scholarly journals Effect of Bi Content on the Microstructure and Mechanical Performance of Sn-1Ag-0.5Cu Solder Alloy

Crystals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 314
Author(s):  
Heba Y. Zahran ◽  
Ashraf S. Mahmoud ◽  
Alaa F. Abd El-Rehim
Keyword(s):  
Solder Alloy ◽  
Mechanical Performance ◽  
Testing Temperature ◽  
Mean Value ◽  
X Ray Diffraction ◽  
Preliminary Assessment ◽  
X Ray ◽  
Creep Measurements ◽  
The Mean ◽  
The Impact

The purpose of this work is to explore the impact of 0.5, 1.5, 2.5 and 3.5 wt.% Bi additions on the microstructure and mechanical performance of Sn-1Ag-0.5Cu solder alloy. Scanning electron microscope (SEM) and X-ray diffraction (XRD) were utilized to examine the microstructure of the present solders. Creep measurements have been used for the preliminary assessment of mechanical properties. The steady-state creep rate, έst, diminished as the Bi’s concentration increased and reached 2.5 wt.%, with this trend altering above this point. Furthermore, increasing the aging or testing temperature caused the έst values to increment for all the investigated solders. έst variations with different Bi content and aging temperature were observed by examining the Sn-Ag-Cu solders’ structural evolutions. The mean value of the activation energy of all investigated solder alloys was found to be ∼52 kJ/mol. This value is appropriate to that quoted for the dislocation climb through the core diffusion as the dominant operating mechanism. The XRD findings supported the microstructure and lattice parameters variations with both aging temperatures and bismuth concentrations.

Crystalline microstructure of sepiolite influenced by grinding

2005 ◽  
Vol 38 (6) ◽  
pp. 888-899 ◽  
Author(s):  
Marek Andrzej Kojdecki ◽  
Joaquín Bastida ◽  
Pablo Pardo ◽  
Pedro Amorós
Keyword(s):  
Specific Surface ◽  
Mean Value ◽  
Crystalline Lattice ◽  
Mean Deviation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Crystallite Shape ◽  
The Mean ◽  
Crystalline Microstructure ◽  
Grinding Time

The crystalline microstructure of ground sepiolite has been investigated. A reference sample of sepiolite and products of its comminution by dry grinding were studied through X-ray diffraction pattern analysis, specific surface measurements by nitrogen adsorption and complementary analysis of field emission scanning electron microscope images. A statistical model of polycrystals was applied to describe and determine the crystalline microstructure of the studied specimens. The model parameters characterizing the microstructure were prevalent crystallite shape, volume-weighted crystallite size distribution and second-order crystalline lattice strain distribution, and they were determined for each sample by modelling a selected part of the X-ray diffraction pattern and fitting the simulated pattern to a measured one. A strict correlation of microstructure parameters with grinding time and with specific surface magnitudes was observed. A parallelepiped with edge-length ratios almost independent of grinding time (for longer times) was found to be the predominant crystallite shape. The crystallite size distributions were found to be close to logarithmic normal ones, with the mean values decreasing with increasing grinding time and the standard-deviation-to-mean-value ratios approximately constant. The second-order crystalline lattice strain distributions were found to be close to some simple function with the mean value equal to zero, the mean deviation increasing with increasing grinding time and the standard-to-mean-deviation ratios approximately constant. It was demonstrated that the specific surface can be calculated on the basis of the microstructure characteristics. Some details of the relation between crystallites and crystalline grains were explained by comparing the results of analysesviaX-ray diffraction and scanning electron microscopy.

Isomorphous replacement in electron diffraction of wet crystals of rat hemoglobin

1983 ◽  
Vol 41 ◽  
pp. 446-447
Author(s):  
William F. Tivol ◽  
Murray Vernon King ◽  
D. F. Parsons
Keyword(s):  
Electron Diffraction ◽  
Heavy Atom ◽  
Isomorphous Substitution ◽  
X Ray Diffraction ◽  
Salt Solutions ◽  
X Ray ◽  
Isomorphous Replacement ◽  
Structure Factors ◽  
Diffraction Structure ◽  
The Mean

Feasibility of isomorphous substitution in electron diffraction is supported by a calculation of the mean alteration of the electron-diffraction structure factors for hemoglobin crystals caused by substituting two mercury atoms per molecule, following Green, Ingram & Perutz, but with allowance for the proportionality of f to Z3/4 for electron diffraction. This yields a mean net change in F of 12.5%, as contrasted with 22.8% for x-ray diffraction.Use of the hydration chamber in electron diffraction opens prospects for examining many proteins that yield only very thin crystals not suitable for x-ray diffraction. Examination in the wet state avoids treatments that could cause translocation of the heavy-atom labels or distortion of the crystal. Combined with low-fluence techniques, it enables study of the protein in a state as close to native as possible.We have undertaken a study of crystals of rat hemoglobin by electron diffraction in the wet state. Rat hemoglobin offers a certain advantage for hydration-chamber work over other hemoglobins in that it can be crystallized from distilled water instead of salt solutions.

Long-period modulated superstructures in Pd-12.5 at.%Ce and Pd-15 at.%Ce alloys

1990 ◽  
Vol 48 (4) ◽  
pp. 164-165
Author(s):  
Noriyuki Kuwano ◽  
Masaru Itakura ◽  
Kensuke Oki
Keyword(s):  
Electron Microscopy ◽  
Mean Value ◽  
Heavy Elements ◽  
Arc Furnace ◽  
X Ray ◽  
Long Period ◽  
Ultra High Purity ◽  
Heat Treated ◽  
Atomic Scattering ◽  
The Mean

Pd-Ce alloys exhibit various anomalies in physical properties due to mixed valences of Ce, and the anomalies are thought to be strongly related with the crystal structures. Since Pd and Ce are both heavy elements, relative magnitudes of (fcc-fpd) are so small compared with <f> that superlattice reflections, even if any, sometimes cannot be detected in conventional x-ray powder patterns, where fee and fpd are atomic scattering factors of Ce and Pd, and <f> the mean value in the crystal. However, superlattices in Pd-Ce alloys can be analyzed by electron microscopy, thanks to the high detectability of electron diffraction. In this work, we investigated modulated superstructures in alloys with 12.5 and 15.0 at.%Ce.Ingots of Pd-Ce alloys were prepared in an arc furnace under atmosphere of ultra high purity argon. The disc specimens cut out from the ingots were heat-treated in vacuum and electrothinned to electron transparency by a jet method.

scholarly journals The impact of point defects in n-type GaN layers on thermal decomposition of InGaN/GaN QWs

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Mikolaj Grabowski ◽  
Ewa Grzanka ◽  
Szymon Grzanka ◽  
Artur Lachowski ◽  
Julita Smalc-Koziorowska ◽  
...  
Keyword(s):  
Quantum Wells ◽  
High Temperatures ◽  
Point Defects ◽  
X Ray Diffraction ◽  
Helium Ions ◽  
X Ray ◽  
Sapphire Substrates ◽  
Transmission Electron ◽  
The Impact ◽  
Ingan Quantum Wells

AbstractThe aim of this paper is to give an experimental evidence that point defects (most probably gallium vacancies) induce decomposition of InGaN quantum wells (QWs) at high temperatures. In the experiment performed, we implanted GaN:Si/sapphire substrates with helium ions in order to introduce a high density of point defects. Then, we grew InGaN QWs on such substrates at temperature of 730 °C, what caused elimination of most (but not all) of the implantation-induced point defects expanding the crystal lattice. The InGaN QWs were almost identical to those grown on unimplanted GaN substrates. In the next step of the experiment, we annealed samples grown on unimplanted and implanted GaN at temperatures of 900 °C, 920 °C and 940 °C for half an hour. The samples were examined using Photoluminescence, X-ray Diffraction and Transmission Electron Microscopy. We found out that the decomposition of InGaN QWs started at lower temperatures for the samples grown on the implanted GaN substrates what provides a strong experimental support that point defects play important role in InGaN decomposition at high temperatures.

scholarly journals Preparation of high-entropy carbides by different sintering techniques

2021 ◽  
Vol 56 (19) ◽  
pp. 11237-11247 ◽  
Author(s):  
Johannes Pötschke ◽  
Manisha Dahal ◽  
Mathias Herrmann ◽  
Anne Vornberger ◽  
Björn Matthey ◽  
...  
Keyword(s):  
Grain Size ◽  
Single Phase ◽  
X Ray Diffraction ◽  
Vacuum Sintering ◽  
X Ray ◽  
High Entropy ◽  
Mean Grain Size ◽  
The Mean ◽  
Gas Pressure Sintering ◽  
Hardness Values

AbstractDense (Hf, Ta, Nb, Ti, V)C- and (Ta, Nb, Ti, V, W)C-based high-entropy carbides (HEC) were produced by three different sintering techniques: gas pressure sintering/sinter–HIP at 1900 °C and 100 bar Ar, vacuum sintering at 2250 °C and 0.001 bar as well as SPS/FAST at 2000 °C and 60 MPa pressure. The relative density varied from 97.9 to 100%, with SPS producing 100% dense samples with both compositions. Grain size measurements showed that the substitution of Hf with W leads to an increase in the mean grain size of 5–10 times the size of the (Hf, Ta, Nb, Ti, V,)C samples. Vacuum-sintered samples showed uniform grain size distribution regardless of composition. EDS mapping revealed the formation of a solid solution with no intermetallic phases or element clustering. X-ray diffraction analysis showed the structure of mostly single-phase cubic high-entropy carbides. Hardness measurements revealed that (Hf, Ta, Nb, Ti, V)C samples possess higher hardness values than (Ta, Nb, Ti, V, W)C samples.

scholarly journals Functional Bionanocomposite Fibers of Chitosan Filled with Cellulose Nanofibers Obtained by Gel Spinning

Polymers ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1563
Author(s):  
Sofia Marquez-Bravo ◽  
Ingo Doench ◽  
Pamela Molina ◽  
Flor Estefany Bentley ◽  
Arnaud Kamdem Tamo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Mechanical Performance ◽  
Cellulose Nanofibers ◽  
Microstructural Characterization ◽  
Fiber Formation ◽  
Fiber Direction ◽  
Composite Fibers ◽  
X Ray Diffraction ◽  
Gel Spinning ◽  
X Ray

Extremely high mechanical performance spun bionanocomposite fibers of chitosan (CHI), and cellulose nanofibers (CNFs) were successfully achieved by gel spinning of CHI aqueous viscous formulations filled with CNFs. The microstructural characterization of the fibers by X-ray diffraction revealed the crystallization of the CHI polymer chains into anhydrous chitosan allomorph. The spinning process combining acidic–basic–neutralization–stretching–drying steps allowed obtaining CHI/CNF composite fibers of high crystallinity, with enhanced effect at incorporating the CNFs. Chitosan crystallization seems to be promoted by the presence of cellulose nanofibers, serving as nucleation sites for the growing of CHI crystals. Moreover, the preferential orientation of both CNFs and CHI crystals along the spun fiber direction was revealed in the two-dimensional X-ray diffraction patterns. By increasing the CNF amount up to the optimum concentration of 0.4 wt % in the viscous CHI/CNF collodion, Young’s modulus of the spun fibers significantly increased up to 8 GPa. Similarly, the stress at break and the yield stress drastically increased from 115 to 163 MPa, and from 67 to 119 MPa, respectively, by adding only 0.4 wt % of CNFs into a collodion solution containing 4 wt % of chitosan. The toughness of the CHI-based fibers thereby increased from 5 to 9 MJ.m−3. For higher CNFs contents like 0.5 wt %, the high mechanical performance of the CHI/CNF composite fibers was still observed, but with a slight worsening of the mechanical parameters, which may be related to a minor disruption of the CHI matrix hydrogel network constituting the collodion and gel fiber, as precursor state for the dry fiber formation. Finally, the rheological behavior observed for the different CHI/CNF viscous collodions and the obtained structural, thermal and mechanical properties results revealed an optimum matrix/filler compatibility and interface when adding 0.4 wt % of nanofibrillated cellulose (CNF) into 4 wt % CHI formulations, yielding functional bionanocomposite fibers of outstanding mechanical properties.

Dalnegroite, Tl5–xPb2x(As,Sb)2l–xS34, a new thallium sulphosalt from Lengenbach quarry, Binntal, Switzerland

2009 ◽  
Vol 73 (6) ◽  
pp. 1027-1032 ◽  
Author(s):  
F. Nestola ◽  
A. Guastoni ◽  
L. Bindi ◽  
L. Secco
Keyword(s):  
Polarized Light ◽  
New Mineral ◽  
X Ray Diffraction ◽  
X Ray ◽  
Elemental Concentrations ◽  
Reflected Light ◽  
Mohs Hardness ◽  
The Mean ◽  
The University ◽  
Probable Space

AbstractDalnegroite, ideally Tl4Pb2(As12Sb8)Σ20S34, is a new mineral from Lengenbach, Binntal, Switzerland. It occurs as anhedral to subhedral grains up to 200 μm across, closely associated with realgar, pyrite, Sb-rich seligmanite in a gangue of dolomite. Dalnegroite is opaque with a submetallic lustre and shows a brownish-red streak. It is brittle; the Vickers hardness (VHN25) is 87 kg mm-2(range: 69—101) (Mohs hardness ∼3—3½). In reflected light, dalnegroite is highly bireflectant and weakly pleochroic, from white to a slightly greenish-grey. In cross-polarized light, it is highly anisotropic with bluish to green rotation tints and red internal reflections.According to chemical and X-ray diffraction data, dalnegroite appears to be isotypic with chabournéite, Tl5-xPb2x(Sb,As)21-xS34. It is triclinic, probable space groupP1, witha= 16.217(7) Å,b= 42.544(9) Å,c= 8.557(4) Å, α = 95.72(4)°, β = 90.25(4)°, γ = 96.78(4)°,V= 5832(4) Å3,Z= 4.The nine strongest powder-diffraction lines [d(Å) (I/I0) (hkl)] are: 3.927 (100) (10 0); 3.775 (45) (22); 3.685 (45) (60); 3.620 (50) (440); 3.124 (50) (2); 2.929 (60) (42); 2.850 (70) (42); 2.579 (45) (02); 2.097 (60) (024). The mean of 11 electron microprobe analyses gave elemental concentrations as follows: Pb 10.09(1) wt.%, Tl 20.36(1), Sb 23.95(1), As 21.33(8), S 26.16(8), totalling 101.95 wt.%, corresponding to Tl4.15Pb2.03(As11.86Sb8.20)S34. The new mineral is named for Alberto Dal Negro, Professor in Mineralogy and Crystallography at the University of Padova since 1976.

Mechanical Spectroscopy Investigation of Liquid Pb-Bi Alloys

2012 ◽  
Vol 184 ◽  
pp. 434-439 ◽  
Author(s):  
Roberto Montanari ◽  
Alessandra Varone
Keyword(s):  
Distribution Functions ◽  
X Ray Diffraction ◽  
Mechanical Spectroscopy ◽  
X Ray ◽  
Neutron Spallation Source ◽  
Driven System ◽  
Spallation Source ◽  
Accelerator Driven System ◽  
The Mean ◽  
Diffraction Patterns

Liquid Pb–Bi eutectic alloy has been selected as coolant and neutron spallation source for the development of MYRRHA, an accelerator driven system. The alloy has been characterized in liquid state from melting (125 °C) to 650 °C by mechanical spectroscopy. Experiments have been carried out using hollow reeds of austenitic stainless steel filled with the Pb-Bi alloy and sealed at the extremities. From 350 °C to 520 °C modulus shows a remarkable drop accompanied by a broad internal friction maximum. In the same temperature range radial distribution functions, determined from X-ray diffraction patterns, evidenced variations of the mean distance between the 1st nearest neighbour atoms. The anelastic phenomena have been attributed to a structural re-arrangement of liquid metal. For comparison, other alloys of the Pb-Bi system with hypo-eutectic composition have been investigated.

The Use of the Pseudo-Voigt Function in the Variance Method of X-ray Line-Broadening Analysis

1997 ◽  
Vol 30 (4) ◽  
pp. 427-430 ◽  
Author(s):  
F. Sánchez-Bajo ◽  
F. L. Cumbrera
Keyword(s):  
Crystallite Size ◽  
Original Form ◽  
Line Broadening ◽  
X Ray Diffraction ◽  
Stabilized Zirconia ◽  
X Ray ◽  
Variance Method ◽  
The Mean ◽  
Voigt Function

A modified application of the variance method, using the pseudo-Voigt function as a good approximation to the X-ray diffraction profiles, is proposed in order to obtain microstructural quantities such as the mean crystallite size and root-mean-square (r.m.s.) strain. Whereas the variance method in its original form is applicable only to well separated reflections, this technique can be employed in the cases where there is line-profile overlap. Determination of the mean crystallite size and r.m.s. strain for several crystallographic directions in a nanocrystalline cubic sample of 9-YSZ (yttria-stabilized zirconia) has been performed by means of this procedure.

Ionic conductivity in nanocrystalline Gd doped ceria

2008 ◽  
Vol 1122 ◽  
Author(s):  
Gianguido Baldinozzi ◽  
David Simeone ◽  
Dominique Gosset ◽  
Mickael Dollé ◽  
Georgette Petot-Ervas
Keyword(s):  
Grain Size ◽  
Ionic Conductivity ◽  
Sol Gel ◽  
Doped Ceria ◽  
Narrow Size Distribution ◽  
Conductivity Measurements ◽  
X Ray Diffraction ◽  
X Ray ◽  
Grain Sizes ◽  
The Impact

AbstractWe have synthesized Gd-doped ceria polycrystalline samples (5, 10, 15 %mol), having relative densities exceeding 95% and grain sizes between 30 and 160 nm after axial hot pressing (750 °C, 250 MPa). The samples were prepared by sintering nanopowders obtained by sol-gel chemistry methods having a very narrow size distribution centered at about 16 nm. SEM and X-ray diffraction were performed to characterize the sample microstructures and to assess their structures. We report ionic conductivity measurements using impedance spectroscopy. It is important to investigate the properties of these systems with sub-micrometric grains and as a function of their composition. Therefore, samples having micrometric and nanometric grain sizes (and different Gd content) were studied. Evidence of Gd segregation near the grain boundaries is given and the impact on the ionic conductivity, as a function of the grain size and Gd composition, is discussed and compared to microcrystalline samples.

Sign in / Sign up

Export Citation Format

Share Document