scholarly journals Degrees-Of-Freedom in Multi-Cloud Based Sectored Cellular Networks

Entropy ◽  
2020 ◽  
Vol 22 (6) ◽  
pp. 668
Author(s):  
Samet Gelincik ◽  
Ghaya Rekaya-Ben Othman
Keyword(s):  
Cellular Networks ◽  
Degrees Of Freedom ◽  
Signal To Noise Ratio ◽  
Base Stations ◽  
Processing Capacity ◽  
Coding Schemes ◽  
Minimum Number ◽  
Cut Set ◽  
Base Band ◽  
Multi Cloud

This paper investigates the achievable per-user degrees-of-freedom (DoF) in multi-cloud based sectored hexagonal cellular networks (M-CRAN) at uplink. The network consists of N base stations (BS) and K ≤ N base band unit pools (BBUP), which function as independent cloud centers. The communication between BSs and BBUPs occurs by means of finite-capacity fronthaul links of capacities C F = μ F · 1 2 log ( 1 + P ) with P denoting transmit power. In the system model, BBUPs have limited processing capacity C BBU = μ BBU · 1 2 log ( 1 + P ) . We propose two different achievability schemes based on dividing the network into non-interfering parallelogram and hexagonal clusters, respectively. The minimum number of users in a cluster is determined by the ratio of BBUPs to BSs, r = K / N . Both of the parallelogram and hexagonal schemes are based on practically implementable beamforming and adapt the way of forming clusters to the sectorization of the cells. Proposed coding schemes improve the sum-rate over naive approaches that ignore cell sectorization, both at finite signal-to-noise ratio (SNR) and in the high-SNR limit. We derive a lower bound on per-user DoF which is a function of μ BBU , μ F , and r. We show that cut-set bound are attained for several cases, the achievability gap between lower and cut-set bounds decreases with the inverse of BBUP-BS ratio 1 r for μ F ≤ 2 M irrespective of μ BBU , and that per-user DoF achieved through hexagonal clustering can not exceed the per-user DoF of parallelogram clustering for any value of μ BBU and r as long as μ F ≤ 2 M . Since the achievability gap decreases with inverse of the BBUP-BS ratio for small and moderate fronthaul capacities, the cut-set bound is almost achieved even for small cluster sizes for this range of fronthaul capacities. For higher fronthaul capacities, the achievability gap is not always tight but decreases with processing capacity. However, the cut-set bound, e.g., at 5 M 6 , can be achieved with a moderate clustering size.

scholarly journals Algorithm to Estimate Direction of Arrival with Interpolated Array Elements for Coprime Array Holes

2020 ◽  
Vol 2020 ◽  
pp. 1-7
Author(s):  
Guicai Yu
Keyword(s):  
Degrees Of Freedom ◽  
Signal To Noise Ratio ◽  
Direction Of Arrival ◽  
Array Element ◽  
Regular Pattern ◽  
Minimum Number ◽  
Virtual Array ◽  
Novel Method ◽  
Coprime Arrays ◽  
Coprime Array

A novel method for adding antennas in the coprime arrays is introduced in this study, in order to solve the problem of the reduced degree of freedom of the array in the hole-existing coprime arrays. The minimum number of antennas interpolated in the algorithm maximizes the available degrees of freedom of virtual arrays, and the number of interpolated antennas does not change the original aperture size of the coprime arrays. With the proposed algorithm, the estimate of the direction of arrival is more accurate for a given signal-to-noise ratio. The scheme first finds the regular pattern of hole positions in virtual array elements, and then, according to the regular pattern, the position of the hole of the partial virtual array element is interpolated with the array element antenna at the position of the corresponding coprime arrays. The holes of the virtual array element are filled, giving virtual uniform continuous array elements with maximum degrees of freedom. We use the ESPRIT, and the simulation results show that the proposed algorithm improves the accuracy and resolution of estimates of the direction of arrival.

scholarly journals Correlated Blocking in mmWave Cellular Networks: Macrodiversity, Outage, and Interference

Electronics ◽  
2019 ◽  
Vol 8 (10) ◽  
pp. 1187 ◽  
Author(s):  
Enass Hriba ◽  
Matthew C. Valenti
Keyword(s):  
Cellular Networks ◽  
Signal To Noise Ratio ◽  
Base Station ◽  
Base Stations ◽  
Selection Combining ◽  
Diversity Combining ◽  
Real World Data ◽  
Noise Ratio ◽  
The Impact ◽  
Do So

In this paper, we provide a comprehensive analysis of macrodiversity for millimeter wave (mmWave) cellular networks. The key issue with mmWave networks is that signals are prone to blocking by objects in the environment, which causes paths to go from line-of-sight (LOS) to non-LOS (NLOS). We identify macrodiversity as an important strategy for mitigating blocking, as with macrodiversity the user will attempt to connect with two or more base stations. Diversity is achieved because if the closest base station is blocked, then the next base station might still be unblocked. However, since it is possible for a single blockage to simultaneously block the paths to two base stations, the issue of correlated blocking must be taken into account by the analysis. Our analysis characterizes the macrodiverity gain in the presence of correlated random blocking and interference. To do so, we develop a framework to determine distributions for the LOS probability, Signal to Noise Ratio (SNR), and Signal to Interference and Noise Ratio (SINR) by taking into account correlated blocking. We validate our framework by comparing our analysis, which models blockages using a random point process, with an analysis that uses real-world data to account for blockage. We consider a cellular uplink with both diversity combining and selection combining schemes. We also study the impact of blockage size and blockage density along with the effect of co-channel interference arising from other cells. We show that the assumption of independent blocking can lead to an incorrect evaluation of macrodiversity gain, as the correlation tends to decrease macrodiversity gain.

scholarly journals Revisiting Degrees of Freedom of Full-Duplex Systems with Opportunistic Transmission: An Improved User Scaling Law

2018 ◽  
Author(s):  
Haksoo Kim ◽  
Juyeop Kim ◽  
Sang Won Choi ◽  
Won-Yong Shin
Keyword(s):  
Degrees Of Freedom ◽  
Signal To Noise Ratio ◽  
Scaling Law ◽  
Base Station ◽  
Full Duplex ◽  
Duplex System ◽  
Single Antenna ◽  
Partial Channel ◽  
Minimum Number ◽  
Opportunistic Transmission

It was recently studied how to achieve the optimal degrees of freedom (DoF) in a multi-antenna full-duplex system with partial channel state information (CSI). In this paper, we revisit the DoF of a multiple-antenna full-duplex system using opportunistic transmission under the partial CSI, in which a full-duplex base station having M transmit antennas and M receive antennas supports a set of half-duplex mobile stations (MSs) having a single antenna each. Assuming no self-interference, we present a new hybrid opportunistic scheduling method that achieves the optimal sum DoF under an improved user scaling law. It is shown that the optimal sum DoF of 2M is asymptotically achievable provided that the number of MSs scales faster than SNRM, where SNR denotes the signal-to-noise ratio. This result reveals that in our full-duplex system, better performance on the user scaling law can be obtained without extra CSI, compared to the prior work that showed the required user scaling condition (i.e., the minimum number of MSs for guaranteeing the optimal DoF) of SNR2M−1.

scholarly journals Spectral and Energy Efficiencies in mmWave Cellular Networks for Optimal Utilization

2018 ◽  
Vol 2018 ◽  
pp. 1-11 ◽  
Author(s):  
Abdulbaset M. Hamed ◽  
Raveendra K. Rao
Keyword(s):  
Energy Efficiency ◽  
Cellular Networks ◽  
Spectral Efficiency ◽  
Cellular Network ◽  
Channel Model ◽  
Signal To Noise Ratio ◽  
Base Stations ◽  
Spectrum Efficiency ◽  
Line Of Sight ◽  
Model Parameters

Millimeter wave (mmWave) spectrum has been proposed for use in commercial cellular networks to relieve the already severely congested microwave spectrum. Thus, the design of an efficient mmWave cellular network has gained considerable importance and has to take into account regulations imposed by government agencies with regard to global warming and sustainable development. In this paper, a dense mmWave hexagonal cellular network with each cell consisting of a number of smaller cells with their own Base Stations (BSs) is presented as a solution to meet the increasing demand for a variety of high data rate services and growing number of users of cellular networks. Since spectrum and power are critical resources in the design of such a network, a framework is presented that addresses efficient utilization of these resources in mmWave cellular networks in the 28 and 73 GHz bands. These bands are already an integral part of well-known standards such as IEEE 802.15.3c, IEEE 802.11ad, and IEEE 802.16.1. In the analysis, a well-known accurate mmWave channel model for Line of Sight (LOS) and Non-Line of Sight (NLOS) links is used. The cellular network is analyzed in terms of spectral efficiency, bit/s, energy efficiency, bit/J, area spectral efficiency, bit/s/m2, area energy efficiency, bit/J/m2, and network latency, s/bit. These efficiency metrics are illustrated, using Monte Carlo simulation, as a function of Signal-to-Noise Ratio (SNR), channel model parameters, user distance from BS, and BS transmission power. The efficiency metrics for optimum deployment of cellular networks in 28 and 73 GHz bands are identified. Results show that 73 GHz band achieves better spectrum efficiency and the 28 GHz band is superior in terms of energy efficiency. It is observed that while the latter band is expedient for indoor networks, the former band is appropriate for outdoor networks.

Information capacity and bandwidth limitations in the SEM

1989 ◽  
Vol 47 ◽  
pp. 84-85
Author(s):  
D. C. Joy ◽  
R. D. Bunn
Keyword(s):  
Signal To Noise Ratio ◽  
Critical Dimension ◽  
Information Capacity ◽  
Acquisition Time ◽  
Signal To Noise ◽  
Sem Image ◽  
Probe Size ◽  
Minimum Number ◽  
Noise Ratio ◽  
Signal Channel

The information available from an SEM image is limited both by the inherent signal to noise ratio that characterizes the image and as a result of the transformations that it may undergo as it is passed through the amplifying circuits of the instrument. In applications such as Critical Dimension Metrology it is necessary to be able to quantify these limitations in order to be able to assess the likely precision of any measurement made with the microscope.The information capacity of an SEM signal, defined as the minimum number of bits needed to encode the output signal, depends on the signal to noise ratio of the image - which in turn depends on the probe size and source brightness and acquisition time per pixel - and on the efficiency of the specimen in producing the signal that is being observed. A detailed analysis of the secondary electron case shows that the information capacity C (bits/pixel) of the SEM signal channel could be written as :

scholarly journals Machine Learning for the Dynamic Positioning of UAVs for Extended Connectivity

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4618
Author(s):  
Francisco Oliveira ◽  
Miguel Luís ◽  
Susana Sargento
Keyword(s):  
Machine Learning ◽  
Cellular Networks ◽  
Real Data ◽  
Emerging Technology ◽  
Machine Learning Algorithms ◽  
Base Stations ◽  
Aerial Vehicle ◽  
Positioning Algorithm ◽  
The Military ◽  
Better Than

Unmanned Aerial Vehicle (UAV) networks are an emerging technology, useful not only for the military, but also for public and civil purposes. Their versatility provides advantages in situations where an existing network cannot support all requirements of its users, either because of an exceptionally big number of users, or because of the failure of one or more ground base stations. Networks of UAVs can reinforce these cellular networks where needed, redirecting the traffic to available ground stations. Using machine learning algorithms to predict overloaded traffic areas, we propose a UAV positioning algorithm responsible for determining suitable positions for the UAVs, with the objective of a more balanced redistribution of traffic, to avoid saturated base stations and decrease the number of users without a connection. The tests performed with real data of user connections through base stations show that, in less restrictive network conditions, the algorithm to dynamically place the UAVs performs significantly better than in more restrictive conditions, reducing significantly the number of users without a connection. We also conclude that the accuracy of the prediction is a very important factor, not only in the reduction of users without a connection, but also on the number of UAVs deployed.

scholarly journals Adaptive offloading in mobile-edge computing for ultra-dense cellular networks based on genetic algorithm

2021 ◽  
Vol 10 (1) ◽  
Author(s):  
Zhuofan Liao ◽  
Jingsheng Peng ◽  
Bing Xiong ◽  
Jiawei Huang
Keyword(s):  
Genetic Algorithm ◽  
Energy Consumption ◽  
Cellular Networks ◽  
Physical Distance ◽  
Edge Computing ◽  
Base Stations ◽  
Mobile Edge Computing ◽  
Total Energy Consumption ◽  
Average Delay ◽  
Server Selection

AbstractWith the combination of Mobile Edge Computing (MEC) and the next generation cellular networks, computation requests from end devices can be offloaded promptly and accurately by edge servers equipped on Base Stations (BSs). However, due to the densified heterogeneous deployment of BSs, the end device may be covered by more than one BS, which brings new challenges for offloading decision, that is whether and where to offload computing tasks for low latency and energy cost. This paper formulates a multi-user-to-multi-servers (MUMS) edge computing problem in ultra-dense cellular networks. The MUMS problem is divided and conquered by two phases, which are server selection and offloading decision. For the server selection phases, mobile users are grouped to one BS considering both physical distance and workload. After the grouping, the original problem is divided into parallel multi-user-to-one-server offloading decision subproblems. To get fast and near-optimal solutions for these subproblems, a distributed offloading strategy based on a binary-coded genetic algorithm is designed to get an adaptive offloading decision. Convergence analysis of the genetic algorithm is given and extensive simulations show that the proposed strategy significantly reduces the average latency and energy consumption of mobile devices. Compared with the state-of-the-art offloading researches, our strategy reduces the average delay by 56% and total energy consumption by 14% in the ultra-dense cellular networks.

scholarly journals Deep Q-Learning for Two-Hop Communications of Drone Base Stations

Sensors ◽  
2021 ◽  
Vol 21 (6) ◽  
pp. 1960
Author(s):  
Azade Fotouhi ◽  
Ming Ding ◽  
Mahbub Hassan
Keyword(s):  
Degrees Of Freedom ◽  
Network Performance ◽  
Learning Model ◽  
Base Stations ◽  
Communication Model ◽  
Complex Environments ◽  
End User ◽  
Q Learning ◽  
Trajectory Simulation ◽  
Target Environment

In this paper, we address the application of the flying Drone Base Stations (DBS) in order to improve the network performance. Given the high degrees of freedom of a DBS, it can change its position and adapt its trajectory according to the users movements and the target environment. A two-hop communication model, between an end-user and a macrocell through a DBS, is studied in this work. We propose Q-learning and Deep Q-learning based solutions to optimize the drone’s trajectory. Simulation results show that, by employing our proposed models, the drone can autonomously fly and adapts its mobility according to the users’ movements. Additionally, the Deep Q-learning model outperforms the Q-learning model and can be applied in more complex environments.

Bounds on achievable degrees of freedom in blind cellular networks

2016 ◽  
Vol 10 (15) ◽  
pp. 2034-2042 ◽  
Author(s):  
Alireza Ghiamatyoun ◽  
Ali Olfat
Keyword(s):  
Cellular Networks ◽  
Degrees Of Freedom

scholarly journals Latency optimization for D2D-enabled parallel mobile edge computing in cellular networks

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Yan Cai ◽  
Liang Ran ◽  
Jun Zhang ◽  
Hongbo Zhu
Keyword(s):  
Cellular Networks ◽  
Optimal Solution ◽  
Vital Role ◽  
Base Stations ◽  
Low Latency ◽  
Mobile Edge Computing ◽  
System Delay ◽  
Simulation Results ◽  
And Task ◽  
Parallel Communication

AbstractEdge offloading, including offloading to edge base stations (BS) via cellular links and to idle mobile users (MUs) via device-to-device (D2D) links, has played a vital role in achieving ultra-low latency characteristics in 5G wireless networks. This paper studies an offloading method of parallel communication and computation to minimize the delay in multi-user systems. Three different scenarios are explored, i.e., full offloading, partial offloading, and D2D-enabled partial offloading. In the full offloading scenario, we find a serving order for the MUs. Then, we jointly optimize the serving order and task segment in the partial offloading scenario. For the D2D-enabled partial offloading scenario, we decompose the problem into two subproblems and then find the sub-optimal solution based on the results of the two subproblems. Finally, the simulation results demonstrate that the offloading method of parallel communication and computing can significantly reduce the system delay, and the D2D-enabled partial offloading can further reduce the latency.

Sign in / Sign up

Export Citation Format

Share Document