scholarly journals Performance Evaluation of Solar PV Inverter Controls for Overvoltage Mitigation in MV Distribution Networks

Electronics ◽  
2021 ◽  
Vol 10 (12) ◽  
pp. 1456
Author(s):  
Dilini Almeida ◽  
Jagadeesh Pasupuleti ◽  
Shangari K. Raveendran ◽  
M. Reyasudin Basir Khan
Keyword(s):  
Network Performance ◽  
Reactive Power ◽  
Distribution Networks ◽  
Voltage Regulation ◽  
Operating Conditions ◽  
Support Network ◽  
Control Technique ◽  
Solar Pv ◽  
Pv Inverter ◽  
Fixed Power

The incorporation of real and reactive power control of solar photovoltaic (PV) inverters has received significant interest as an onsite countermeasure to the voltage rise problem. This paper presents a comprehensive analysis of the involvement of active power curtailment and reactive power absorption techniques of solar PV inverters for voltage regulation in medium voltage (MV) distribution networks. A case study has been conducted for a generic MV distribution network in Malaysia, demonstrating the effectiveness of fixed power factor control, Volt–Var, and Volt–Watt controls in mitigating overvoltage issues that have arisen due to the extensive integration of solar PV systems. The results revealed that the incorporation of real and reactive power controls of solar PV inverters aids in successfully mitigating overvoltage issues and support network operating conditions. Furthermore, the comparative analysis demonstrated the importance of employing the most appropriate control technique for improved network performance.

scholarly journals Using Energy Storage Inverters of Prosumer Installations for Voltage Control in Low-Voltage Distribution Networks

Energies ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 1121
Author(s):  
Rozmysław Mieński ◽  
Przemysław Urbanek ◽  
Irena Wasiak
Keyword(s):  
Energy Storage ◽  
Control Strategy ◽  
Reactive Power ◽  
Low Voltage ◽  
Storage System ◽  
Distribution Networks ◽  
Energy Storage System ◽  
Voltage Regulation ◽  
Active Power ◽  
Total Power

The paper includes the analysis of the operation of low-voltage prosumer installation consisting of receivers and electricity sources and equipped with a 3-phase energy storage system. The aim of the storage application is the management of active power within the installation to decrease the total power exchanged with the supplying network and thus reduce energy costs borne by the prosumer. A solution for the effective implementation of the storage system is presented. Apart from the active power management performed according to the prosumer’s needs, the storage inverter provides the ancillary service of voltage regulation in the network according to the requirements of the network operator. A control strategy involving algorithms for voltage regulation without prejudice to the prosumer’s interest is described in the paper. Reactive power is used first as a control signal and if the required voltage effect cannot be reached, then the active power in the controlled phase is additionally changed and the Energy Storage System (ESS) loading is redistributed in phases in such a way that the total active power set by the prosumer program remains unchanged. The efficiency of the control strategy was tested by means of a simulation model in the PSCAD/EMTDC program. The results of the simulations are presented.

Adaptive SRF-PLL Based Voltage and Frequency Control of Hybrid Standalone WECS with PMSG-BESS

2018 ◽  
Vol 19 (6) ◽  
Author(s):  
Anjana Jain ◽  
R. Saravanakumar ◽  
S. Shankar ◽  
V. Vanitha
Keyword(s):  
Reactive Power ◽  
Frequency Control ◽  
Storage System ◽  
Synchronous Generator ◽  
Energy Storage System ◽  
Voltage Regulation ◽  
Operating Conditions ◽  
Voltage Source ◽  
Voltage Source Converter ◽  
Control Scheme

Abstract The variable-speed Permanent Magnet Synchronous Generator (PMSG) based Wind Energy Conversion System (WECS) attracts the maximum power from wind, but voltage-regulation and frequency-control of the system in standalone operation is a challenging task A modern-control-based-tracking of power from wind for its best utilization is proposed in this paper for standalone PMSG based hybrid-WECS comprising Battery Energy Storage System (BESS). An Adaptive Synchronous Reference Frame Phase-Locked-Loop (SRF-PLL) based control scheme for load side bi-directional voltage source converter (VSC) is presented for the system. MATLAB/Simulink model is developed for simulation study for the proposed system and the effectiveness of the controller for bi-directional-converter is discussed under different operating conditions: like variable wind-velocity, sudden load variation, and load unbalancing. Converter control scheme enhances the power smoothening, supply-load power-matching. Also it is able to regulate the active & reactive power from PMSG-BESS hybrid system with control of fluctuations in voltage & frequency with respect to varying operating conditions. Proposed controller successfully offers reactive-power-compensation, harmonics-reduction, and power-balancing. The proposed scheme is based on proportional & integral (PI) controller. Also system is experimentally validated in the laboratory-environment and results are presented here.

scholarly journals Power factor control of PV generators in local distribution networks using fuzzy logic concept

2018 ◽  
Vol 7 (2.28) ◽  
pp. 362
Author(s):  
Raed A. Shalwala
Keyword(s):  
Fuzzy Logic ◽  
Control System ◽  
Power Factor ◽  
Fuzzy Logic Control ◽  
Reactive Power ◽  
Distribution Network ◽  
Voltage Control ◽  
Distribution Networks ◽  
Voltage Regulation ◽  
Logic Control

One of the most important operational requirements for any electrical power network for both distribution and transmission level is voltage control. Many studies have been carried out to improve or develop new voltage control techniques to facilitate safe connection of distributed generation. In Saudi Arabia, due to environmental, economic and development perspectives, a wide integration of photovoltaic (PV) genera-tion in distribution network is expected in the near future. This development in the network may cause voltage regulation problems due to the interaction with the existing conventional control system. In a previous paper, a control system has been described using a fuzzy logic control to set the on-line tap changer for the primary substation. In this paper a new control system is proposed for controlling the power factor of individual PV invertors based on observed correlation between net active and reactive power at each connection. A fuzzy logic control has been designed to alter the power factor for the remote invertors from the secondary substation to keep the feeder voltage within the permissible limits. In order to confirm the validity of the proposed method, simulations are carried out for a realistic distribution network with real data for load and solar radiation. Results showing the performance of the new control method are presented and discussed.  

scholarly journals Equivalent Sliding Mode Controller for Stability of DC Microgrid

2021 ◽  
Vol 12 (1) ◽  
pp. 23
Author(s):  
Muhammad Rashad ◽  
Uzair Raoof ◽  
Nazam Siddique ◽  
Bilal Ashfaq Ahmed
Keyword(s):  
Reactive Power ◽  
Sliding Mode ◽  
Voltage Regulation ◽  
Pi Controller ◽  
Operating Conditions ◽  
Dc Microgrid ◽  
Dc Microgrids ◽  
Central Controller ◽  
The Stability ◽  
Decentralized Architecture

DC microgrids are gaining popularity due to their lack of reactive power compensation, frequency synchronization, and skin effect problems. However, DC microgrids are not exempted from stability issues. The stability of DC microgrids based on decentralized architecture is presented in this paper. Centralized architecture can degrade system performance and reliability due to the failure of a single central controller. Droop with proportional integral (PI) controller based on decentralized architecture is being used for DC microgrid stability. However, droop control requires a tradeoff between voltage regulation and droop gain. Further, global stability through PI controller cannot be verified and controller parameters cannot be optimized with different operating conditions. To address limitations, an equivalent sliding mode (SM) controller is proposed for a DC microgrid system in this paper. Detailed simulations are carried out, and results are presented, which show the effectiveness of an equivalent SM controller.

scholarly journals Capacitor Siting and Sizing using Cost Minimization & Monty Carlo Simulations for RDS

2019 ◽  
Vol 8 (3) ◽  
pp. 2482-2489
Keyword(s):  
Reactive Power ◽  
Cost Minimization ◽  
Minimum Cost ◽  
Distribution Networks ◽  
Voltage Regulation ◽  
System Capacity ◽  
Design Stage ◽  
Loss Reduction ◽  
Minimization Algorithm ◽  
Optimal Value

Capacitors are widely used in distribution networks for energy loss reduction, reactive power compensation, voltage regulation, and for system capacity release. However, it’s important that the system is designed initially, and capacitors are applied in correct magnitude and at right node to achieve best results. The most important task for distribution engineer is to efficiently simulate the system at design stage and later apply optimum capacitance injection. The work presented in this paper proposes a cost minimization algorithm using a unique mathematical model along with Monty carlo simulation to choose optimal value of capacitors, both fixed and switching based on total minimum cost algorithm.

scholarly journals Optimal Capacitor Bank Allocation in Electricity Distribution Networks Using Metaheuristic Algorithms

Energies ◽  
2019 ◽  
Vol 12 (22) ◽  
pp. 4239 ◽  
Author(s):  
Ivanov ◽  
Neagu ◽  
Grigoras ◽  
Gavrilas
Keyword(s):  
Optimization Algorithm ◽  
Smart Grids ◽  
Reactive Power ◽  
Distribution Networks ◽  
Operating Conditions ◽  
Metaheuristic Algorithms ◽  
System Level ◽  
Electricity Distribution ◽  
Capacitor Banks ◽  
Whale Optimization

Energy losses and bus voltage levels are key parameters in the operation of electricity distribution networks (EDN), in traditional operating conditions or in modern microgrids with renewable and distributed generation sources. Smart grids are set to bring hardware and software tools to improve the operation of electrical networks, using state-of the art demand management at home or system level and advanced network reconfiguration tools. However, for economic reasons, many network operators will still have to resort to low-cost management solutions, such as bus reactive power compensation using optimally placed capacitor banks. This paper approaches the problem of power and energy loss minimization by optimal allocation of capacitor banks (CB) in medium voltage (MV) EDN buses. A comparison is made between five metaheuristic algorithms used for this purpose: the well-established Genetic Algorithm (GA); Particle Swarm Optimization (PSO); and three newer metaheuristics, the Bat Optimization Algorithm (BOA), the Whale Optimization Algorithm (WOA) and the Sperm-Whale Algorithm (SWA). The algorithms are tested on the IEEE 33-bus system and on a real 215-bus EDN from Romania. The newest SWA algorithm gives the best results, for both test systems.

Sign in / Sign up

Export Citation Format

Share Document