scholarly journals Reliability Evaluation of Photovoltaic System Considering Inverter Thermal Characteristics

Electronics ◽  
2021 ◽  
Vol 10 (15) ◽  
pp. 1763
Author(s):  
Tianyu Li ◽  
Shengyu Tao ◽  
Ruixiang Zhang ◽  
Zhixing Liu ◽  
Lei Ma ◽  
...  
Keyword(s):  
Power Generation ◽  
Failure Rate ◽  
Power Plants ◽  
Great Influence ◽  
Thermal Characteristics ◽  
Reliability Evaluation ◽  
Variable Environment ◽  
Power Generation Systems ◽  
The Impact ◽  
Pv Power Generation

The reliable operation of photovoltaic (PV) power generation systems is related to the security and stability of the power grid and is the focus of current research. At present, the reliability evaluation of PV power generation systems is mostly calculated by applying the standard failure rate of each component, ignoring the impact of thermal environment changes on the failure rate. This paper will use the fault tree theory to establish the reliability assessment method of PV power plants, model the PV power plants working in the variable environment through the hardware-in-the-loop simulation system, and analyze the influence of the thermal characteristics of the inverter’s key components on the reliability of the PV power plant. Studies have shown that the overall reliability of bus capacitors, inverters, and PV power plants is reduced by 18.4%, 30%, and 18.7%, respectively, compared to when the thermal characteristics of bus capacitors are not considered. It can be seen that thermal attenuation has a great influence on the reliability of the PV power generation system.

scholarly journals A Study on the Improvement of Efficiency by Detection Solar Module Faults in Deteriorated Photovoltaic Power Plants

2021 ◽  
Vol 11 (2) ◽  
pp. 727 ◽  
Author(s):  
Myeong-Hwan Hwang ◽  
Young-Gon Kim ◽  
Hae-Sol Lee ◽  
Young-Dae Kim ◽  
Hyun-Rok Cha
Keyword(s):  
Power Generation ◽  
Power Plants ◽  
Detection System ◽  
Failure Detection ◽  
Solar Module ◽  
Thermal Images ◽  
Power Stations ◽  
Photovoltaic Power ◽  
Manufacturing Technologies ◽  
Pv Power Generation

In recent years, photovoltaic (PV) power generation has attracted considerable attention as a new eco-friendly and renewable energy generation technology. With the recent development of semiconductor manufacturing technologies, PV power generation is gradually increasing. In this paper, we analyze the types of defects that form in PV power generation panels and propose a method for enhancing the productivity and efficiency of PV power stations by determining the defects of aging PV modules based on their temperature, power output, and panel images. The method proposed in the paper allows the replacement of individual panels that are experiencing a malfunction, thereby reducing the output loss of solar power generation plants. The aim is to develop a method that enables users to immediately check the type of failures among the six failure types that frequently occur in aging PV panels—namely, hotspot, panel breakage, connector breakage, busbar breakage, panel cell overheating, and diode failure—based on thermal images by using the failure detection system. By comparing the data acquired in the study with the thermal images of a PV power station, efficiency is increased by detecting solar module faults in deteriorated photovoltaic power plants.

Potential Impacts of Net-Zero Energy Buildings With Distributed Photovoltaic (PV) Power Generation on the Electrical Grid

2018 ◽  
Author(s):  
Dongsu Kim ◽  
Heejin Cho ◽  
Rogelio Luck
Keyword(s):  
Power Generation ◽  
Electricity Demand ◽  
Office Buildings ◽  
Office Building ◽  
Electrical Grid ◽  
Net Zero ◽  
Demand Profile ◽  
The Impact ◽  
Pv Power Generation ◽  
The U.S

This study evaluates potential aggregate effects of net-zero energy building (NZEB) implementations on the electrical grid in simulation-based analysis. Many studies have been conducted on how effective NZEB designs can be achieved, however the potential impact of NZEBs have not been explored sufficiently. As significant penetration of NZEBs occurs, the aggregated electricity demand profile of the buildings on the electrical grid would experience dramatic changes. To estimate the impact of NZEBs on the electrical grid, a simulation-based study of an office building with a grid-tied PV power generation system is conducted. This study assumes that net-metering is available for NZEBs such that the excess on-site PV generation can be fed to the electrical grid. The impact of electrical energy storage (EES) within NZEBs on the electrical grid is also considered in this study. Finally, construction weighting factors of the office building type in U.S. climate zones are used to estimate the number of national office buildings. In order to consider the adoption of NZEBs in the future, this study examines scenarios with 20%, 50%, and 100% of the U.S. office building stock are composed of NZEBs. Results show that annual electricity consumption of simulated office buildings in U.S. climate locations includes the range of around 85 kWh/m2-year to 118 kWh/m2-year. Each simulated office building employs around 242 kWp to 387 kWp of maximum power outputs in the installation of on-site PV power systems to enable NZEB balances. On a national scale, the daily on-site PV power generation within NZEBs can cover around 50% to 110% of total daily electricity used in office buildings depending on weather conditions. The peak difference of U.S. electricity demand typically occurs when solar radiation is at its highest. The peak differences from the actual U.S. electricity demand on the representative summer day show 9.8%, 4.9%, and 2.0% at 12 p.m. for 100%, 50%, and 20% of the U.S. NZEB stocks, respectively. Using EES within NZEBs, the peak differences are reduced and shifted from noon to the beginning of the day, including 7.7%, 3.9%, and 1.5% for each percentage U.S. NZEB stock. NZEBs tend to create the significant curtailment of the U.S. electricity demand profile, typically during the middle of the winter day. The percentage differences at a peak point (12 p.m.) are 8.3%, 4.2%, and 1.7% for 100%, 50%, and 20% of the U.S. NZEB stocks, respectively. However, using EES on the representative winter day can flatten curtailed electricity demand curves by shifting the peak difference point to the beginning and the late afternoon of the day. The shifted peak differences show 7.4%, 3.7%, and 1.5% at 9 a.m. for three U.S. NZEB stock scenarios, respectively.

scholarly journals Effect of Grid Instability on Power Generation System's Reliability

2020 ◽  
pp. 27-37
Author(s):  
Joseph Benedict Bassey ◽  
Isaac F. Odesola
Keyword(s):  
Power Generation ◽  
Power Plant ◽  
Failure Rate ◽  
System Reliability ◽  
Power Distribution ◽  
Power Plants ◽  
Time To Failure ◽  
Generation System ◽  
Reliability Indices ◽  
Mean Time

Aims: Reliability assessment of power generation system may be performed with the concept of system adequacy, security or both. Grid being a major component in the power distribution chain is seen to have some influence on the state of the generation system reliability because of the perturbation that may arise from it. In this study, the generation system reliability is evaluated using both the system adequacy and security concept. Study Design: To capture the system security problems attributed to grid disturbance, the generation system is structured into two component systems (1 - generation component and 2 - transmission component) with a series arrangement. Methodology: The reliability indices such as, mean time to failure, mean time to repair, failure rate and repair rate are assessed on component bases and with respect to the entire generation system. Results: The effect of failure rate of the transmission component on the entire generation system failure rate was evaluated as 66.25%, 55.55%, 33.33%, 55.00% and 35.72% in year 2013, 2014, 2017 2018 and 2019 respectively for FIPL Power Plant and 52.94%, 82.35%, 61.38% and 100% effect was evaluated in the year 2016, 2017, 2018 and 2019 respectively for GT5 of Omoku Power Plant. Conclusion: These results showed that there is a significant influence of grid disturbances on the reliability state of the two gas turbine power plants in Nigeria. Measures on possible reliability state improvement of the power generation systems were suggested to include training and retraining of technical personnel on the management of major equipment in the generation and transmission stations. 

Dendrobiomass Based Power Generation - A PCS (Production to Consumption System) Approach in Tamil Nadu, India

2013 ◽  
Vol 36 (1) ◽  
pp. 31-40
Author(s):  
P. Durairasu ◽  
K. Parthiban
Keyword(s):  
Power Generation ◽  
Supply Chain ◽  
Tamil Nadu ◽  
Power Plants ◽  
The State ◽  
Energy Resources ◽  
Contract Farming ◽  
Research Institutes ◽  
Consumption System ◽  
The Impact

Bioresources particularly the dendro energy resources play significant role in meeting the energy requirement of both domestic and industrial requirements. With the improvement in the technology of conversion and utilization over the last three decades dendro energy resources have reached a status of being considered as commercial energy resources and are prioritized for use in decentralized biomass based power generation projects. However, many biomass based power plants started in the country in general and the state of Tamil Nadu in particular have exhibited various constraints which resulted in uncertained power generation. The reasons are numerous but the key factors are non-availability of quality (High Calorific Value) raw material, fragmented land use pattern, lack of site specific HDSR models, unorganized supply chain and lack of partnership among various stake holders. Against this back drop, the current project has conceived a concept of consortium mode dendro energy farming by comprehensively involving all levels of stake holders viz., research institutes for technology development for dendro energy resources, biomass power plant for assuring minimum support price and to facilitate contract farming, the farmers to grow energy trees identified by the research institutes and adopt precision silvicultural technology and lastly the financial institution to provide credit facilities to energy plantation growers. This consortium has been successfully introduced and implemented in Tamil Nadu in association with Auromira Energy Company Limited which have three Biomass Power Plants with an installed capacity of 35.5 MW. Through this consortium, the research institute has identified high yielding energy rich species and developed HDSR models suitable for varied agroclimatic zones. This consortium has introduced contract dendro energy farming in the state following farm forestry and captive model approaches. The various contract farming models land lease, tree share and income share models have been introduced through this consortium to benefit the growers and the biomass based power plants. In a holistic perspective the consortium has reduced the impact of multipartite supply chain in to a bi-partite, tri-partite and quad partite model supply chain thereby helped to augment the Production to Consumption System (PCS). This model can suitably be modified to meet the wood requirement of other wood based industries. This paper discusses the constraints and the interventions made to augment dendrobioresources to generate power which are from clean and green bioresources.

TECHNO-ECONOMIC ANALYSIS OF IGCC POWER GENERATION SYSTEMS BASED ON FLUIDIZED BED GASIFIERS

1999 ◽  
Vol 23 (1B) ◽  
pp. 213-223
Author(s):  
A. Ong’iro ◽  
V.I. Ugursal ◽  
A.M. Al Taweel
Keyword(s):  
Power Generation ◽  
Fluidized Bed ◽  
Power Plants ◽  
Economic Aspects ◽  
Electricity Cost ◽  
Combined Cycles ◽  
Integrated Gasification ◽  
Pollution Emissions ◽  
Power Generation Systems

A computerized techno-economic model that can be used to predict the thermal, environmental and economic aspects of integrated gasification combined cycles (IGCC) using fluidized bed gasifiers was developed. A brief description of the model is presented and representative applications of the model are demonstrated with a case study. The results verify the favourable characteristics of IGCC systems (i.e. high thermal efficiency, low levelized unit electricity cost, and reduced pollution emissions) and illustrate the effect of various parameters on the performance of IGCC power plants. Models for IGCC with moving bed and entrained bed gasifiers are presented elsewhere.

Optimizing Selection of Appropriate Power Generation Systems in Indonesia By Using Distance Based Approach Method

2004 ◽  
Vol 126 (1) ◽  
pp. 63-71 ◽  
Author(s):  
Anugerah Widiyanto ◽  
Seizo Kato ◽  
Naoki Maruyama
Keyword(s):  
Power Generation ◽  
Electric Power ◽  
Power Plants ◽  
Quantitative Model ◽  
Energy Sources ◽  
Matrix Operations ◽  
Electric Power Sector ◽  
Energy Economy ◽  
Approach Method ◽  
Power Generation Systems

A deterministic quantitative model has been developed to compare the technical, economical and environmental feature of various electric power generating plants. The model, which is based on matrix operations, is used in evaluating the various aspects of energy sources available for electricity generation systems in a developing country. Several energy sources which could be considered for production of electricity to meet current and future electricity demands have been chosen. These will include fossil fuel fired, nuclear, and natural-renewable energy power plants. And, a set of criteria for optimized selection includes five area of concerns: energy economy, energy security, environmental protection, socio-economic development and technological aspects for the electric power generations. The model developed in this study is applied to the Indonesian’s electric power sector development. Most of the data required are obtained from various sources related to power industry in Indonesia, such as the electricity generating authority of Indonesia (Perusahaan Listrik Negara, PLN), Government of Indonesia, World Bank, Asian Development Bank, United Nations, and other sources, both in published and public domains. The result of this study will be a ranking of energy sources for Indonesia power generation systems based on the Euclidean composite distance of each alternative to the designated optimal source of energy.

scholarly journals Techno-economic analysis and modelling of the feasibility of wind energy in Kuwait

2022 ◽  
Vol 7 ◽  
pp. 9
Author(s):  
Seyed Amir Kaboli ◽  
Reyhaneh Nazmabadi
Keyword(s):  
Power Generation ◽  
Economic Analysis ◽  
Wind Energy ◽  
Wind Turbine ◽  
Wind Power ◽  
Power Plants ◽  
Clean Energy ◽  
Wind Power Generation ◽  
Generation Capacity ◽  
The Impact

There continues to be significant attention and investment in wind power generation, which can supply a high percentage of the global demand for renewable energy if harvested efficiently. The research study is based on techno-economic analysis of the feasibility of implementing wind power generation in Kuwait with a power generation capacity of 105 MW based on 50 wind turbines, which has a major requirement for clean energy. The study focused on three main areas of analysis and numerical modeling using the RETScreen software tool. The first area involved evaluating the performance and efficacy of generating wind power by collecting, analyzing, and modeling data on observed wind levels, wind turbine operation, and wind power generation. The second area comprised an environmental impact review to assess the environmental benefits of implementing wind power. The third area involved economic analysis of installing wind power in Kuwait. The analysis was undertaken to assess the energy recovery time for wind energy and determine the mitigation of global warming and pollution levels, the decrease of toxic emissions, and any cost savings from implementing clean energy systems in Kuwait. Additionally, sensitivity analysis was undertaken to determine the impact of certain variables in the modeling process. The results are used to estimate that the energy price would be $0.053 per kWh for a power generation capacity of 105 MWh based on an initial cost of $168 million and O&M of $5 million for 214,000 MWh of electricity exported to the grid. Moreover, the wind turbine farm will potentially avoid the emission of approximately 1.8 million tonnes of carbon dioxide per year, thereby saving approximately $9 million over 20 years spent installing carbon capture systems for conventional power plants. The wind farm containing a simple wind turbine is estimated to have a payback period of 9.1 years.

scholarly journals Recent Advances in Ammonia Combustion Technology in Thermal Power Generation System for Carbon Emission Reduction

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5604
Author(s):  
Hookyung Lee ◽  
Minjung Lee
Keyword(s):  
Power Generation ◽  
Gas Turbines ◽  
Power Plants ◽  
Thermal Power ◽  
Hydrogen Energy ◽  
Application Range ◽  
Combustion Technology ◽  
Power Generation System ◽  
Power Generation Systems

With the formation of an international carbon-neutral framework, interest in reducing greenhouse gas emissions is increasing. Ammonia is a carbon-free fuel that can be directly combusted with the role of an effective hydrogen energy carrier, and its application range is expanding. In particular, as research results applied to power generation systems such as gas turbines and coal-fired power plants have been reported, the technology to use them is gradually being advanced. In the present study, starting with a fundamental combustion research case conducted to use ammonia as a fuel, the application research case for gas turbines and coal-fired power plants was analyzed. Finally, we report the results of the ammonia-air burning flame and pulverized coal-ammonia-air co-fired research conducted at the authors’ research institute.

Optimization of Waste Heat Recovery Power Generation System Applied in Ferroalloy Industry

2011 ◽  
Author(s):  
Yufeng Wang ◽  
Shuai Zhao ◽  
Shien Hui ◽  
Qinxin Zhao ◽  
Qulan Zhou
Keyword(s):  
Power Generation ◽  
Heat Recovery ◽  
Waste Heat Recovery ◽  
Waste Heat ◽  
Ferroalloy Production ◽  
Thermodynamic Models ◽  
Pressure System ◽  
Waste Gas ◽  
Power Generation Systems ◽  
The Impact

During ferroalloy production, a large quantity of waste gas can be utilized to generate steam and electric power. In this paper, 4 detailed thermodynamic models of single-pressure (SP) and dual-pressure (DP) waste heat recovery power generation systems are presented, to analyze the impact of the steam pressure, steam temperature and pinch temperature difference on power generating capacity. By comparing the performance of typical systems, more reasonable thermodynamic models and their parameters are proposed. It is found that the power generation capacity of dual-pressure system is higher than that of the single-pressure system, but SP system is much simpler. Using superheated steam in deaerator reduces the efficiency of heat recovery power generation systems by 1.8%. The fluctuation of waste gas source affects the power generation greatly. It should be considered when more reasonable ranges for the main parameters are required. With the improvement of thermodynamic system and parameter optimization, the gross power is increased by 15% for SP system and 17% for DP system, corresponding to the steam parameters of 3.0MPa/400°C and 6.0MPa/400°C.

Sign in / Sign up

Export Citation Format

Share Document