scholarly journals Tilted Beam Fabry–Perot Antenna with Enhanced Gain and Broadband Low Backscattering

Electronics ◽  
2021 ◽  
Vol 10 (3) ◽  
pp. 267
Author(s):  
Hassan Umair ◽  
Tarik Bin Abdul Latef ◽  
Yoshihide Yamada ◽  
Wan Nor Liza Binti Wan Mahadi ◽  
Mohamadariff Othman ◽  
...  
Keyword(s):  
Ground Plane ◽  
Frequency Selective Surface ◽  
Bottom Surface ◽  
Phase Gradient ◽  
Periodic Surface ◽  
Radar Signature ◽  
Incident Plane ◽  
Fabry Perot ◽  
Reflecting Surface ◽  
Peak Gain

Communication with low radar signature platforms requires antennas with low backscatter, to uphold the low observability attribute of the platforms. In this work, we present the design for a Fabry–Perot (F-P) cavity antenna with low monostatic radar cross section (RCS) and enhanced gain. In addition, peak radiation is tilted inthe elevation plane. This is achieved by incorporating phase gradient metasurface (PGM) with absorptive frequency selective surface (FSS). The periodic surface of metallic square loops with lumped resistors forms the absorptive surface, placed on top of a partially reflecting surface (PRS) with an intervening air gap. The double-sided PRS consists of uniform metallic patches etched in a periodic fashion on its upper side. The bottom surface consists of variable-sized metallic patches, to realize phase gradient. The superstrate assembly is placed at about half free space wavelength above the patch antenna resonating at 6.6 GHz. The antenna’s ground plane and PRS together construct the F-P cavity. A peak gain of 11.5 dBi is achieved at 13° tilt of the elevation plane. Wideband RCS reduction is achieved, spanning 5.6–16 GHz, for x- and y-polarizations of normally incident plane wave. The average RCS reduction is 13 dB. Simulation results with experimental verifications are presented.

scholarly journals Design of a Substrate-Integrated Fabry-Pérot Cavity Antenna forK-Band Applications

2015 ◽  
Vol 2015 ◽  
pp. 1-12 ◽  
Author(s):  
Truong Khang Nguyen ◽  
Ikmo Park
Keyword(s):  
Coplanar Waveguide ◽  
Ground Plane ◽  
Cost Effective ◽  
Frequency Selective Surface ◽  
High Gain ◽  
Hole Array ◽  
Impedance Bandwidth ◽  
Low Profile ◽  
Fabry Perot ◽  
Feeding Structure

This paper presents the design of a planar, low-profile, high-gain, substrate-integrated Fabry-Pérot cavity antenna forK-band applications. The antenna consists of a frequency selective surface (FSS) and a planar feeding structure, which are both lithographically patterned on a high-permittivity substrate. The FSS is made of a circular hole array that acts as a partially reflecting mirror. The planar feeding structure is a wideband leaky-wave slit dipole fed by a coplanar waveguide whose ground plane acts as a perfect reflective mirror. The measured results show that the proposed antenna has an impedance bandwidth of more than 8% (VSWR ≤ 2), a maximum gain of 13.1 dBi, and a 3 dB gain bandwidth of approximately 1.3% at a resonance frequency of around 21.6 GHz. The proposed antenna features low-profile, easy integration into circuit boards, mechanical robustness, and excellent cost-effective mass production suitability.

A two‐dimensional beam tilted Fabry‐Perot antenna based on a phase gradient partially reflecting surface

2019 ◽  
Vol 62 (2) ◽  
pp. 887-892 ◽  
Author(s):  
Yongtao Jia ◽  
Ying Liu ◽  
Xuerui Yang ◽  
Xu Yang ◽  
Lei Sun
Keyword(s):  
Two Dimensional ◽  
Phase Gradient ◽  
Fabry Perot ◽  
Reflecting Surface

scholarly journals Radar Cross Section Reduction of Low Profile Fabry-Perot Resonator Antenna Using Checker Board Artificial Magnetic Conductor

2018 ◽  
Vol 7 (2) ◽  
pp. 76-82 ◽  
Author(s):  
V. A. Libi Mol ◽  
C. K. Aanandan
Keyword(s):  
Cross Section ◽  
Ground Plane ◽  
Radar Cross Section ◽  
Bottom Surface ◽  
Board Structure ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Low Profile ◽  
Fabry Perot ◽  
Checker Board

This paper presents a novel low profile, high gain Fabry-Perot resonator antenna with reduced radar cross section (RCS). An artificial magnetic conductor which provides zero degree reflection phase at resonant frequency is used as the ground plane of the antenna to obtain the low profile behavior. A checker board structure consisting of two artificial magnetic conductor (AMC) surfaces with antiphase reflection property is used as the superstrate to reduce the RCS. The bottom surface of superstrate is perforated to act as partially reflective surface to enhance the directivity of antenna. The antenna has a 3 dB gain bandwidth from 9.32 GHz to 9.77 GHz with a peak gain of 12.95 dBi at 9.6 GHz. The cavity antenna also has reduced reflectivity with a maximum reduction of 14.5 dB at 9.63 GHz.

scholarly journals Quarter Wavelength Fabry–Perot Cavity Antenna with Wideband Low Monostatic Radar Cross Section and Off-Broadside Peak Radiation

2021 ◽  
Vol 11 (3) ◽  
pp. 1053
Author(s):  
Hassan Umair ◽  
Tarik Bin Abdul Latef ◽  
Yoshihide Yamada ◽  
Tayyab Hassan ◽  
Wan Nor Liza Binti Wan Mahadi ◽  
...  
Keyword(s):  
Cross Section ◽  
Patch Antenna ◽  
Ground Plane ◽  
Radar Cross Section ◽  
Beam Deflection ◽  
Radiation Beam ◽  
Phase Gradient ◽  
Mesh Structure ◽  
Gain Enhancement ◽  
Fabry Perot

Since antennas are strong radar targets, their radar cross section (RCS) reduction and radiation enhancement is of utmost necessity, particularly for stealth platforms. This work proposes the design of a Fabry–Perot Cavity (FPC) antenna which has wideband low monostatic RCS. While in the transmission mode, not only is gain enhancement achieved, but radiation beam is also deflected in the elevation plane. Moreover, the design is low-profile, i.e., the cavity height is ~λ/4. A patch antenna designed at 6 GHz serves as the excitation source of the cavity constructed between the metallic ground plane and superstrate. The superstrate structure is formed with absorptive frequency selective surface (AFSS) in conjunction with dual-sided partially reflective surface (PRS). Resistor loaded metallic rings serve as the AFSS, while PRS is constructed from inductive gradated mesh structure on one side to realize phase gradient for beam deflection; the other side has fixed capacitive elements. Results show that wideband RCS reduction was achieved from 4–16 GHz, with average RCS reduction of about 8.5 dB over the reference patch antenna. Off-broadside peak radiation at −38° was achieved, with gain approaching ~9.4 dB. Simulation and measurement results are presented.

scholarly journals A 300-GHz low-cost high-gain fully metallic Fabry–Perot cavity antenna for 6G terahertz wireless communications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Basem Aqlan ◽  
Mohamed Himdi ◽  
Hamsakutty Vettikalladi ◽  
Laurent Le-Coq
Keyword(s):  
Communication Systems ◽  
Low Cost ◽  
Frequency Selective Surface ◽  
High Gain ◽  
Wireless Communication Systems ◽  
Beam Radiation ◽  
Compact Size ◽  
Fabry Perot ◽  
Operating Bandwidth ◽  
Polarization Level

AbstractA low-cost, compact, and high gain Fabry–Perot cavity (FPC) antenna which operates at 300 GHz is presented. The antenna is fabricated using laser-cutting brass technology. The proposed antenna consists of seven metallic layers; a ground layer, an integrated stepped horn element (three-layers), a coupling layer, a cavity layer, and an aperture-frequency selective surface (FSS) layer. The proposed aperture-FSS function acts as a partially reflective surface, contributing to a directive beam radiation. For verification, the proposed sub-terahertz (THz) FPC antenna prototype was developed, fabricated, and measured. The proposed antenna has a measured reflection coefficient below − 10 dB from 282 to 304 GHz with a bandwidth of 22 GHz. The maximum measured gain observed is 17.7 dBi at 289 GHz, and the gain is higher than 14.4 dBi from 285 to 310 GHz. The measured radiation pattern shows a highly directive pattern with a cross-polarization level below − 25 dB over the whole band in all cut planes, which confirms with the simulation results. The proposed antenna has a compact size, low fabrication cost, high gain, and wide operating bandwidth. The total height of the antenna is 1.24 $${\lambda }_{0}$$ λ 0 ($${\lambda }_{0}$$ λ 0 at the design frequency, 300 GHz) , with a size of 2.6 mm × 2.6 mm. The proposed sub-THz waveguide-fed FPC antenna is suitable for 6G wireless communication systems.

scholarly journals 4 × 4 MIMO Antenna System for Smart Eyewear in Wi-Fi 5G and Wi-Fi 6e Wireless Communication Applications

Electronics ◽  
2021 ◽  
Vol 10 (23) ◽  
pp. 2936
Author(s):  
Ming-An Chung ◽  
Cheng-Wei Hsiao ◽  
Chih-Wei Yang ◽  
Bing-Ruei Chuang
Keyword(s):  
Ground Plane ◽  
Multiple Input Multiple Output ◽  
Antenna System ◽  
Slot Antenna ◽  
Actual Measurement ◽  
Antenna Efficiency ◽  
Mimo Antenna ◽  
Measurement Results ◽  
Working Frequency ◽  
Peak Gain

This paper proposes a small-slot antenna system (50 mm × 9 mm × 2.7 mm) for 4 × 4 multiple-input multiple-output (MIMO) on smart glasses devices. The antenna is set on the plastic temple, and the inverted F antenna radiates through the slot in the ground plane of the sputtered copper layer outside the temple. Two symmetrical antennas and slots on the same temple and series capacitive elements enhance the isolation between the two antenna ports. When both temples are equipped with the proposed antennas, 4 × 4 MIMO transmission can be achieved. The antenna substrate is made of polycarbonate (PC), and its thickness is 2.7 mm εr=2.85, tanδ=0.0092. According to the actual measurement results, this antenna has two working frequency bands when the reflection coefficient is lower than −10dB, its working frequency bandwidth at 4.58–5.72 GHz and 6.38–7.0 GHz. The proposed antenna has a peak gain of 4.3 dBi and antenna efficiency of 85.69% at 5.14 GHz. In addition, it also can obtain a peak gain of 3.3 dBi and antenna efficiency of 82.78% at 6.8 GHz. The measurement results show that this antenna has good performance, allowing future smart eyewear devices to be applied to Wi-Fi 5G (5.18–5.85 GHz) and Wi-Fi 6e (5.925–7.125 GHz).

scholarly journals A High-Isolation Dual-Polarization Substrate-Integrated Fabry-Pérot Cavity Antenna

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Chang Chen ◽  
Bo-Liang Liu ◽  
Ling Ji ◽  
Wei-Dong Chen
Keyword(s):  
Near Field ◽  
Ground Plane ◽  
Cross Polarization ◽  
Dual Polarization ◽  
High Isolation ◽  
Fabry Perot ◽  
Feeding Structure ◽  
Operating Bandwidth ◽  
High Degree ◽  
Polarization Level

A dual-polarization substrate-integrated Fabry-Pérot cavity (SI-FPC) antenna is presented in this paper. The patch embedded in SI-FPC is excited with a near-field coupled feeding structure for V-polarization and with a slot-coupled feeding structure for H-polarization. The feeding structures are separated by a ground plane to improve the isolation between the ports. As a design example, an antenna operating at 10.0 GHz is fabricated and measured. A high degree of port isolation (<−40 dB) over the whole operating bandwidth (9.5–10.2 GHz) and good cross-polarization level (>25 dB) can be achieved.

Sign in / Sign up

Export Citation Format

Share Document