scholarly journals Study on Droplet Size and Velocity Distributions of a Pressure Swirl Atomizer Based on the Maximum Entropy Formalism

Entropy ◽  
2015 ◽  
Vol 17 (2) ◽  
pp. 580-593 ◽  
Author(s):  
Kai Yan ◽  
Zhi Ning ◽  
Ming Lü ◽  
Chunhua Sun
Keyword(s):  
Maximum Entropy ◽  
Droplet Size ◽  
Maximum Entropy Formalism ◽  
Swirl Atomizer ◽  
Pressure Swirl ◽  
Pressure Swirl Atomizer

Prediction of drop size distribution in a spray from a pressure swirl atomizer using maximum entropy formalism

2003 ◽  
Vol 217 (7) ◽  
pp. 831-838 ◽  
Author(s):  
D Mondal ◽  
A Datta ◽  
A Sarkar
Keyword(s):  
Maximum Entropy ◽  
Size Distribution ◽  
Drop Size ◽  
Drop Size Distribution ◽  
Pressure Differential ◽  
Liquid Mass ◽  
Atomization Efficiency ◽  
Swirl Atomizer ◽  
Pressure Swirl ◽  
Pressure Swirl Atomizer

Drop size distribution is an important characterizing parameter of a spray. In the present work a theoretical model has been described, based on the maximum entropy formalism principle, for the determination of the drop size distribution in a spray issued from a pressure swirl atomizer. The atomization efficiency is also derived from the model, assuming the velocities of all the drop sizes to be uniform. The results show that the drop size distribution, described from the present model, resembles the Rosin-Rammler type distribution very well, with a dispersion parameter of 3.47. The atomization efficiency is found to decrease with the increase in liquid mass flowrates, when the pressure differential across the atomizer remains the same. On the other hand, an increase in the orifice diameter increases the atomization efficiency, when the liquid mass flow rate and pressure differential are the same. The ratio of the surface energy to the kinetic energy at the atomizer exit is seen to influence the atomization efficiency.

Droplet size and velocity distributions in a spray from a pressure swirl atomizer: Application of maximum entropy formalism

2004 ◽  
Vol 218 (7) ◽  
pp. 737-749 ◽  
Author(s):  
D Mondal ◽  
A Datta ◽  
A Sarkar
Keyword(s):  
Maximum Entropy ◽  
Droplet Size ◽  
Ambient Pressure ◽  
Cone Angle ◽  
Distribution Functions ◽  
Operating Conditions ◽  
Spray Parameters ◽  
Spray Cone ◽  
Maximum Entropy Formalism ◽  
Pressure Swirl

The present work has attempted a unification of the empirical spray parameters for the pressure swirl atomizers with the maximum entropy formalism principle for the predictions of both size and velocity distributions in a spray. The information entropy is maximized under suitable constraint conditions to evaluate a number-based droplet size and velocity joint distribution parameter. The constraint equations have been defined to include the spray parameters, such as the Sauter mean diameter, spray cone angle and liquid film thickness, to consider their influence on the distribution. A comparison of the predicted results using the present theory is made with the experimental data available in the literature and good agreement is achieved. The effects of the atomizer input conditions, such as injection pressure, ambient pressure and the properties of atomizing liquids, on the size and velocity distributions are studied using the present model. A calculation of the efficiency of the atomization process using the size and velocity distribution functions is also made to study the effect of operating conditions on the performance of atomization.

INTERNAL AND NEAR-NOZZLE FLOW OF A PRESSURE-SWIRL ATOMIZER UNDER VARIED FUEL TEMPERATURE

2007 ◽  
Vol 17 (6) ◽  
pp. 529-550 ◽  
Author(s):  
Seoksu Moon ◽  
Choongsik Bae ◽  
Essam F. Abo-Serie ◽  
Jaejoon Choi
Keyword(s):  
Nozzle Flow ◽  
Fuel Temperature ◽  
Swirl Atomizer ◽  
Pressure Swirl ◽  
Pressure Swirl Atomizer

Study of pressure swirl atomizer with tangential input at design point and outside of design point

2020 ◽  
Vol 32 (12) ◽  
pp. 127113
Author(s):  
Kiumars Khani Aminjan ◽  
Balaram Kundu ◽  
D. D. Ganji
Keyword(s):  
Design Point ◽  
Swirl Atomizer ◽  
Pressure Swirl ◽  
Pressure Swirl Atomizer

Studies on air core size in a simplex pressure-swirl atomizer

2017 ◽  
Vol 42 (29) ◽  
pp. 18649-18657 ◽  
Author(s):  
Zhilin Liu ◽  
Yong Huang ◽  
Lei Sun
Keyword(s):  
Core Size ◽  
Air Core ◽  
Swirl Atomizer ◽  
Pressure Swirl ◽  
Pressure Swirl Atomizer

A Numerical Approach for the Simulation of Internal Nozzle Flow in a Pressure Swirl Atomizer Using Different Turbulent Models and Towards an Effective Inlet Weber Number

2013 ◽  
Author(s):  
Ahmadreza Abbasi Baharanchi ◽  
Seckin Gokaltun ◽  
Shahla Eshraghi
Keyword(s):  
Weber Number ◽  
Computational Cost ◽  
Internal Flow ◽  
Numerical Approach ◽  
Reynolds Stress Model ◽  
Multiphase Model ◽  
Vof Model ◽  
Swirl Atomizer ◽  
Pressure Swirl ◽  
Pressure Swirl Atomizer

VOF Multiphase model is used to simulate the flow inside a pressure-swirl-atomizer. The capability of the Reynolds Stress Model and variants of the K-ε and K-ω models in modeling of turbulence has been investigated in the commercial computational fluid dynamics (CFD) software FLUENT 6.3. The Implicit scheme available in the volume-of-fluid (VOF) model is used to calculate the interface representation between phases. The atomization characteristics have been investigated as well as the influence of the inlet swirl strength of the internal flow. The numerical results have been successfully validated against experimental data available for the computed parameters. The performance of the RNG K-ε model was found to be satisfactory in reducing the computational cost and introducing an effective Weber number for the flow simulated in this study.

Sign in / Sign up

Export Citation Format

Share Document