scholarly journals A Real-Time Detection Algorithm for Kiwifruit Defects Based on YOLOv5

Electronics ◽  
2021 ◽  
Vol 10 (14) ◽  
pp. 1711
Author(s):  
Jia Yao ◽  
Jiaming Qi ◽  
Jie Zhang ◽  
Hongmin Shao ◽  
Jia Yang ◽  
...  
Keyword(s):  
Real Time ◽  
Defect Detection ◽  
Detection System ◽  
Flaw Detection ◽  
Detection Algorithm ◽  
Small Object ◽  
Original Algorithm ◽  
Detection Algorithms ◽  
Model Based ◽  
Real Time Detection

Defect detection is the most important step in the postpartum reprocessing of kiwifruit. However, there are some small defects difficult to detect. The accuracy and speed of existing detection algorithms are difficult to meet the requirements of real-time detection. For solving these problems, we developed a defect detection model based on YOLOv5, which is able to detect defects accurately and at a fast speed. The main contributions of this research are as follows: (1) a small object detection layer is added to improve the model’s ability to detect small defects; (2) we pay attention to the importance of different channels by embedding SELayer; (3) the loss function CIoU is introduced to make the regression more accurate; (4) under the prerequisite of no increase in training cost, we train our model based on transfer learning and use the CosineAnnealing algorithm to improve the effect. The results of the experiment show that the overall performance of the improved network YOLOv5-Ours is better than the original and mainstream detection algorithms. The [email protected] of YOLOv5-Ours has reached 94.7%, which was an improvement of nearly 9%, compared to the original algorithm. Our model only takes 0.1 s to detect a single image, which proves the effectiveness of the model. Therefore, YOLOv5-Ours can well meet the requirements of real-time detection and provides a robust strategy for the kiwi flaw detection system.

scholarly journals Robust Real-Time Detection of Laparoscopic Instruments in Robot Surgery Using Convolutional Neural Networks with Motion Vector Prediction

2019 ◽  
Vol 9 (14) ◽  
pp. 2865 ◽  
Author(s):  
Kyungmin Jo ◽  
Yuna Choi ◽  
Jaesoon Choi ◽  
Jong Woo Chung
Keyword(s):  
Neural Networks ◽  
Real Time ◽  
Convolutional Neural Networks ◽  
Detection System ◽  
Motion Vector ◽  
Detection Algorithm ◽  
Surgical Instruments ◽  
The Mean ◽  
Real Time Detection ◽  
Motion Vector Prediction

More than half of post-operative complications can be prevented, and operation performances can be improved based on the feedback gathered from operations or notifications of the risks during operations in real time. However, existing surgical analysis methods are limited, because they involve time-consuming processes and subjective opinions. Therefore, the detection of surgical instruments is necessary for (a) conducting objective analyses, or (b) providing risk notifications associated with a surgical procedure in real time. We propose a new real-time detection algorithm for detection of surgical instruments using convolutional neural networks (CNNs). This algorithm is based on an object detection system YOLO9000 and ensures continuity of detection of the surgical tools in successive imaging frames based on motion vector prediction. This method exhibits a constant performance irrespective of a surgical instrument class, while the mean average precision (mAP) of all the tools is 84.7, with a speed of 38 frames per second (FPS).

scholarly journals An Improved MB-LBP Defect Recognition Approach for the Surface of Steel Plates

2019 ◽  
Vol 9 (20) ◽  
pp. 4222 ◽  
Author(s):  
Yang Liu ◽  
Ke Xu ◽  
Jinwu Xu
Keyword(s):  
Real Time ◽  
Surface Defects ◽  
Recognition Accuracy ◽  
Detection System ◽  
Detection Algorithm ◽  
Steel Plates ◽  
Detection Accuracy ◽  
Scale Invariant ◽  
Speeded Up Robust Features ◽  
Real Time Detection

The detection of surface defects is very important for the quality improvement of steel plates. In actual production, as the steel plate production line runs faster, the steel surface defect detection algorithm is required to meet the requirements of real-time detection (less than 100 ms/image), and the detection accuracy is improved (at least 90%). In this paper, an improved multi-block local binary pattern (LBP) algorithm is proposed. This algorithm not only has the simplicity and efficiency of the LBP algorithm, but also finds a suitable scale to describe the defect features by changing the block sizes, thus ensuring high recognition accuracy. The experiment proves that the method satisfies the requirements of online real-time detection in terms of speed (63 ms/image), and surpasses the widely-used scale invariant feature transform (SIFT), speeded up robust features (SURF), gray-level co-occurrence matrix (GLCM), and LBP algorithms in recognition accuracy (94.30%), which prove that the MB-LBP has practical application value in an online real-time detection system.

Real-time Detection of Aortic Valve in Echocardiography using Convolutional Neural Networks

2020 ◽  
Vol 16 (5) ◽  
pp. 584-591 ◽  
Author(s):  
Muhammad Hanif Ahmad Nizar ◽  
Chow Khuen Chan ◽  
Azira Khalil ◽  
Ahmad Khairuddin Mohamed Yusof ◽  
Khin Wee Lai
Keyword(s):  
Neural Network ◽  
Neural Networks ◽  
Heart Disease ◽  
Aortic Valve ◽  
Real Time ◽  
Convolutional Neural Networks ◽  
Valvular Heart Disease ◽  
Detection System ◽  
Processing Unit ◽  
Real Time Detection

Background: Valvular heart disease is a serious disease leading to mortality and increasing medical care cost. The aortic valve is the most common valve affected by this disease. Doctors rely on echocardiogram for diagnosing and evaluating valvular heart disease. However, the images from echocardiogram are poor in comparison to Computerized Tomography and Magnetic Resonance Imaging scan. This study proposes the development of Convolutional Neural Networks (CNN) that can function optimally during a live echocardiographic examination for detection of the aortic valve. An automated detection system in an echocardiogram will improve the accuracy of medical diagnosis and can provide further medical analysis from the resulting detection. Methods: Two detection architectures, Single Shot Multibox Detector (SSD) and Faster Regional based Convolutional Neural Network (R-CNN) with various feature extractors were trained on echocardiography images from 33 patients. Thereafter, the models were tested on 10 echocardiography videos. Results: Faster R-CNN Inception v2 had shown the highest accuracy (98.6%) followed closely by SSD Mobilenet v2. In terms of speed, SSD Mobilenet v2 resulted in a loss of 46.81% in framesper- second (fps) during real-time detection but managed to perform better than the other neural network models. Additionally, SSD Mobilenet v2 used the least amount of Graphic Processing Unit (GPU) but the Central Processing Unit (CPU) usage was relatively similar throughout all models. Conclusion: Our findings provide a foundation for implementing a convolutional detection system to echocardiography for medical purposes.

Structural Design of Intrusion Detection System

2014 ◽  
Vol 530-531 ◽  
pp. 705-708
Author(s):  
Yao Meng
Keyword(s):  
Intrusion Detection ◽  
Structural Design ◽  
Intrusion Detection System ◽  
Detection System ◽  
Algorithm Design ◽  
Detection Algorithm ◽  
Attack Detection ◽  
Detection Algorithms ◽  
Defense Systems ◽  
Ddos Attack Detection

This paper first engine starting defense from Intrusion Detection, Intrusion detection engine analyzes the hardware platform, the overall structure of the technology and the design of the overall structure of the plug, which on the whole structure from intrusion defense systems were designed; then described in detail improved DDOS attack detection algorithm design thesis, and the design of anomaly detection algorithms.

scholarly journals Computer-Aided Colon Polyp Detection on High Resolution Colonoscopy Using Transfer Learning Techniques

Sensors ◽  
2021 ◽  
Vol 21 (16) ◽  
pp. 5315
Author(s):  
Chia-Pei Tang ◽  
Kai-Hong Chen ◽  
Tu-Liang Lin
Keyword(s):  
Real Time ◽  
Transfer Learning ◽  
Early Recognition ◽  
Detection System ◽  
Colon Polyp ◽  
Colon Polyps ◽  
Polyp Detection ◽  
Detection Model ◽  
Real Time Detection ◽  
Polyp Type

Colonoscopies reduce the incidence of colorectal cancer through early recognition and resecting of the colon polyps. However, the colon polyp miss detection rate is as high as 26% in conventional colonoscopy. The search for methods to decrease the polyp miss rate is nowadays a paramount task. A number of algorithms or systems have been developed to enhance polyp detection, but few are suitable for real-time detection or classification due to their limited computational ability. Recent studies indicate that the automated colon polyp detection system is developing at an astonishing speed. Real-time detection with classification is still a yet to be explored field. Newer image pattern recognition algorithms with convolutional neuro-network (CNN) transfer learning has shed light on this topic. We proposed a study using real-time colonoscopies with the CNN transfer learning approach. Several multi-class classifiers were trained and mAP ranged from 38% to 49%. Based on an Inception v2 model, a detector adopting a Faster R-CNN was trained. The mAP of the detector was 77%, which was an improvement of 35% compared to the same type of multi-class classifier. Therefore, our results indicated that the polyp detection model could attain a high accuracy, but the polyp type classification still leaves room for improvement.

Development of a real-time machine vision system for functional textile fabric defect detection using a deep YOLOv4 model

2021 ◽  
pp. 004051752110342
Author(s):  
Sifundvolesihle Dlamini ◽  
Chih-Yuan Kao ◽  
Shun-Lian Su ◽  
Chung-Feng Jeffrey Kuo
Keyword(s):  
Machine Vision ◽  
Real Time ◽  
Defect Detection ◽  
Data Augmentation ◽  
Detection System ◽  
Vision System ◽  
Good Precision ◽  
Machine Vision System ◽  
Time Machine ◽  
Textile Fabric

We introduce a real-time machine vision system we developed with the aim of detecting defects in functional textile fabrics with good precision at relatively fast detection speeds to assist in textile industry quality control. The system consists of image acquisition hardware and image processing software. The software we developed uses data preprocessing techniques to break down raw images to smaller suitable sizes. Filtering is employed to denoise and enhance some features. To generalize and multiply the data to create robustness, we use data augmentation, which is followed by labeling where the defects in the images are labeled and tagged. Lastly, we utilize YOLOv4 for localization where the system is trained with weights of a pretrained model. Our software is deployed with the hardware that we designed to implement the detection system. The designed system shows strong performance in defect detection with precision of [Formula: see text], and recall and [Formula: see text] scores of [Formula: see text] and [Formula: see text], respectively. The detection speed is relatively fast at [Formula: see text] fps with a prediction speed of [Formula: see text] ms. Our system can automatically locate functional textile fabric defects with high confidence in real time.

Real-time Detection System of Electrical Disturbances for Remote Communication Stations and Smart Grid

2017 ◽  
Vol 15 (10) ◽  
pp. 1894-1900
Author(s):  
Wesley Natanael Gallo ◽  
Tales Heimfarth ◽  
Danton Diego Ferreira ◽  
Thais Martins Mendes
Keyword(s):  
Smart Grid ◽  
Real Time ◽  
Detection System ◽  
Remote Communication ◽  
Real Time Detection
Sign in / Sign up

Export Citation Format

Share Document