scholarly journals Comparative Study of High-Performance Concrete Characteristics and Loading Test of Pretensioned Experimental Beams

Crystals ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 427
Author(s):  
Pavlina Mateckova ◽  
Vlastimil Bilek ◽  
Oldrich Sucharda
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
Raw Materials ◽  
Load Capacity ◽  
Materials Testing ◽  
Loading Test ◽  
Conventional Concrete ◽  
Concrete Mechanical Properties ◽  
Normal Strength

High-performance concrete (HPC) is subjected to wide attention in current research. Many research tasks are focused on laboratory testing of concrete mechanical properties with specific raw materials, where a mixture is prepared in a relatively small amount in ideal conditions. The wider utilization of HPC is connected, among other things, with its utilization in the construction industry. The paper presents two variants of HPC which were developed by modification of ordinary concrete used by a precast company for pretensioned bridge beams. The presented variants were produced in industrial conditions using common raw materials. Testing and comparison of basic mechanical properties are complemented with specialized tests of the resistance to chloride penetration. Tentative expenses for normal strength concrete (NSC) and HPC are compared. The research program was accomplished with a loading test of model experimental pretensioned beams with a length of 7 m made of ordinarily used concrete and one variant of HPC. The aim of the loading test was to determine the load–deformation diagrams and verify the design code load capacity calculation method. Overall, the article summarizes the possible benefits of using HPC compared to conventional concrete.

scholarly journals State of the Art: Mechanical Properties of Ultra-High Performance Concrete

2017 ◽  
Vol 3 (3) ◽  
pp. 190-198 ◽  
Author(s):  
Mohamadtaqi Baqersad ◽  
Ehsan Amir Sayyafi ◽  
Hamid Mortazavi Bak
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
State Of The Art ◽  
High Strength ◽  
Structural Members ◽  
Ultra High Performance Concrete ◽  
Conventional Concrete ◽  
The Past ◽  
Very High

During the past decades, there has been an extensive attention in using Ultra-High Performance Concrete (UHPC) in the buildings and infrastructures construction. Due to that, defining comprehensive mechanical properties of UHPC required to design structural members is worthwhile. The main difference of UHPC with the conventional concrete is the very high strength of UHPC, resulting designing elements with less weight and smaller sizes.  However, there have been no globally accepted UHPC properties to be implemented in the designing process. Therefore, in the current study, the UHPC mechanical properties such as compressive and tensile strength, modulus of elasticity and development length for designing purposes are provided based on the reviewed literature. According to that, the best-recommended properties of UHPC that can be used in designing of UHPC members are summarized. Finally, different topics for future works and researches on UHPC’s mechanical properties are suggested.

Temperature Effect on the Mechanical Properties of Very High Performance Concrete

2018 ◽  
Vol 34 ◽  
pp. 29-39
Author(s):  
Mebarek Belaoura ◽  
Dalila Chiheb ◽  
Mohamed Nadjib Oudjit ◽  
Abderrahim Bali
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
Exothermic Reaction ◽  
Physical And Mechanical Properties ◽  
Mass Effect ◽  
Mechanical Tests ◽  
Conventional Concrete ◽  
Very High

This study aims at a better understanding of the behaviour of very high performance concretes (VHPC) subjected to high temperatures. The temperature increase within the concrete originating from the hydratation exothermic reaction of cement is emphasized by the mass effect of the structures and can lead to thermal variations of around 50°C between the heart and the structures walls. These thermal considerations are not without consequence on durability and the physical and mechanical properties of very high performance concrete, such as the compressive strength. This work is an experimental research that shows the effects of temperature on the mechanical properties of very high performance concrete (VHPC) and compares them with those of conventional concrete and HPC. Test specimens in usual concrete, HPC and VHPC are made, preserved till maturity of the concrete, and then subjected to a heating-cooling cycle from room temperature to 500°C at heating rate 0.1°C/min. Mechanical tests on the hot concrete and cooling (air and water) were realized. The results show that the mechanical characteristics of VHPC (density, compressive strength, tensile strength and elastic modulus) decrease with increasing temperature, but their strength remains higher than that of conventional concrete.

scholarly journals Experimental comparative study of reactive powder concrete: mechanical properties and the effective factors

2018 ◽  
Vol 162 ◽  
pp. 04004 ◽  
Author(s):  
Eyad Kadhem ◽  
Ammar Ali ◽  
Sameh Tobeia
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Modulus Of Elasticity ◽  
High Performance ◽  
High Performance Concrete ◽  
Splitting Tensile Strength ◽  
Steel Fibers ◽  
Reactive Powder Concrete ◽  
Concrete Mechanical Properties ◽  
Reactive Powder

Reactive Powder Concrete (RPC) is a type of ultra-high performance concrete, this dense composite material generally characterized by high cement content, high durability, low porosity, low water/cement ratio and in most cases contains steel fibers as new types of concrete appears, further investigation for their mechanical properties are needed. This work aims to give a better understanding of RPC behavior by deriving formulas to calculate the modulus of elasticity and the splitting tensile strength in relation with compressive strength and steel fibers content. This study is based on data obtained from the experimental investigation done in this work and from others pervious works. The parametric study is based mainly on the silica fume content which is used in four different ratios (12 %, 15 %, 20 % and 25 %), the use of micro steel fibers 15 mm in length, 0.2 mm in diameter and aspect ratio of 75 added in ratios of (0 %, 1 %, 1.5 % and 2 %), and water/cement in ratios of (16 %, 18 %, 20 % and 22 %), respectively. The proposed equations show a better behavior in comparison to some available equations that were used in the estimation of modulus of elasticity and splitting tensile strength of reactive powder concrete, the coefficient of variation for the proposed equations (COV) decrease to 10.677% and 10.455% respectively.

Innovative Approach to Repair Corroded Steel Piles using Ultra-High Performance Concrete

2020 ◽  
Vol 2674 (12) ◽  
pp. 1-14
Author(s):  
Binod Shrestha ◽  
Ahmed Gheni ◽  
Mohanad M. Abdulazeez ◽  
Mohamed A. ElGawady
Keyword(s):  
High Performance ◽  
High Performance Concrete ◽  
Load Capacity ◽  
Ultra High Performance Concrete ◽  
Conventional Concrete ◽  
Alkaline Salt ◽  
Axial Load Capacity ◽  
Steel Piles ◽  
Existing Bridges ◽  
Precast Elements

Steel H-piles are a common structural system in existing bridges. Many steel H-piles have been corroded as a result of severe weather and acid/alkaline salt exposures, causing a reduction in the axial load capacity. This paper experimentally investigates the use of ultra-high performance concrete (UHPC) encasement as a novel repair method for corroded steel H-pile. UHPC displays better tensile strength, early compressive strength, workability, and durability compared with conventional concrete. The proposed repair is used to bridge the corroded section in H-pile using either a cast-in-place or precast UHPC elements. A series of push-out tests was conducted on eight full-scale piles to assess the axial force that can be transferred through shear studs and bond between the UHPC and steel piles. The test parameters include the type of casting of the UHPC, that is, cast-in-place versus precast elements, thickness and shape of the UHPC elements, an inclusion of carbon fiber reinforced polymer (CFRP) grid, number and grade of bolts, an inclusion of washer, and applying torque on the bolts. The experimental work demonstrated that the UHPC precast repair can be easily implemented. Moreover, using 57 mm (2.25 in.) thick UHPC plates reinforced by two layers of the CFRP grid was capable of transferring up to 81% of the squash load of the H-pile.

scholarly journals Experimental Investigation and Prediction of Compressive Strength of Ultra-High Performance Concrete Containing Supplementary Cementitious Materials

2017 ◽  
Vol 2017 ◽  
pp. 1-8 ◽  
Author(s):  
Jisong Zhang ◽  
Yinghua Zhao ◽  
Haijiang Li
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Ann Model ◽  
Ultra High Performance Concrete ◽  
Superior Mechanical Properties ◽  
Normal Strength

Ultra-high performance concrete (UHPC) has superior mechanical properties and durability to normal strength concrete. However, the high amount of cement, high environmental impact, and initial cost are regarded as disadvantages, restricting its wider application. Incorporation of supplementary cementitious materials (SCMs) in UHPC is an effective way to reduce the amount of cement needed while contributing to the sustainability and cost. This paper investigates the mechanical properties and microstructure of UHPC containing fly ash (FA) and silica fume (SF) with the aim of contributing to this issue. The results indicate that, on the basis of 30% FA replacement, the incorporation of 10% and 20% SF showed equivalent or higher mechanical properties compared to the reference samples. The microstructure and pore volume of the UHPCs were also examined. Furthermore, to minimise the experimental workload of future studies, a prediction model is developed to predict the compressive strength of the UHPC using artificial neural networks (ANNs). The results indicate that the developed ANN model has high accuracy and can be used for the prediction of the compressive strength of UHPC with these SCMs.

Mechanical properties and durability of high - performance concrete for bridge decks

PCI Journal ◽  
2008 ◽  
Vol 53 (4) ◽  
pp. 108-130
Author(s):  
Mohsen A. Issa ◽  
Atef A. Khalil ◽  
Shahidul Islam ◽  
Paul D. Krauss
Keyword(s):  
Mechanical Properties ◽  
High Performance ◽  
High Performance Concrete ◽  
Bridge Decks
Sign in / Sign up

Export Citation Format

Share Document