scholarly journals Microstructures and Wear Resistance of CoCrFeNi2V0.5Tix High-Entropy Alloy Coatings Prepared by Laser Cladding

Crystals ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 352
Author(s):  
Yaning Li ◽  
Hui Liang ◽  
Qiuxin Nie ◽  
Zhaoxin Qi ◽  
Dewei Deng ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Laser Cladding ◽  
Adhesive Wear ◽  
High Entropy Alloy ◽  
Oxidative Wear ◽  
Body Centered Cubic ◽  
Wear Properties ◽  
Rich Phase ◽  
High Entropy ◽  
Ti Content

CoCrFeNi2V0.5Tix high entropy alloy coatings were synthesized by laser cladding on Ti-6Al-4V (annotated as TC4) substrate. The microstructures, hardness, and wear properties of the coatings were studied in detail. The results showed that these coatings were all composed of body-centered cubic (BCC) solid solution, (Co,Ni)Ti2 phase, and Ti-rich phase. With the increase of Ti content (x in the range of 0–1.0), the hardness of these coatings (about 960 HV) was basically unchanged and stabilized, whereas, when x was increased to 1.25, the correspondent hardness was decreased significantly to about 830 HV. Compared with original substrate, the wear resistance of high-entropy alloy (HEA) coatings was greatly improved. In particular, CoCrFeNi2V0.5Ti0.75 (donated as Ti0.75) exhibited the lowest wear rate, width, and depth of tracks of wear, indicating the best wear resistance. Moreover, the wear mechanisms of Ti0.75 coating were mainly adhesive wear and oxidative wear.

scholarly journals Effects of Boron Content on Microstructure and Wear Properties of FeCoCrNiBx High-Entropy Alloy Coating by Laser Cladding

2019 ◽  
Vol 10 (1) ◽  
pp. 49 ◽  
Author(s):  
Dezheng Liu ◽  
Jing Zhao ◽  
Yan Li ◽  
Wenli Zhu ◽  
Liangxu Lin
Keyword(s):  
Wear Resistance ◽  
Laser Cladding ◽  
Alloy Coating ◽  
Rolling Friction ◽  
Substrate Material ◽  
High Entropy Alloy ◽  
Face Centered Cubic ◽  
Micro Hardness ◽  
Wear Properties ◽  
High Entropy

The FeCoCrNiBx high-entropy alloy (HEA) coatings with three different boron (B) contents were synthesized on Q245R steel (American grade: SA515 Gr60) by laser cladding deposition technology. Effects of B content on the microstructure and wear properties of FeCoCrNiBx HEA coating were investigated. In this study, the phase composition, microstructure, micro-hardness, and wear resistance (rolling friction) were investigated by X-ray diffraction (XRD), a scanning electron microscope (SEM), a micro hardness tester, and a roller friction wear tester, respectively. The FeCoCrNiBx coatings exhibited a typical dendritic and interdendritic structure, and the microstructure was refined with the increase of B content. Additionally, the coatings were found to be a simple face-centered cubic (FCC) solid solution with borides. In terms of mechanical properties, the hardness and wear resistance ability of the coating can be enhanced with the increase of the B content, and the maximum hardness value of three HEA coatings reached around 1025 HV0.2, which is higher than the hardness of the substrate material. It is suggested that the present fabricated HEA coatings possess potentials in application of wear resistance structures for Q245R steel.

Microstructure and Wear Resistance of AlFeCuCoNiCrTi1.5 High Entropy Alloy Coating on AZ91D Magnesium Alloys by Laser Cladding

2014 ◽  
Vol 644-650 ◽  
pp. 4766-4771
Author(s):  
Kai Jin Huang ◽  
Yu Yue Wang ◽  
Xin Lin
Keyword(s):  
Wear Resistance ◽  
Abrasive Wear ◽  
Magnesium Alloys ◽  
Laser Cladding ◽  
Wear Test ◽  
Dry Sliding Wear ◽  
High Entropy Alloy ◽  
Solid Solution Phase ◽  
Wear Properties ◽  
High Entropy

To improve the wear properties of AZ91D magnesium alloys, a AlFeCuCoNiCrTi1.5high entropy alloy (HEA) coating was fabricated on AZ91D magnesium alloys by laser cladding using mixed powders of Al, Fe, Cu, Co, Ni, Cr, and Ti. The microstructure of the HEA coating was characterized by OM, SEM, and XRD. The wear resistance of the HEA coating was evaluated under dry sliding wear test condition at room temperature. The results show that the HEA coating mainly consists of a simple BCC solid solution phase. The HEA coating exhibits excellent wear resistance. The main wear mechanisms of the HEA coating and the AZ91D substrate were different, the former dominated by oxidative abrasive wear and the latter suffered from both adhesive and abrasive wear.

Microstructure and Wear Resistance of Cu0.9NiAlCoCrFe High Entropy Alloy Coating on AZ91D Magnesium Alloys by Laser Cladding

2014 ◽  
Vol 989-994 ◽  
pp. 246-250 ◽  
Author(s):  
Kai Jin Huang ◽  
Yu Yue Wang ◽  
Xin Lin
Keyword(s):  
Wear Resistance ◽  
Abrasive Wear ◽  
Magnesium Alloys ◽  
Laser Cladding ◽  
Wear Test ◽  
Dry Sliding Wear ◽  
High Entropy Alloy ◽  
Solid Solution Phase ◽  
Wear Properties ◽  
High Entropy

To improve the wear properties of AZ91D magnesium alloys, a Cu0.9NiAlCoCrFe high entropy alloy (HEA) coating was fabricated on AZ91D magnesium alloys by laser cladding using prealloyed Cu0.9NiAlCoCrFe powders. The microstructure of the HEA coating was characterized by OM, SEM and XRD. The wear resistance of the HEA coating was evaluated under dry sliding wear test condition at room temperature. The results show that the HEA coating mainly consists of a simple BCC solid solution phase. The HEA coating exhibits excellent wear resistance. The main wear mechanisms of the HEA coating and the AZ91D substrate were different, the former dominated by oxidative abrasive wear and the latter suffered from both adhesive and abrasive wear.

Microstructures and Wear Resistance of Al1.5CrFeNiTi0.5 and Al1.5CrFeNiTi0.5W0.5 High Entropy Alloy Coatings Manufactured by Laser Cladding

2019 ◽  
Vol 956 ◽  
pp. 154-159 ◽  
Author(s):  
Hui Liang ◽  
Bing Yang Gao ◽  
Ya Ning Li ◽  
Qiu Xin Nie ◽  
Zhi Qiang Cao
Keyword(s):  
Wear Resistance ◽  
Laser Cladding ◽  
Dendritic Structure ◽  
Laves Phase ◽  
High Entropy Alloy ◽  
Second Phase ◽  
Laves Phases ◽  
High Entropy ◽  
Two Phases ◽  
Bcc Phase

For the purpose of expanding the application scope of HEA coating manufactured on the surface modification of materials, in this work, the Al1.5CrFeNiTi0.5 and Al1.5CrFeNiTi0.5W0.5 HEA coatings were successfully manufactured using laser cladding method on SUS304. The microstructures and wear resistance of coatings are researched systematically. It is found that the W0 and W0.5 HEA coatings all exhibit the dendritic structure, which are constituted by BCC phases and Laves phases. With W element addition, the phase structures of W0.5 coating remain unchanged. W is dissolved in both two phases, but the solid solubility in Laves phase is higher compared to that in BCC phase. W0.5 coating with the highest microhardness of 848.34 HV, and the W0 coating with the microhardness of 811.45 HV, both of whose microhardness are four times more than that of SUS304 substrate. Among all samples, the W0.5 coating shows the optimal wear performance because of its larger content of hard second phase ( Laves phase).

scholarly journals Microstructure Evolution and Properties of Laser Cladding CoCrFeNiTiAlx High-Entropy Alloy Coatings

Coatings ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 373 ◽  
Author(s):  
Yiku Xu ◽  
Zhiyuan Li ◽  
Jianru Liu ◽  
Yongnan Chen ◽  
Fengying Zhang ◽  
...  
Keyword(s):  
Corrosion Resistance ◽  
Laser Cladding ◽  
Laves Phase ◽  
High Entropy Alloy ◽  
Body Centered Cubic ◽  
Phase Constitution ◽  
High Entropy ◽  
Al Content ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance

High-entropy alloy (HEA) coatings of CoCrFeNiTiAlx (x = 0, 0.5, 1, 1.5, 2) were prepared on the surface of AISI1045 steel by laser cladding. The effects of the Al content on the microstructure, composition, phase constitution, and wear and corrosion resistance of the coatings were investigated. The results showed that when increasing the Al element content from 0 to 0.5, the phase constitution of the CoCrFeNiTiAlx coating changed from a single Face-centered cubic (FCC) phase to Body-centered cubic 1 (BCC1) and Body-centered cubic 2 (BCC2) phases, with a small amount of Laves phase, which obviously improved the friction and corrosion resistance of the coating. With further enhancing of the Al content, the amount of BCC1 phase increased, while the BCC2 phase and the Laves phase decreased. The CoCrFeNiTiAl2 HEA coating transformed into a single BCC1 phase, with retrogressive wear and corrosion resistance. It was found that the Al0.5 alloy coating exhibits excellent wear resistance, high hardness, and corrosion resistance in a 3.5 wt.% NaCl solution. Furthermore, the effect of the Al content on the microstructure, phase, and the relating properties of the CoCrFeNiTiAlx HEA coatings is also discussed.

scholarly journals Wear and Corrosion Resistance of Al0.5CoCrCuFeNi High-Entropy Alloy Coating Deposited on AZ91D Magnesium Alloy by Laser Cladding

Entropy ◽  
2018 ◽  
Vol 20 (12) ◽  
pp. 915 ◽  
Author(s):  
Kaijin Huang ◽  
Lin Chen ◽  
Xin Lin ◽  
Haisong Huang ◽  
Shihao Tang ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Corrosion Resistance ◽  
Magnesium Alloy ◽  
Laser Cladding ◽  
Alloy Coating ◽  
High Entropy Alloy ◽  
High Entropy ◽  
Az91d Magnesium Alloy ◽  
Wear And Corrosion ◽  
Wear And Corrosion Resistance

In order to improve the wear and corrosion resistance of an AZ91D magnesium alloy substrate, an Al0.5CoCrCuFeNi high-entropy alloy coating was successfully prepared on an AZ91D magnesium alloy surface by laser cladding using mixed elemental powders. Optical microscopy (OM), scanning electron microscopy (SEM), and X-ray diffraction were used to characterize the microstructure of the coating. The wear resistance and corrosion resistance of the coating were evaluated by dry sliding wear and potentiodynamic polarization curve test methods, respectively. The results show that the coating was composed of a simple FCC solid solution phase with a microhardness about 3.7 times higher than that of the AZ91D matrix and even higher than that of the same high-entropy alloy prepared by an arc melting method. The coating had better wear resistance than the AZ91D matrix, and the wear rate was about 2.5 times lower than that of the AZ91D matrix. Moreover, the main wear mechanisms of the coating and the AZ91D matrix were different. The former was abrasive wear and the latter was adhesive wear. The corrosion resistance of the coating was also better than that of the AZ91D matrix because the corrosion potential of the former was more positive and the corrosion current was smaller.

scholarly journals Microstructures and Wear Resistance of FeCoCrNi-Mo High Entropy Alloy/Diamond Composite Coatings by High Speed Laser Cladding

Coatings ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 300 ◽  
Author(s):  
Haijiang Wang ◽  
Wei Zhang ◽  
Yingbo Peng ◽  
Mingyang Zhang ◽  
Shuyu Liu ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Composite Coating ◽  
Laser Cladding ◽  
High Speed ◽  
Composite Coatings ◽  
Scanning Speed ◽  
High Entropy Alloy ◽  
Dilution Ratio ◽  
High Entropy ◽  
High Scanning Speed

FeCoCrNi-Mo high entropy alloy/diamond composite coatings were successfully prepared by high speed laser cladding. A high scanning speed was adopted (>30 mm/s), and the effects of laser power, scanning speed, and diamond content on the microstructure and wear resistance of the composite coating were studied. The processing parameters of laser cladding had significant influence on the dilution ratio, graphitization of diamond, and wear resistance of the composite coatings. When the laser cladding parameters were 3000 W of laser power and the high scanning speed of 50 mm/s, the composite coating exhibited a uniform microstructure, the lowest dilution ratio, and the best wear resistance. The wear resistance of the composite coating was enhanced with the addition of diamond, but microcracks also increased. When the amount of diamond was 15 wt.%, the best combination of microstructures and wear resistance was obtained.

scholarly journals Investigation into Microstructure, Wear Resistance in Air and NaCl Solution of AlCrCoNiFeCTax High-Entropy Alloy Coatings Fabricated by Laser Cladding

Coatings ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 358
Author(s):  
Peng Zhao ◽  
Jun Li ◽  
Ruyan Lei ◽  
Baige Yuan ◽  
Manman Xia ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Laser Cladding ◽  
High Hardness ◽  
Atomic Radius ◽  
High Entropy Alloy ◽  
Dispersion Strengthening ◽  
Nacl Solution ◽  
High Entropy ◽  
Wear Rates ◽  
Significant Difference

AlCrCoNiFeCTax (x = 0, 0.5 and 1.0) high-entropy alloys coatings were synthesized on 45# steel by laser cladding. The microstructural evolution of the coatings with the change in x was analyzed in detail. The effect of Ta content on the wear behaviors of the coatings at different circumstances (in air and 3.5 wt.% NaCl solution) was especially highlighted. The microstructure presented the following change: equiaxed BCC (Body Centered Cubic) grains + fine MC (carbide, M = Al, Cr, Co and Ni) particles (x = 0) → equiaxed BCC grains + coarse TaC blocks + fine TaC particles (x = 0.5) → flower-like BCC grains + coarse TaC blocks + eutecticum (BCC + TaC) (x = 1.0). The average microhardness of the coatings demonstrated an upward tendency with increasing x due to the combination of the stronger solid solution and dispersion strengthening from the significant difference in atomic radius between Ta and Fe and the formation of TaC with an extremely high hardness. The wear rates of the coatings were gradually reduced both in air and in NaCl solution along with the increase in Ta content, which were lower than those of the substrate. The wear rates of the coatings with x = 0.5 and 1.0 in NaCl solution were slightly reduced by about 17% and 12% when compared with those in air. However, the values of the substrate and the coating without Ta in NaCl solution were sharply enhanced by 191% and 123% when compared with those in air. This indicated that the introduction of Ta contributed to the improvement in wear resistance both in air and in NaCl solution.

Microstructures and Wear Resistance of AlCrFeNi2W0.2Nbx High-Entropy Alloy Coatings Prepared by Laser Cladding

2019 ◽  
Vol 28 (6) ◽  
pp. 1318-1329 ◽  
Author(s):  
Hui Liang ◽  
Hongwei Yao ◽  
Dongxu Qiao ◽  
Shuang Nie ◽  
Yiping Lu ◽  
...  
Keyword(s):  
Wear Resistance ◽  
Laser Cladding ◽  
High Entropy Alloy ◽  
High Entropy
Sign in / Sign up

Export Citation Format

Share Document