scholarly journals Sensing Characteristics of Side-Polished Fiber Based on the Alterations in Helical Structure of Thermo-Sensitive Cholesteric Liquid Crystals

Crystals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 465
Author(s):  
Yuqi Han ◽  
Yan Jiang ◽  
Wei Guo
Keyword(s):  
Liquid Crystals ◽  
Structural Changes ◽  
Helical Structure ◽  
Polished Surface ◽  
Loss Peak ◽  
Cholesteric Liquid Crystals ◽  
Fiber Sensors ◽  
Temperature Changes ◽  
Solid Foundation ◽  
Transmitted Spectrum

Cholesteric liquid crystals (CLCs) are sensitive to environmental temperature changes, and have been employed as a specific intermediary for biosensors. Considering the temperature-dependent structural changes of CLCs, this study aimed to determine the sensing properties of side-polished fibers (SPFs) after coating with CLCs. The experimental results demonstrated that, with regard to the transmitted spectrum, the loss peak of CLC-coated SPFs exhibited a positive linear relationship with temperature changes over a range of 20 to 50 °C. The linear correlation coefficient achieved 97.8% when the temperature increased by 10 °C, and the loss peak drifted by 12.72 nm. The reflectance spectrum of CLCs coated on the polished surface were obtained using optical fiber sensors. The feasibility of measuring the helical structure of CLCs was further verified using SPF transmission spectroscopy. The findings indicated that the transmitted spectrum of SPFs could be adopted to characterize the helical structure of CLCs, which lays a solid foundation for further study on SPF-based biosensors.

scholarly journals Thermo-Chromic Response of Polymer Stabilized Cholesteric Liquid Crystal for Thermal Imaging

2019 ◽  
Vol 1 (2) ◽  
Author(s):  
Rishi Kumar
Keyword(s):  
Optical Properties ◽  
Liquid Crystal ◽  
Liquid Crystals ◽  
Thermal Imaging ◽  
Cholesteric Liquid Crystal ◽  
Helical Structure ◽  
Cholesteric Liquid Crystals ◽  
Polymer Stabilized

Cholesteric liquid crystal (Ch-LC) exhibits many remarkable optical properties due to formation of a macroscopic helical structure. A low amount of monomer (5wt.%) is dispersed into cholesteric liquid crystal and get polymerized under UV radiations to form polymer stabilized cholesteric texture (PSCT). The thermo-chromic response made this device suitable for the developing applications in thermal imaging. Temperature based measurements of PSCT exploits the key property of some polymer stabilized cholesteric liquid crystals (PSCLC) to reflect definite colors at specific temperatures. The selective color of PSCT texture shifts with raise in temperature from 30oC to 85oC, which can be utilized in thermal imaging applications.

Photochemical tuning of the helical structure of cholesteric liquid crystals by photoisomerization of chiral azobenzenes, and their structural effects

2004 ◽  
Vol 31 (9) ◽  
pp. 1285-1291 ◽  
Author(s):  
Teppei Yoshioka ◽  
Md Zahangir Alam ◽  
Tomonari Ogata ◽  
Takamasa Nonaka ◽  
Seiji Kurihara
Keyword(s):  
Liquid Crystals ◽  
Helical Structure ◽  
Structural Effects ◽  
Cholesteric Liquid Crystals

scholarly journals Synthesis and Characterization of Novel Bio-Chiral Dopants Obtained from Bio-Betulin Produced by a Fermentation Process

Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 785
Author(s):  
Veridiana G. Guimarães ◽  
Anastasiia Svanidze ◽  
Tianyi Guo ◽  
Pawan Nepal ◽  
Robert J. Twieg ◽  
...  
Keyword(s):  
Liquid Crystals ◽  
Natural Product ◽  
Fermentation Process ◽  
Synthesis And Characterization ◽  
Cholesteric Liquid Crystals ◽  
And Performance ◽  
Chiral Dopants

Cholesteric liquid crystals are frequently produced by the addition of chiral dopants to achiral nematic hosts. We report here the synthesis and performance of chiral dopants obtained from bio-betulin produced by a fermentation process. An important aspect of this work is to point out that the fermentation process used to obtain the starting materials is much easier and cheaper when carried out in large volumes than isolating it from the natural product. The performance of the dopants obtained from bio-betulin is indistinguishable from those obtained from commercially available synthetic betulin.

Changes of Selected Structural and Mechanical Properties of the Strzelin Granites As Induced By Thermal Loads / Wpływ Obciążeń Termicznych Na Zmiany Niektórych Strukturalnych I Mechanicznych Właściwości Granitów Strzelińskich

2012 ◽  
Vol 57 (4) ◽  
pp. 951-974 ◽  
Author(s):  
Andrzej Nowakowski ◽  
Mariusz Młynarczuk
Keyword(s):  
Mechanical Properties ◽  
Nuclear Waste ◽  
Structural Changes ◽  
Structural Parameters ◽  
Total Porosity ◽  
Fracture Network ◽  
Qualitative Description ◽  
Temperature Changes ◽  
Heating And Cooling ◽  
Waste Repositories

Abstract Temperature is one of the basic factors influencing physical and structural properties of rocks. A quantitative and qualitative description of this influence becomes essential in underground construction and, in particular, in the construction of various underground storage facilities, including nuclear waste repositories. The present paper discusses the effects of temperature changes on selected mechanical and structural parameters of the Strzelin granites. Its authors focused on analyzing the changes of granite properties that accompany rapid temperature changes, for temperatures lower than 573ºC, which is the value at which the β - α phase transition in quartz occurs. Some of the criteria for selecting the temperature range were the results of measurements carried out at nuclear waste repositories. It was demonstrated that, as a result of the adopted procedure of heating and cooling of samples, the examined rock starts to reveal measurable structural changes, which, in turn, induces vital changes of its selected mechanical properties. In particular, it was shown that one of the quantities describing the structure of the rock - namely, the fracture network - grew significantly. As a consequence, vital changes could be observed in the following physical quantities characterizing the rock: primary wave velocity (vp), permeability coefficient (k), total porosity (n) and fracture porosity (η), limit of compressive strength (Rσ1) and the accompanying deformation (Rε1), Young’s modulus (E), and Poisson’s ratio (ν).

Sign in / Sign up

Export Citation Format

Share Document