scholarly journals The Effect of Compressible Flow on Heat Transfer Performance of Heat Exchanger by Computational Fluid Dynamics (CFD) Simulation

Entropy ◽  
2019 ◽  
Vol 21 (9) ◽  
pp. 829 ◽  
Author(s):  
Yu ◽  
Qin ◽  
Chai ◽  
Huang ◽  
Liu
Keyword(s):  
Heat Transfer ◽  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Compressible Flow ◽  
Prediction Models ◽  
Cfd Simulation ◽  
Surface Friction ◽  
Maximum Deviation ◽  
Loss Maximum ◽  
Computational Fluid Dynamics Cfd

As a part of vehicle thermal management, water-cooled intercoolers play an important role in engine efficiency. The incompressible simulation model was usually applied to estimate the performance of water-cooled intercoolers. In this paper, the computational fluid dynamics (CFD) compressible model is taken to analyze more accurate prediction models. The rate of section change, heat exchange, and the surface friction coefficient are used as the comparison basis of the compressible flow model and incompressible model on the pressurized air side of the water-cooled intercooler. By comparing the simulation results of the air side, it was found that the compressible simulation is closer to the experimental value than the incompressible simulation. Compared with the experiment, the compressible model heat transfer maximum value of deviation is 6.5%, and the pressure loss maximum deviation is 7.5%. This provides guidance to optimize the design of heat exchangers, in order to save on costs and shorten development times.

scholarly journals Computational Fluid Dynamics (CFD) Simulation on Mixing in T-Shaped Micromixer

2020 ◽  
Vol 932 ◽  
pp. 012006
Author(s):  
S N A Ahmad Termizi ◽  
C Y Khor ◽  
M A M Nawi ◽  
Nurlela Ahmad ◽  
Muhammad Ikman Ishak ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Cfd Simulation ◽  
Computational Fluid Dynamics Cfd

A Study on the Performance of Stratified Air Conditioning Design in Assembly Halls – A Case Study at the Dazhi Cultural Center in Taiwan

2013 ◽  
Vol 368-370 ◽  
pp. 599-602 ◽  
Author(s):  
Ian Hung ◽  
Hsien Te Lin ◽  
Yu Chung Wang
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Indoor Air ◽  
Air Conditioning ◽  
Cfd Simulation ◽  
Indoor Temperature ◽  
Cultural Center ◽  
Computational Fluid Dynamics Cfd

This study focuses on the performance of air conditioning design at the Dazhi Cultural Center and uses a computational fluid dynamics (CFD) simulation to discuss the differences in wind velocity and ambient indoor temperature between all-zone air conditioning design and stratified air conditioning design. The results have strong implications for air conditioning design and can improve the indoor air quality of assembly halls.

scholarly journals The Protect Air Film of an Exterior Window

2021 ◽  
Author(s):  
Sanaz Dianat
Keyword(s):  
Heat Transfer ◽  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Speed ◽  
Glass Temperature ◽  
Experimental Procedure ◽  
Wind Speeds ◽  
Computational Fluid Dynamics Cfd ◽  
Air Film ◽  
The Impact

The research paper investigates the impact of a window’s exterior air film on the assembly temperature. The exterior air film constitutes a vital portion of a window’s insulating values. The air film increases the temperature of the window exterior pane to a temperature above ambient temperature. The air film also rises the interior glass temperature and reduces the heat transfer from the interior surface. According to computational fluid dynamics (CFD), the air film is removed in windy conditions, decreasing the window temperature on the outside as well as on the inside. The idea behind the project is to carry out an experimental procedure on three different windows to validate the CFD results, which indicates the effect of various wind speeds. Keyword: Exterior air film, computational fluid dynamics, window assembly, wind speed

scholarly journals The Protect Air Film of an Exterior Window

2021 ◽  
Author(s):  
Sanaz Dianat
Keyword(s):  
Heat Transfer ◽  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Wind Speed ◽  
Glass Temperature ◽  
Experimental Procedure ◽  
Wind Speeds ◽  
Computational Fluid Dynamics Cfd ◽  
Air Film ◽  
The Impact

The research paper investigates the impact of a window’s exterior air film on the assembly temperature. The exterior air film constitutes a vital portion of a window’s insulating values. The air film increases the temperature of the window exterior pane to a temperature above ambient temperature. The air film also rises the interior glass temperature and reduces the heat transfer from the interior surface. According to computational fluid dynamics (CFD), the air film is removed in windy conditions, decreasing the window temperature on the outside as well as on the inside. The idea behind the project is to carry out an experimental procedure on three different windows to validate the CFD results, which indicates the effect of various wind speeds. Keyword: Exterior air film, computational fluid dynamics, window assembly, wind speed

Design Approach for the Development of the Flow Field of Bipolar Plates for a PEMFC Stack Prototype

2014 ◽  
Vol 11 (6) ◽  
Author(s):  
Paolo Sala ◽  
Paola Gallo Stampino ◽  
Giovanni Dotelli
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Fuel Cell ◽  
Cfd Simulation ◽  
Bipolar Plates ◽  
Flow Rates ◽  
Gas Leakage ◽  
Auxiliary Power ◽  
Computational Fluid Dynamics Cfd ◽  
Enhance Mass

This work is part of a project whose final aim is the realization of an auxiliary power fuel cell generator. It was necessary to design and develop bipolar plates that would be suitable for this application. Bipolar plates have a relevant influence on the final performances of the entire device. A gas leakage or a bad management of the water produced during the reaction could be determinant during operations and would cause the failure of the stack. The development of the bipolar plates was performed in different steps. First, the necessity to make an esteem of the dynamics that happen inside the feeding channels led to perform analytical calculations. The values found were cross-checked performing a computational fluid dynamics (CFD) simulation; finally, it was defined the best pattern for the feeding channels, so that to enhance mass transport and achieve the best velocity profile. The bipolar plates designed were machined and assembled in a laboratory scale two cells prototype stack. Influences of the temperature and of the humidity were evaluated performing experiments at 60 deg and 70 deg and between 60% and 100% of humidity of the reactant gasses. The best operating point achieved in one of these conditions was improved by modifying the flow rates of the reactant, in order to obtain the highest output power, and it evaluated the reliability of the plates in experiments performed for longer times, at fixed voltages.

Sign in / Sign up

Export Citation Format

Share Document