scholarly journals Modeling of PV Module and DC/DC Converter Assembly for the Analysis of Induced Transient Response Due to Nearby Lightning Strike

Electronics ◽  
2021 ◽  
Vol 10 (2) ◽  
pp. 120
Author(s):  
Alessandro Formisano ◽  
Jesus C. Hernández ◽  
Carlo Petrarca ◽  
Francisco Sanchez-Sutil
Keyword(s):  
Electromagnetic Transients ◽  
Lightning Strike ◽  
Lightning Strikes ◽  
Pv Systems ◽  
Whole Process ◽  
Pv Module ◽  
Improved Model ◽  
Lumped Equivalent Circuit ◽  
High Frequency Effects ◽  
Magnetic Field Computation

Photovoltaic (PV) systems are subject to nearby lightning strikes that can contribute to extremely high induced overvoltage transients. Recently, the authors introduced a 3D semi-analytical method to study the electromagnetic transients caused by these strikes in a PV module. In the present paper we develop an improved model of the PV module that: (a) takes into account high-frequency effects by modelling capacitive and inductive couplings; (b) considers the electrical insulation characteristics of the module; (c) includes the connection to a DC/DC converter. The whole process involves three major steps, i.e., the magnetic-field computation, the evaluation of both common-mode- and differential-mode-induced voltages across the PV module, and the use of the calculated voltages as input to a lumped equivalent circuit of the PV module connected to the DC/DC converter. In such a framework, the influence of the PV operating condition on the resulting electrical stresses is assessed; moreover, the relevance or insignificance of some parameters, such as the module insulation or the frame material, is demonstrated. Finally, results show that the induced overvoltage are highly dependent both on the grounding of the conducting parts and on the external conditions such as lightning current waveforms and lightning channel (LC) geometry.

scholarly journals Evaluation of a Direct Lightning Strike to the 24 kV Distribution Lines in Thailand

Energies ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 3193 ◽  
Author(s):  
Pornchai Sestasombut ◽  
Atthapol Ngaopitakkul
Keyword(s):  
Electromagnetic Transients ◽  
Lightning Strike ◽  
Significant Variable ◽  
Line System ◽  
Lightning Strikes ◽  
Underground Cables ◽  
Ground Resistance ◽  
Distribution Lines ◽  
Surge Arresters ◽  
Distribution Line

This paper evaluates the effect of a lightning strike directly on the 24 kV distribution lines in Thailand, where such strikes are one of the main causes of power outages. The voltage across the insulator, and the arrester energy absorbed due to the lightning, need to be analyzed for different grounding distances of the overhead ground wire, ground resistance, lightning impact positions, and lightning current waveforms. Analysis and simulations are conducted using the Alternative Transients Program/Electromagnetic Transients Program (ATP/EMTP) to find the energy absorbed by the arrester and the voltages across the insulator. The results indicate that when surge arresters are not installed, the voltage across the insulator at the end of the line is approximately 1.4 times that in the middle of the line. In addition, the ground resistance and grounding distance of the overhead ground wire affect the voltage across the insulator if the overhead ground wire is struck. When surge arresters are installed, a shorter grounding distance of the overhead ground wire and a lower ground resistance are not always desirable; this is because they reduce the back-flashover rate and the voltage across the insulator if lightning strikes the overhead ground wire. However, lightning strikes to the phase conductor result in high arrester energy and the possibility that the arrester will fail. Furthermore, the tail time of the lightning waveform is a significant variable when considering the energy absorbed by the arrester, whereas the front time is important for the voltage across the insulator. In case lightning strikes directly on the connected point between the overhead lines and the underground cables, the distribution line system is protected only by the lightning arrester at the connection point. The overvoltage at the connection point is lower than the basic impulse level at 24 kV of 125 kV, but the overvoltage at the end of the cable is still more than 125 kV in case the cable is longer than 400 m. When the distribution line system is protected by the lightning arrester at both the connection point and the end of the cable, it results in overvoltage throughout the cable is lower than the critical flashover of insulation. This method is the best way to reduce the failure rate of underground cables and equipment that are connected to the distribution line system.

scholarly journals Numerical Analysis of Transient Performance of Grounding Grid with Lightning Rod Installed on Multi-Grounded Frame

Energies ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3392
Author(s):  
Zhuoran Liu ◽  
Weidong Shi ◽  
Bo Zhang
Keyword(s):  
Time Domain ◽  
Potential Gradient ◽  
Field Testing ◽  
Electromagnetic Transients ◽  
Whole Body ◽  
Lightning Strike ◽  
Lightning Strikes ◽  
Factors Affecting ◽  
Grounding Grid ◽  
Ground Potential

In large substations, many lightning rods are installed on multi-grounded frames. The lightning rods, the frame, the grounding grid and the soil form a whole body, and the lightning current will be discharged from many grounding points. In this paper, based on the partial element equivalent circuit method, a numerical model, in the time domain, is developed to simulate the lightning-caused electromagnetic transients on the frame and the grounding grid. The model is verified by field testing and by comparison with commercial software. The model has several features: (1) it has a simple time domain form; (2) it is stable due to a staggered arrangement of space and time variables and an implicit difference scheme used, and (3) the dimension of the equations is relatively small because the unknown variables are divided into several groups, which are calculated one by one. With this method, the transient characteristics of the grounding grid with lightning rods on the frame are calculated, and the factors affecting the results are analyzed. It can be seen that although the frame causes the ground potential rise in an evenly distributed manner, compared with the situation in which the lightning strikes an independent lightning rod, the ground potential decrease rate near the main grounding point is almost the same because most of the current still enters the soil from the grounding electrode closest to the lightning strike. Therefore, even if there is a frame, the nearby facilities should take the same protective measures as in the case of an independent lightning rod. The ground conductors near the grounding points of the frame should be dense enough to reduce the potential gradient. The equipment should be kept at least 10 m away from the grounding point for lightning.

scholarly journals Analysis and Design of a Multi-Port DC-DC Converter for Interfacing PV Systems

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1943
Author(s):  
Bader N. Alajmi ◽  
Mostafa I. Marei ◽  
Ibrahim Abdelsalam ◽  
Mohamed F. AlHajri
Keyword(s):  
High Frequency ◽  
Computer Aided Design ◽  
Electromagnetic Transients ◽  
Pv System ◽  
Analysis And Design ◽  
Pv Systems ◽  
Point Tracking ◽  
Power Point Tracking ◽  
Power Point ◽  
Aided Design

A high-frequency multi-port (HFMP) direct current (DC) to DC converter is presented. The proposed HFMP is utilized to interface a photovoltaic (PV) system. The presented HFMP is compact and can perform maximum power point tracking. It consists of a high-frequency transformer with many identical input windings and one output winding. Each input winding is connected to a PV module through an H-bridge inverter, and the maximum PV power is tracked using the perturb and observe (P&O) technique. The output winding is connected to a DC bus through a rectifier. The detailed analysis and operation of the proposed HFMP DC-DC converter are presented. Extensive numerical simulations are conducted, using power system computer aided design (PSCAD)/electromagnetic transients including DC (EMTDC) software, to evaluate the operation and dynamic behavior of the proposed PV interfacing scheme. In addition, an experimental setup is built to verify the performance of the HFMP DC-DC converter.

scholarly journals A Simple Mismatch Mitigating Partial Power Processing Converter for Solar PV Modules

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2308
Author(s):  
Kamran Ali Khan Niazi ◽  
Yongheng Yang ◽  
Tamas Kerekes ◽  
Dezso Sera
Keyword(s):  
Experimental Tests ◽  
Energy Yield ◽  
Power Electronic ◽  
Solar Pv ◽  
Partial Shading ◽  
Loss Analysis ◽  
Pv Systems ◽  
Pv Module ◽  
Pv Modules ◽  
In Series

Partial shading affects the energy harvested from photovoltaic (PV) modules, leading to a mismatch in PV systems and causing energy losses. For this purpose, differential power processing (DPP) converters are the emerging power electronic-based topologies used to address the mismatch issues. Normally, PV modules are connected in series and DPP converters are used to extract the power from these PV modules by only processing the fraction of power called mismatched power. In this work, a switched-capacitor-inductor (SCL)-based DPP converter is presented, which mitigates the non-ideal conditions in solar PV systems. A proposed SCL-based DPP technique utilizes a simple control strategy to extract the maximum power from the partially shaded PV modules by only processing a fraction of the power. Furthermore, an operational principle and loss analysis for the proposed converter is presented. The proposed topology is examined and compared with the traditional bypass diode technique through simulations and experimental tests. The efficiency of the proposed DPP is validated by the experiment and simulation. The results demonstrate the performance in terms of higher energy yield without bypassing the low-producing PV module by using a simple control. The results indicate that achieved efficiency is higher than 98% under severe mismatch (higher than 50%).

scholarly journals Computation of Energy Absorption and Residual Voltage in a Fourth Rail LRT Station Arresters in EMTP-RV: A Comparative Study

2021 ◽  
Author(s):  
Farah Asyikin Abd Rahman ◽  
Mohd Zainal Abidin Ab Kadir ◽  
Ungku Anisa Ungku Amirulddin ◽  
Miszaina Osman
Keyword(s):  
Electromagnetic Transients ◽  
Lightning Strike ◽  
Voltage Gradient ◽  
Urban Transit ◽  
Residual Voltage ◽  
Voltage Ratio ◽  
Lightning Channel ◽  
Breakdown Region ◽  
Current Region ◽  
Performance Results

AbstractThis paper presents a study on the performance of a fourth rail direct current (DC) urban transit affected by an indirect lightning strike. The indirect lightning strike was replicated and represented by a lightning-induced overvoltage by means of the Rusck model, with the sum of two Heidler functions as its lightning channel base current input, on a perfect conducting ground. This study aims to determine whether an indirect lightning strike has any influence with regard to the performance of the LRT Kelana Jaya line, a fourth rail DC urban transit station arrester. The simulations were carried out using the Electromagnetic Transients Program–Restructured Version (EMTP–RV), which includes the comparison performance results between the 3EB4-010 arrester and PDTA09 arrester when induced by a 90 kA (9/200 µs). The results demonstrated that the PDTA09 arrester showed better coordination with the insulated rail bracket of the fourth rail. It allowed a lower residual voltage and a more dynamic response, eventually resulting in better voltage gradient in the pre-breakdown region and decreased residual voltage ratio in the high current region.

scholarly journals Comparative Performance Analysis of Grid-Connected PV Power Systems with Different PV Technologies in the Hot Summer and Cold Winter Zone

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Chong Li
Keyword(s):  
Thin Film ◽  
Power Systems ◽  
Ambient Temperature ◽  
Performance Ratio ◽  
Solar Irradiation ◽  
Energy Output ◽  
Cold Winter ◽  
Pv Systems ◽  
Monthly Average ◽  
Pv Module

The objective of this paper is to establish the performance of 8 kWp grid-connected photovoltaic (PV) power systems based on different PV module technologies in Nanjing, China. Nanjing has a hot summer and a cold winter which are considered based on monthly average solar irradiation and ambient temperature specifically for the deployment of grid-connected PV systems. The study focuses on performance assessment of grid-connected PV systems using typical PV modules made of monocrystalline silicon (m-Si), polycrystalline silicon (p-Si), edge-defined film-fed growth silicon (EFG-Si), cadmium telluride (CdTe) thin film, copper indium selenide (CIS) thin film, heterojunction with intrinsic thin layer (HIT), and hydrogenated amorphous silicon single-junction (a-Si:H single-PV) installed on location. The yearly average energy output, PV module and system efficiency, array yield, final yield, reference yield, performance ratio, monthly average array capture losses, and system losses of seven PV module technologies are all analyzed. The results show that grid-connected PV power system performance depends on geographical location, PV module types, and climate conditions such as solar radiation and ambient temperature. In addition, based on energy output and efficiency, the HIT PV power technology can be considered as the best option and CdTe and p-Si as the least suitable options for this area. The monthly average performance ratio of the CdTe technology was higher than those of other technologies over the monitoring period in Nanjing.

scholarly journals Effect of indirect lightning strike to 66kV transmission line in Java-Bali system

2018 ◽  
Vol 197 ◽  
pp. 11001
Author(s):  
Aristo Adi Kusuma ◽  
Putu Agus Aditya Pramana ◽  
Brian Bramantyo S.D.A. Harsono ◽  
Buyung Sofiarto Munir
Keyword(s):  
Transmission Line ◽  
Transmission Lines ◽  
Lightning Strike ◽  
Actual Condition ◽  
Peak Current ◽  
Lightning Strikes ◽  
Detection Systems ◽  
Current Magnitude ◽  
Lightning Detection ◽  
Insulator Flashover

Based on Java-Bali grid disturbance data, the 66kV transmission lines that is close to or intersect with 150kV or 500kV transmission line is often experienced earth fault due to insulator flashover. The insulator flashover can be caused by indirect lightning strike since lightning strikes tend to strike higher structure. Therefore, this paper will determine the effect of indirect lightning strike on 150kV or 500kV transmission line to 66kV transmission line by modeling and simulation using application of transient analysis. Variation of lightning peak current magnitude and gap between 66kV transmission line and transmission line with higher voltage is performed during simulation. The range of peak current magnitude follows the data from lightning detection systems, while the value of gap follows the data from actual condition. It is found that higher current peak and closer gap will cause higher transient overvoltage on insulator of 66kV transmission line thus insulator flashover may occur more frequent. Addition of earth wire on 66kV transmission line and gap between each transmission by organizing the sag of conductor can be performed to minimize the insulator flashover.

scholarly journals Earth-termination system for onshore wind Turbines.

2020 ◽  
Vol 11 (7-2020) ◽  
pp. 66-72
Author(s):  
Liubov A. Belova ◽  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Lightning Strike ◽  
Lightning Protection ◽  
Protection Measures ◽  
Lightning Strikes ◽  
Grounding System ◽  
Initial Stage ◽  
Wind Turbine Towers ◽  
Surge Protection

The earth-termination system for towers of ground-based wind turbines in addition to protective and functional grounding provides lightning protection grounding, which is especially important since the wind turbine is susceptible to lightning strikes. If insufficient protective measures are taken, the risk of damage to a wind turbine due to a lightning strike increases. Therefore, a well-thought-out built-in grounding system for wind turbine towers is needed, which would function as necessary and guarantee long-term mechanical strength and corrosion resistance. The configuration of grounding systems for wind turbines is discussed in IEC 61400-24, which deals with the topic of lightning protection for wind turbines, including detailed information on the choice of lightning protection measures and surge protection. It is advisable to create a lightning protection concept at the initial stage of planning a wind turbine in order to avoid later costly repairs and retrofitting.

scholarly journals Evaluation of Lightning Protection Efficacy on Nigerian Installations High Voltage Installations Using Screen and Cone of Protection Methods

2019 ◽  
Vol 4 (7) ◽  
pp. 1-10
Author(s):  
M. O. Oyeleye
Keyword(s):  
High Voltage ◽  
Computer Aided Design ◽  
Travelling Waves ◽  
Screening Method ◽  
Lightning Strike ◽  
Physical Measurement ◽  
Lightning Strikes ◽  
Spatial Design ◽  
Protective System ◽  
Design Values

This study evaluated lightning protective system efficacy on 11kV-132kV substation-power line installation in Ikorodu, Lagos State, Nigeria with reference to cloud to ground(C-G) lightning strike (LS) events. It focus on interception of lightning strikes and its protection with reference to direct lightning strike (DLS) and indirect lightning strike (IDLS). Data were collected from Ikorodu 132/33 kV Transmission Substation and its four major injection stations.  This work was carried out using physical measurement of raw data obtained from the high voltage substation. Installations were scaled down and modelled dimensionally using AutoCAD software in order to measure spatial parameters in order to measure the screening of the existing substations and connected lines, as well as the existing cone angles of protection. Probability of lightning efficiency of lightning protective level (LPL) are used for screening evaluation while spike and sky wire angle of protection are used for cone of protection evaluation. Physical measurement of six substations (33/11 kV and 132/33 kV substations) in the studied area were also carried out to evaluate the effectiveness of the installed lightning arresters with respect to the protected devices using applicable standard. The results under the prevailing lightning protective system, LPS, (screening method), revealed that the existing 33/11 kV and 132/33 kV substations are not adequately protected against lightning strike; 132/33 kV substation is more vulnerable to lightning strike than 33/11kV substation and that the incoming 132kV power lines to the substation are adequately protected. The evaluation of the installed distances of all lightning arresters are within standard range and would adequately protect substation transformers against travelling waves (Indirect Stroke) events. The installed lightning arresters (LAs) would adequately protect substation transformers against travelling waves (Indirect Stroke) events. The adequate protection should be reinforced with proposed design scheme in further study in order to mitigate the disastrous effects of lightning strike. Any proposed design of protective system for electric power installations in Nigeria should be simulated using computer aided design software for scaled validation of dimensional and spatial design values in order to mitigate reported failures and uncertainties in identifying causes of observed failures in the system.

scholarly journals An efficient Mppt approach of PV systems: incremental conduction pathway

2019 ◽  
Vol 15 (3) ◽  
pp. 1189
Author(s):  
Murari Lal Azad ◽  
Pradip Kumar Sadhu ◽  
P Arvind ◽  
Anagh Gupta ◽  
Tuhin Bandyopadhyay ◽  
...  
Keyword(s):  
Integrated System ◽  
Maximum Power ◽  
Operating Point ◽  
Pv System ◽  
Optimal Operating ◽  
Pv Systems ◽  
Simulink Model ◽  
Pv Module ◽  
Conduction Pathway ◽  
Power Point

<p class="Abstract">Distributed Generation source have wide application due to their phenomenal advantages. These sources include Photovoltaic (PV) cells producing DC voltage at their output that connects the network through a power electronic interface. PV characteristics, on the other hand, illustrate the fact that maximum power can be extracted at the optimal operating point depending upon the solar radiation and ambient temperature. In order to keep   the PV module at its optimal operating point, a DC-DC converter is often used between a PV module and inverter. Consequently, Maximum power point trackers (MPPT) grab the foremost position in the efficiency analysis of the global PV system. Among the several MPPT algorithms, Incremental Conduction technique isemphasised upon as it is extremely simple in implementation within electronic programmable circuits. This paper incorporates the MPPT model using a PV module that always works in its optimal operating point. Design and experimental results of a small prototype of MPPT is presented here based on the Simulink model to verify the advantages of proposed integrated system.</p>

Sign in / Sign up

Export Citation Format

Share Document