: Mice (n=6/group) were treated (i.p.) with DAL (0.25, 0.5 or 1 mg/kg) or vehicle and subjected to several tests (open field/OFT, marble-burying/MBT, hole-board/HBT, elevated plus maze/PMT, tail suspension/ TST, forced swimming/FST or rotarod/RRT). Pizotifen, cyproheptadine, flumazenil, L-NAME, 7-NI, Larginine or yohimbine were administered 15 min before DAL (0.5 mg/kg) and the animals were evaluated on PMT. It was also verified whether the DAL effect depended on its structural integrity and ability to interact with carbohydrates. Results: The results showed there were no neurobehavioral changes in the mice at the RRT, FST and locomotion in the OFT. DAL (0.25, 0.5 or 1 mg/kg) increased the behavior of grooming and rearing in the OFT, head dips in the HBT, pedalling in the TST and decreased the number of marbles hidden in the MBT. In the PMT, DAL (0.25, 0.5 and 1 mg/kg) and Diazepam increased the frequency of entries in the open arms and the time of permanence in the open arms without affecting the locomotor activity. The effect of DAL was dependent on carbohydrate interaction and protein structure integrity and it prevented by pizotifen, cyproheptadine, flumazenil, L-NAME and 7-NI, but not by L-arginine or yohimbine. Conclusion: DAL was found to have an anxiolytic-like effect mediated by the 5-HT and GABAergic receptors and NO pathway.

scholarly journals Characterization of Mechanical Heterogeneity in Dissimilar Metal Welded Joints

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4145
Author(s):  
He Xue ◽  
Zheng Wang ◽  
Shuai Wang ◽  
Jinxuan He ◽  
Hongliang Yang
Keyword(s):  
Mechanical Properties ◽  
Finite Element ◽  
Welded Joints ◽  
Structural Integrity ◽  
Material Interfaces ◽  
Mechanical Heterogeneity ◽  
Finite Element Software ◽  
Dissimilar Metal ◽  
Stress Changes

Dissimilar metal welded joints (DMWJs) possess significant localized mechanical heterogeneity. Using finite element software ABAQUS with the User-defined Material (UMAT) subroutine, this study proposed a constitutive equation that may be used to express the heterogeneous mechanical properties of the heat-affected and fusion zones at the interfaces in DMWJs. By eliminating sudden stress changes at the material interfaces, the proposed approach provides a more realistic and accurate characterization of the mechanical heterogeneity in the local regions of DMWJs than existing methods. As such, the proposed approach enables the structural integrity of DMWJs to be analyzed in greater detail.

A new approach to the bienergy and biangle of a moving particle lying in a surface of lorentzian space

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Talat Körpınar ◽  
Yasin Ünlütürk
Keyword(s):  
Vector Fields ◽  
Elastic Surface ◽  
Geometrical Characterization ◽  
Lorentzian Space ◽  
New Approach ◽  
Darboux Vector ◽  
Moving Particle ◽  
The Relationship ◽  
Surface Curve

AbstractIn this research, we study bienergy and biangles of moving particles lying on the surface of Lorentzian 3-space by using their energy and angle values. We present the geometrical characterization of bienergy of the particle in Darboux vector fields depending on surface. We also give the relationship between bienergy of the surface curve and bienergy of the elastic surface curve. We conclude the paper by providing bienergy-curve graphics for different cases.

scholarly journals Rail Diagnostics Based on Ultrasonic Guided Waves: An Overview

2021 ◽  
Vol 11 (3) ◽  
pp. 1071
Author(s):  
Davide Bombarda ◽  
Giorgio Matteo Vitetta ◽  
Giovanni Ferrante
Keyword(s):  
Guided Waves ◽  
Structural Integrity ◽  
Diagnostic Procedures ◽  
Guided Wave ◽  
Rolling Stock ◽  
Technical Literature ◽  
Track Maintenance ◽  
Rail Network ◽  
Ultrasonic Guided Wave ◽  
Maintenance And Inspection

Rail tracks undergo massive stresses that can affect their structural integrity and produce rail breakage. The last phenomenon represents a serious concern for railway management authorities, since it may cause derailments and, consequently, losses of rolling stock material and lives. Therefore, the activities of track maintenance and inspection are of paramount importance. In recent years, the use of various technologies for monitoring rails and the detection of their defects has been investigated; however, despite the important progresses in this field, substantial research efforts are still required to achieve higher scanning speeds and improve the reliability of diagnostic procedures. It is expected that, in the near future, an important role in track maintenance and inspection will be played by the ultrasonic guided wave technology. In this manuscript, its use in rail track monitoring is investigated in detail; moreover, both of the main strategies investigated in the technical literature are taken into consideration. The first strategy consists of the installation of the monitoring instrumentation on board a moving test vehicle that scans the track below while running. The second strategy, instead, is based on distributing the instrumentation throughout the entire rail network, so that continuous monitoring in quasi-real-time can be obtained. In our analysis of the proposed solutions, the prototypes and the employed methods are described.

Sign in / Sign up

Export Citation Format

Share Document