scholarly journals Realization of Low-Voltage and High-Current Rectifier Module Control System Based on Nonlinear Feed-Forward PID Control

Electronics ◽  
2021 ◽  
Vol 10 (17) ◽  
pp. 2138
Author(s):  
Jinfeng Liu ◽  
Jiawei He ◽  
Herbert Ho-Ching Iu
Keyword(s):  
Simulation Model ◽  
High Power ◽  
Pid Control ◽  
Control Method ◽  
Low Voltage ◽  
Synchronous Generator ◽  
High Current ◽  
Feed Forward ◽  
Wide Range ◽  
Output System

The low-voltage and high-current permanent magnet synchronous generator (PMSG), which has characteristics of high power density, small size, and excellent energy saving, is representative of the generators. As a key module of the integrated DC output system of PMSG, the low-voltage and high-current rectifier module is also a nonlinear time-varying system that is readily influenced by parametric changes and external disturbances. Aiming at the shortcomings of traditional control strategies, this paper proposes a novel low-voltage and high-power rectifier module control strategy based on nonlinear feed-forward PID control. The controller has a wide range of environmental applications because of its greater robustness. At the same time, the introduction of feed-forward control shortens regulation time of the system. Therefore, the combination of the two control methods can improve the dynamic performance of the system without influencing the steady-state performance. The simulation model of an integrated rectifier system based on SVPWM control was constructed by Simulink, which can achieve a rated output of 5 V/300 A. At the same time, the simulation model of the controller is constructed and applied to the rectifier output system of a 5 V/300 A synchronous generator to complete the nonlinear feed-forward PID control. Through the comparison between simulation and experiment, it has been proven that the control method can effectively resist the load disturbances and improve the response speed of the system.

scholarly journals Synchronous Generator Rectification System Based on Double Closed-Loop Control of Backstepping and Sliding Mode Variable Structure

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1832
Author(s):  
Jinfeng Liu ◽  
Xin Qu ◽  
Herbert Ho-Ching Iu
Keyword(s):  
Closed Loop ◽  
Control Structure ◽  
Low Voltage ◽  
Sliding Mode ◽  
Variable Structure ◽  
Synchronous Generator ◽  
Closed Loop Control ◽  
High Current ◽  
Loop Control ◽  
Sliding Mode Variable Structure

Low-voltage and high-current direct current (DC) power supplies are essential for aerospace and shipping. However, its robustness and dynamic response need to be optimized further on some special occasions. In this paper, a novel rectification system platform is built with the low-voltage and high-current permanent magnet synchronous generator (PMSG), in which the DC voltage double closed-loop control system is constructed with the backstepping control method and the sliding mode variable structure (SMVS). In the active component control structure of this system, reasonable virtual control variables are set to obtain the overall structural control variable which satisfied the stability requirements of Lyapunov stability theory. Thus, the fast-tracking and the global adjustment of the system are realized and the robustness is improved. Since the reactive component control structure is simple and no subsystem has to be constructed, the SMVS is used to stabilize the system power factor. By building a simulation model and experimental platform of the 5 V/300 A rectification module based on the PMSG, it is verified that the power factor of the system can reach about 98.5%. When the load mutation occurs, the DC output achieves stability again within 0.02 s, and the system fluctuation rate does not exceed 2%.

Model-based model predictive control for a direct-driven permanent magnet synchronous generator with internal and external disturbances

2019 ◽  
Vol 42 (3) ◽  
pp. 586-597 ◽  
Author(s):  
Li Shengquan ◽  
Li Juan ◽  
Tang Yongwei ◽  
Shi Yanqiu ◽  
Cao Wei
Keyword(s):  
Permanent Magnet ◽  
Control Method ◽  
Synchronous Generator ◽  
Critical Issue ◽  
Operating Conditions ◽  
Maximum Power ◽  
External Disturbances ◽  
Permanent Magnet Synchronous Generator ◽  
Model Based ◽  
Wide Range

This paper deals with the critical issue in a direct-driven permanent magnet synchronous generator (PMSG)-based wind energy conversion system (WECS): the rejection of internal and external disturbances, including the uncertainties of external environment, rapid wind speed changes in the original parameters of the generator caused by mutative operating conditions. To track the maximum power, a maximum power point tracking strategy based on model predictive controller (MPC) is proposed with extended state observer (ESO) to attenuate the disturbances and uncertainties. In real application, system inertia and the system parameters vary in a wide range with variations of wind speeds and disturbances, which substantially degrade the maximum power tracking performance of wind turbine. The MPC design should incorporate the available model information into the ESO to improve the control efficiency. Based on this principle, a model-based MPC with ESO control structure is proposed in this paper. Simulation study is conducted to evaluate the performance of the proposed control strategy. It is shown that the effect of internal and external disturbances is compensated in a more effective way compared with the ESO-based MPC approach and traditional proportional integral differential (PID) control method.

Study on MPPT Control of the Single-Stage Grid-Connected Photovoltaic System

2011 ◽  
Vol 383-390 ◽  
pp. 3552-3560
Author(s):  
Yan Wang ◽  
Feng Lan Tian
Keyword(s):  
Fuzzy Control ◽  
Power Factor ◽  
High Power ◽  
Pid Control ◽  
Control Method ◽  
Maximum Power ◽  
Photovoltaic System ◽  
Maximum Power Point ◽  
High Power Factor ◽  
Power Point

The fuzzy control can react to the environment change quickly and keep the photovoltaic system work on its maximum power point all the time. However, the limitation in the fuzzy control itself and the characteristic of self-optimization lead to serious concussion of the system around the maximum power point. Whereas the PID control method is effective in the elimination of concussion and is easy to be realized. To tackle the problem, the fuzzy parameter self-tuning PID control method is adopted in the paper to achieve the MPPT control of PV system. The method can effectively eliminate the concussion around the maximum power point and improve the stability of the system; and achieve grid-connected operation with a high power factor in combination with the harmonic elimination PWM control of inverter. Simulation results show that the scheme has merits of simple structure, high power factor and reliable operation, etc. and is worthwhile to be popularized.

scholarly journals Initial Excitation Issues of Synchronous Generator with VSI Inverter in Varying Rotational Speed Operation

2018 ◽  
Vol 1 (1) ◽  
pp. 377-383 ◽  
Author(s):  
Maciej Kozak
Keyword(s):  
Rotational Speed ◽  
Control Method ◽  
Synchronous Generator ◽  
Theoretical Background ◽  
Nonlinear Dependence ◽  
Voltage Source ◽  
Power Stations ◽  
Wide Range ◽  
Initial Excitation ◽  
Synchronous Generator Excitation

Abstract Synchronous self-excited generators still are and probably will be the most popular 3-phase alternators installed in inland power stations so onboard of seagoing ships. Because of fuel savings and environmental restrictions Diesel, dual-fuel and gas propulsion engines for alternators of wide-range varying revolutions drives are increasingly used. There must be efficient way of creating 3-phase voltages of desired constant parameters ensured when generator produces variable amplitudes and frequencies of voltages because of changing rotational speed. As the control method modified field oriented control widely used with squirrel cage induction machines was chosen. This control method involves decoupling of currents and control voltages to flux and torque components and keeping them in optimal (orthogonal) condition. In order to obtain proper excitation and operation of such generator several factors have to be taken into account. Nonlinear dependence of voltage generated from rotational speed of self-excited synchronous generator is one of the factors that affects initial excitation process thus specific control method while generator startup. Theoretical background of synchronous generator excitation and voltage source inverter adopted FOC control method along with experimental results obtained in laboratory test bench of 5,5 kW generator and conclusions were presented.

Research of LED Lamp Constant Current Driver Software System

2013 ◽  
Vol 760-762 ◽  
pp. 438-442
Author(s):  
Ling Liu
Keyword(s):  
Energy Saving ◽  
High Power ◽  
Control Method ◽  
Constant Current ◽  
Software System ◽  
Level Control ◽  
Wide Range ◽  
High Power Led

The LED lamps replace traditional lamps is the direction of development domestic and abroad.It mainly introduced the LED lamp brightness control method from the aspect of software, then research and production of the LED efficient drive based on a IC chip digital boost constant current regulator, for the actual driving high power LED. It was realized 6 level control on the brightness of LED. The microcontroller controls D/A converter to make the output different voltage values through software programming, and then adjusts the DC/DC conversion circuit current size, finally implements LED brightness control. The experimental makes it possible to have the lamp with adjustable brightness, energy saving, achieve a wide range of voltage, current constant and so on.

scholarly journals Research on the Control Algorithm of Coaxial Rotor Aircraft based on Sliding Mode and PID

Electronics ◽  
2019 ◽  
Vol 8 (12) ◽  
pp. 1428 ◽  
Author(s):  
Yiran Wei ◽  
Han Chen ◽  
Kewei Li ◽  
Hongbin Deng ◽  
Dongfang Li
Keyword(s):  
Simulation Model ◽  
Dynamic Simulation ◽  
Pid Control ◽  
Control Algorithm ◽  
Control Method ◽  
Sliding Mode ◽  
Three Dimensional ◽  
Three Dimensional Model ◽  
Coaxial Rotor ◽  
Dynamic Simulation Model

In this paper, a sliding mode PID control algorithm of coaxial rotor aircraft has been proposed. After that, Adams/MATLAB simulation and experiments were used for verification. The results show that this control method can achieve satisfactory results. Firstly, when considering of the aerodynamic interaction between upper and lower rotor, it is difficult to establish an accurate mathematical model, and the aerodynamic interference between the upper and lower rotors and the brandishing motion of the blades are calculated by using the blade element theory and the dynamic inflow model, and the other parts which are not accurately modeled are compensated for by the control algorithm. Secondly, the sliding mode control algorithm and the PID control algorithm are combined to control the attitude of the aircraft. Among them, the PID control algorithm is used to establish the relationship between attitude and position, so that the aircraft can fly and hover more steadily. Thirdly, the three-dimensional model of the aircraft was imported into Adams to establish the dynamic simulation model. Then, the controller was established in Simulink, after that, and then the controller and the dynamic simulation model were combined for joint simulation. And the sliding mode PID control algorithm has been compared with traditional PID control algorithm through the simulation. Finally, the sliding mode PID control algorithm is verified by the experiment compared with the traditional PID algorithm. The results verify the superiority and practicability of the control method designed in this paper.

scholarly journals A Novel VSG-Based Accurate Voltage Control and Reactive Power Sharing Method for Islanded Microgrids

2019 ◽  
Vol 11 (23) ◽  
pp. 6666 ◽  
Author(s):  
Bowen Zhou ◽  
Lei Meng ◽  
Dongsheng Yang ◽  
Zhanchao Ma ◽  
Guoyi Xu
Keyword(s):  
Reactive Power ◽  
Control Method ◽  
Low Voltage ◽  
Voltage Drop ◽  
Reference Value ◽  
Voltage Control ◽  
Synchronous Generator ◽  
Stability Control ◽  
Control Area ◽  
Power Sharing

Islanded microgrids (IMGs) are more likely to be perturbed by renewable generation and load demand fluctuation, thus leading to system instability. The virtual synchronous generator (VSG) control has become a promising method in the microgrids stability control area for its inertia-support capability. However, the improper power sharing and inaccurate voltage control problems of the distributed generations (DGs) in microgrids still has not been solved with a unified method. This paper proposes a novel VSG equivalent control method named Imitation Excitation Control (IEC). In this method, a multi-objective control strategy for voltage and reactive power in a low voltage grid that considers a non-negligible resistance to reactance ratio (R/X) is proposed. With the IEC method, the voltage drop across feeders is compensated, thus the terminal voltage of each inverter will be regulated, which will effectively stabilize the PCC (point of common coupling) voltage and inhibit the circular current. Meanwhile, this method can realize accurate reactive power tracking the reference value, making it accessible for reactive power scheduling. What is more, the reasonability of the IEC model, namely the equivalent mechanical characteristic and transient process inertia support between VSGs and conventional synchronous generators (SG), is illustrated in this paper. Moreover, steady-state stability is proved by the small-signal modeling method, and the energy required by inertia support is given. Finally, the simulation result validates the effectiveness of the proposed method, and it is also demonstrated that the proposed method outperforms the conventional droop control method.

Sign in / Sign up

Export Citation Format

Share Document