scholarly journals On Modeling Concrete Compressive Strength Data Using Laplace Birnbaum-Saunders Distribution Assuming Contaminated Information

Crystals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 830
Author(s):  
Farouq Mohammad A. Alam ◽  
Mazen Nassar
Keyword(s):  
Compressive Strength ◽  
Optimization Problems ◽  
Probability Model ◽  
Simulated Data ◽  
Real Data ◽  
Reliability Function ◽  
Stress Factors ◽  
Model Parameters ◽  
Data Set ◽  
Suggested Approach

Compressive strength is a well-known measurement to evaluate the endurance of a given concrete mixture to stress factors, such as compressive loads. A suggested approach to assess compressive strength of concrete is to assume that it follows a probability model from which its reliability is calculated. In reliability analysis, a probability distribution’s reliability function is used to calculate the probability of a specimen surviving to a certain threshold without damage. To approximate the reliability of a subject of interest, one must estimate the corresponding parameters of the probability model. Researchers typically formulate an optimization problem, which is often nonlinear, based on the maximum likelihood theory to obtain estimates for the targeted parameters and then estimate the reliability. Nevertheless, there are additional nonlinear optimization problems in practice from which different estimators for the model parameters are obtained once they are solved numerically. Under normal circumstances, these estimators may perform similarly. However, some might become more robust under irregular situations, such as in the case of data contamination. In this paper, nine frequentist estimators are derived for the parameters of the Laplace Birnbaum-Saunders distribution and then applied to a simulated data set and a real data set. Afterwards, they are compared numerically via Monte Carlo comparative simulation study. The resulting estimates for the reliability based on these estimators are also assessed in the latter study.

scholarly journals Discretization of the method of generating an expanded family of distributions based upon truncated distributions

2021 ◽  
Vol 25 (Spec. issue 1) ◽  
pp. 19-30
Author(s):  
Muhammad Farooq ◽  
Muhammad Mohsin ◽  
Muhammad Naeem ◽  
Muhammad Farman ◽  
Ali Akgul ◽  
...  
Keyword(s):  
Applied Mathematics ◽  
Survival Function ◽  
Real Data ◽  
Reliability Function ◽  
Continuous Functions ◽  
Discrete Distributions ◽  
Discrete Version ◽  
Model Parameters ◽  
Data Set ◽  
Family Of Distributions

Discretization translates the continuous functions into discrete version making them more adaptable for numerical computation and application in applied mathematics and computer sciences. In this article, discrete analogues of a generalization method of generating a new family of distributions is provided. Several new discrete distributions are derived using the proposed methodology. A discrete Weibull-Geometric distribution is considered and various of its significant characteristics including moment, survival function, reliability function, quantile function, and order statistics are discussed. The method of maximum likelihood and the method of moments are used to estimate the model parameters. The performance of the proposed model is probed through a real data set. A comparison of our model with some existing models is also given to demonstrate its efficiency.

Hidden Markov Models for the Stimulus-Response Relationships of Multistate Neural Systems

2011 ◽  
Vol 23 (5) ◽  
pp. 1071-1132 ◽  
Author(s):  
Sean Escola ◽  
Alfredo Fontanini ◽  
Don Katz ◽  
Liam Paninski
Keyword(s):  
Markov Models ◽  
Optimization Problems ◽  
Hidden Markov ◽  
Expectation Maximization Algorithm ◽  
Simulated Data ◽  
Published Data ◽  
Model Parameters ◽  
Data Set ◽  
Stimulus Response ◽  
Spike Train Data

Given recent experimental results suggesting that neural circuits may evolve through multiple firing states, we develop a framework for estimating state-dependent neural response properties from spike train data. We modify the traditional hidden Markov model (HMM) framework to incorporate stimulus-driven, non-Poisson point-process observations. For maximal flexibility, we allow external, time-varying stimuli and the neurons’ own spike histories to drive both the spiking behavior in each state and the transitioning behavior between states. We employ an appropriately modified expectation-maximization algorithm to estimate the model parameters. The expectation step is solved by the standard forward-backward algorithm for HMMs. The maximization step reduces to a set of separable concave optimization problems if the model is restricted slightly. We first test our algorithm on simulated data and are able to fully recover the parameters used to generate the data and accurately recapitulate the sequence of hidden states. We then apply our algorithm to a recently published data set in which the observed neuronal ensembles displayed multistate behavior and show that inclusion of spike history information significantly improves the fit of the model. Additionally, we show that a simple reformulation of the state space of the underlying Markov chain allows us to implement a hybrid half-multistate, half-histogram model that may be more appropriate for capturing the complexity of certain data sets than either a simple HMM or a simple peristimulus time histogram model alone.

Modified New Flexible Weibull Distribution

2017 ◽  
Vol 2 (6) ◽  
pp. 7-13
Author(s):  
Zubair Ahmad ◽  
Zawar Hussain
Keyword(s):  
Maximum Likelihood ◽  
Weibull Distribution ◽  
Mathematical Description ◽  
Real Data ◽  
Reliability Function ◽  
Model Parameters ◽  
Data Set ◽  
Mathematical Properties ◽  
Proposed Model ◽  
Parameter Modification

The present paper is devoted to introduce a four-parameter modification of new flexible Weibull distribution. The proposed model will be called modified new flexible Weibull distribution, able to model lifetime phenomena with increasing or bathtub-shaped failure rates. Some of its mathematical properties will be studied. The approach of maximum likelihood will be used for estimating the model parameters. A brief mathematical description for the reliability function will also be discussed. The usefulness of the proposed distribution will be illustrated by an application to a real data set.

EXPONENTIATED HALF-LOGISTIC LOMAX DISTRIBUTION WITH PROPERTIES AND APPLICATION

2019 ◽  
Vol XVI (2) ◽  
pp. 1-11
Author(s):  
Farrukh Jamal ◽  
Hesham Mohammed Reyad ◽  
Soha Othman Ahmed ◽  
Muhammad Akbar Ali Shah ◽  
Emrah Altun
Keyword(s):  
Real Data ◽  
Continuous Model ◽  
Model Parameters ◽  
Data Set ◽  
Lomax Distribution ◽  
Mathematical Properties ◽  
Proposed Model ◽  
Probability Weighted Moment ◽  
Record Statistics ◽  
Maximum Likelihood Criterion

A new three-parameter continuous model called the exponentiated half-logistic Lomax distribution is introduced in this paper. Basic mathematical properties for the proposed model were investigated which include raw and incomplete moments, skewness, kurtosis, generating functions, Rényi entropy, Lorenz, Bonferroni and Zenga curves, probability weighted moment, stress strength model, order statistics, and record statistics. The model parameters were estimated by using the maximum likelihood criterion and the behaviours of these estimates were examined by conducting a simulation study. The applicability of the new model is illustrated by applying it on a real data set.

scholarly journals On the Estimation of Reliability of Weighted Weibull Distribution: A Comparative Study

2016 ◽  
Vol 5 (4) ◽  
pp. 1
Author(s):  
Bander Al-Zahrani
Keyword(s):  
Maximum Likelihood ◽  
Weibull Distribution ◽  
Real Data ◽  
Reliability Function ◽  
Nonparametric Methods ◽  
Empirical Method ◽  
Density Estimator ◽  
Bayes Estimators ◽  
Unknown Parameters ◽  
Data Set

The paper gives a description of estimation for the reliability function of weighted Weibull distribution. The maximum likelihood estimators for the unknown parameters are obtained. Nonparametric methods such as empirical method, kernel density estimator and a modified shrinkage estimator are provided. The Markov chain Monte Carlo method is used to compute the Bayes estimators assuming gamma and Jeffrey priors. The performance of the maximum likelihood, nonparametric methods and Bayesian estimators is assessed through a real data set.

A new parameter set for anisotropic multiparameter full-waveform inversion and application to a North Sea data set

Geophysics ◽  
2016 ◽  
Vol 81 (4) ◽  
pp. U25-U38 ◽  
Author(s):  
Nuno V. da Silva ◽  
Andrew Ratcliffe ◽  
Vetle Vinje ◽  
Graham Conroy
Keyword(s):  
North Sea ◽  
Waveform Inversion ◽  
Real Data ◽  
Model Parameters ◽  
Full Waveform Inversion ◽  
Radiation Patterns ◽  
Data Set ◽  
Full Waveform ◽  
Seismic Image ◽  
Central North Sea

Parameterization lies at the center of anisotropic full-waveform inversion (FWI) with multiparameter updates. This is because FWI aims to update the long and short wavelengths of the perturbations. Thus, it is important that the parameterization accommodates this. Recently, there has been an intensive effort to determine the optimal parameterization, centering the fundamental discussion mainly on the analysis of radiation patterns for each one of these parameterizations, and aiming to determine which is best suited for multiparameter inversion. We have developed a new parameterization in the scope of FWI, based on the concept of kinematically equivalent media, as originally proposed in other areas of seismic data analysis. Our analysis is also based on radiation patterns, as well as the relation between the perturbation of this set of parameters and perturbation in traveltime. The radiation pattern reveals that this parameterization combines some of the characteristics of parameterizations with one velocity and two Thomsen’s parameters and parameterizations using two velocities and one Thomsen’s parameter. The study of perturbation of traveltime with perturbation of model parameters shows that the new parameterization is less ambiguous when relating these quantities in comparison with other more commonly used parameterizations. We have concluded that our new parameterization is well-suited for inverting diving waves, which are of paramount importance to carry out practical FWI successfully. We have demonstrated that the new parameterization produces good inversion results with synthetic and real data examples. In the latter case of the real data example from the Central North Sea, the inverted models show good agreement with the geologic structures, leading to an improvement of the seismic image and flatness of the common image gathers.

A GAMMA MOVING AVERAGE PROCESS FOR MODELLING DEPENDENCE ACROSS DEVELOPMENT YEARS IN RUN-OFF TRIANGLES

2020 ◽  
pp. 1-22
Author(s):  
Luis E. Nieto-Barajas ◽  
Rodrigo S. Targino
Keyword(s):  
Latent Variables ◽  
Moving Average ◽  
Real Data ◽  
Model Parameters ◽  
Average Process ◽  
Moving Average Process ◽  
Data Set ◽  
Run Off ◽  
Average Form ◽  
Reserve Estimates

ABSTRACT We propose a stochastic model for claims reserving that captures dependence along development years within a single triangle. This dependence is based on a gamma process with a moving average form of order $p \ge 0$ which is achieved through the use of poisson latent variables. We carry out Bayesian inference on model parameters and borrow strength across several triangles, coming from different lines of businesses or companies, through the use of hierarchical priors. We carry out a simulation study as well as a real data analysis. Results show that reserve estimates, for the real data set studied, are more accurate with our gamma dependence model as compared to the benchmark over-dispersed poisson that assumes independence.

scholarly journals Mixture of Inverse Weibull and Lognormal Distributions: Properties, Estimation, and Illustration

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
K. S. Sultan ◽  
A. S. Al-Moisheer
Keyword(s):  
Information Matrix ◽  
Real Data ◽  
Likelihood Method ◽  
Model Parameters ◽  
Component Mixture ◽  
Data Set ◽  
Hazard Functions ◽  
Lognormal Distributions ◽  
Proposed Model ◽  
Estimation Of Model Parameters

We discuss the two-component mixture of the inverse Weibull and lognormal distributions (MIWLND) as a lifetime model. First, we discuss the properties of the proposed model including the reliability and hazard functions. Next, we discuss the estimation of model parameters by using the maximum likelihood method (MLEs). We also derive expressions for the elements of the Fisher information matrix. Next, we demonstrate the usefulness of the proposed model by fitting it to a real data set. Finally, we draw some concluding remarks.

scholarly journals New Lindley Half Cauchy Distribution: Theory and Applications

2020 ◽  
Vol 9 (4) ◽  
pp. 1-7
Keyword(s):  
Maximum Likelihood ◽  
Real Data ◽  
Cauchy Distribution ◽  
Least Square ◽  
Cumulative Distribution ◽  
Likelihood Method ◽  
Estimation Methods ◽  
Model Parameters ◽  
Data Set ◽  
Von Mises

In this paper, we have defined a new two-parameter new Lindley half Cauchy (NLHC) distribution using Lindley-G family of distribution which accommodates increasing, decreasing and a variety of monotone failure rates. The statistical properties of the proposed distribution such as probability density function, cumulative distribution function, quantile, the measure of skewness and kurtosis are presented. We have briefly described the three well-known estimation methods namely maximum likelihood estimators (MLE), least-square (LSE) and Cramer-Von-Mises (CVM) methods. All the computations are performed in R software. By using the maximum likelihood method, we have constructed the asymptotic confidence interval for the model parameters. We verify empirically the potentiality of the new distribution in modeling a real data set.

scholarly journals Robustness of Projective IRT to Misspecification of the Underlying Multidimensional Model

2020 ◽  
Vol 44 (5) ◽  
pp. 362-375
Author(s):  
Tyler Strachan ◽  
Edward Ip ◽  
Yanyan Fu ◽  
Terry Ackerman ◽  
Shyh-Huei Chen ◽  
...  
Keyword(s):  
Item Response Theory ◽  
Item Response ◽  
Real Data ◽  
Model Parameters ◽  
Simulation Studies ◽  
Response Theory ◽  
Computational Stability ◽  
Data Set ◽  
Response Data ◽  
Higher Dimensional

As a method to derive a “purified” measure along a dimension of interest from response data that are potentially multidimensional in nature, the projective item response theory (PIRT) approach requires first fitting a multidimensional item response theory (MIRT) model to the data before projecting onto a dimension of interest. This study aims to explore how accurate the PIRT results are when the estimated MIRT model is misspecified. Specifically, we focus on using a (potentially misspecified) two-dimensional (2D)-MIRT for projection because of its advantages, including interpretability, identifiability, and computational stability, over higher dimensional models. Two large simulation studies (I and II) were conducted. Both studies examined whether the fitting of a 2D-MIRT is sufficient to recover the PIRT parameters when multiple nuisance dimensions exist in the test items, which were generated, respectively, under compensatory MIRT and bifactor models. Various factors were manipulated, including sample size, test length, latent factor correlation, and number of nuisance dimensions. The results from simulation studies I and II showed that the PIRT was overall robust to a misspecified 2D-MIRT. Smaller third and fourth simulation studies were done to evaluate recovery of the PIRT model parameters when the correctly specified higher dimensional MIRT or bifactor model was fitted with the response data. In addition, a real data set was used to illustrate the robustness of PIRT.

Sign in / Sign up

Export Citation Format

Share Document