scholarly journals Fine Fabrication and Optical Waveguide Characteristics of Hexagonal tris(8-hydroxyquinoline)aluminum(Ⅲ) (Alq3) Crystal

Crystals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 260
Author(s):  
Jungwoon Park ◽  
Seokho Kim ◽  
Jinho Choi ◽  
Sung Ho Yoo ◽  
Seongjae Oh ◽  
...  
Keyword(s):  
Optical Waveguide ◽  
Molecular Assembly ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Charge Coupled Device ◽  
Luminescence Efficiency ◽  
Communication Devices ◽  
Degree Of Crystallization ◽  
Laser Confocal Microscope ◽  
Control Degree

Herein, we reported on the precise growth and optical waveguide characteristics of hexagonal tris(8-hydroxyquinoline)aluminum(Ⅲ) (Alq3) micro-crystals (MCs). The hexagonal Alq3 MCs were prepared using surfactant-assisted assembly growth with the help of cetyltrimethylammoniumbromide (CTAB), in which the crystallization occurred as a result of molecular assembly and packing. Also, we adjusted the molar ratio of Alq3 and CTAB for the control degree of crystallization. The formation and structure of Alq3 MCs were investigated using field-emission scanning electron microscopy and X-ray diffraction pattern experiments, respectively. The solid-state laser confocal microscope-photoluminescence spectra and charge-coupled device images for the Alq3 MCs were measured to study the luminescence efficiency and colors, respectively. The optical waveguide performance of the hexagonal Alq3 MCs was measured for each side direction. According to our results, crystalline Alq3 micro-crystals are promising materials for application to the development of optical communication devices.

On the Properties of an Ion Conductive System Incorporated in Hybrid Films

2000 ◽  
Vol 628 ◽  
Author(s):  
G. González ◽  
P. J. Retuert ◽  
S. Fuentes
Keyword(s):  
Electrochemical Impedance ◽  
Ternary Phase Diagram ◽  
Lithium Perchlorate ◽  
Molar Ratio ◽  
Ionic Conductors ◽  
X Ray Diffraction ◽  
Poly Ethylene Oxide ◽  
Ion Conducting ◽  
Poly Ethylene ◽  
High Degree

ABSTRACTBlending the biopolymer chitosan (CHI) with poly (aminopropilsiloxane) oligomers (pAPS), and poly (ethylene oxide) (PEO) in the presence of lithium perchlorate lead to ion conducting products whose conductivity depends on the composition of the mixture. A ternary phase diagram for mixtures containing 0.2 M LiClO4 shows a zone in which the physical properties of the products - transparent, flexible, mechanically robust films - indicate a high degree of molecular compatibilization of the components. Comparison of these films with binary CHI-pAPS nanocomposites as well as the microscopic aspect, thermal behavior, and X-ray diffraction pattern of the product with the composition PEO/CHI/pAPS/LiClO4 1:0.5:0.6:0.2 molar ratio indicates that these films may be described as a layered nanocomposite. In this composite, lithium species coordinated by PEO and pAPS should be inserted into chitosan layers. Electrochemical impedance spectroscopy measurements indicate the films are pure ionic conductors with a maximal bulk conductivity of 1.7*10-5 Scm-1 at 40 °C and a sample-electrode interface capacitance of about 1.2*10-9 F.

Effect of Hydrated Metal Salts on the Coordination Product of Cobalt(II) halide and PNP Type Ligand, 2,6-bis(di-tertbutylphosphinomethyl) pyridine

2018 ◽  
Author(s):  
Tasneem Siddiquee ◽  
Abdul Goni
Keyword(s):  
Metal Salts ◽  
Molar Ratio ◽  
Pincer Complexes ◽  
Asymmetric Unit ◽  
X Ray Diffraction ◽  
Pincer Ligand ◽  
Tetrahedral Geometry ◽  
X Ray ◽  
Distorted Tetrahedral Geometry ◽  
Cobalt Center

Chemical treatment of CoX<sub>2</sub><b><sup>. </sup></b>6H<sub>2</sub>O (X = Cl, Br, I) with the potentially tridentate PNP pincer ligand 2,6-bis(di-<i>tert</i>-butylphosphinomethyl)pyridine in 1:1 molar ratio results in cobalt(II) halide-PNP pincer complexes. The effect of the hydrated metal source on molecular structure and geometry of the complexes was studied by single crystal X-ray diffraction analysis. The complexes are neutral and the cobalt center adopts a penta-coordinate system with potential atropisomerization. Within the unit cell there are two distinct molecules per asymmetric unit. One of the two phosphorus atoms in the PNP ligand was observed to be partially oxidized to phosphinoxide. Disorder in the structure reflects a mixture of square pyramidal and distorted tetrahedral geometry.

scholarly journals Photocatalytic Reduction of CO2 to Methanol Using a Copper-Zirconia Imidazolate Framework

Catalysts ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 346
Author(s):  
Sonam Goyal ◽  
Maizatul Shima Shaharun ◽  
Ganaga Suriya Jayabal ◽  
Chong Fai Kait ◽  
Bawadi Abdullah ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalyst Support ◽  
Oxidation Potential ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
X Ray ◽  
Molar Ratios ◽  
Optimum Parameters ◽  
Reduction Of Co2 ◽  
Enhanced Yield

A set of novel photocatalysts, i.e., copper-zirconia imidazolate (CuZrIm) frameworks, were synthesized using different zirconia molar ratios (i.e., 0.5, 1, and 1.5 mmol). The photoreduction process of CO2 to methanol in a continuous-flow stirred photoreactor at pressure and temperature of 1 atm and 25 °C, respectively, was studied. The physicochemical properties of the synthesized catalysts were studied using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectroscopy. The highest methanol activity of 818.59 µmol/L.g was recorded when the CuZrIm1 catalyst with Cu/Zr/Im/NH4OH molar ratio of 2:1:4:2 (mmol/mmol/mmol/M) was employed. The enhanced yield is attributed to the presence of Cu2+ oxidation state and the uniformly dispersed active metals. The response surface methodology (RSM) was used to optimize the reaction parameters. The predicted results agreed well with the experimental ones with the correlation coefficient (R2) of 0.99. The optimization results showed that the highest methanol activity of 1054 µmol/L.g was recorded when the optimum parameters were employed, i.e., stirring rate (540 rpm), intensity of light (275 W/m2) and photocatalyst loading (1.3 g/L). The redox potential value for the CuZrIm1 shows that the reduction potential is −1.70 V and the oxidation potential is +1.28 V for the photoreduction of CO2 to methanol. The current work has established the potential utilization of the imidazolate framework as catalyst support for the photoreduction of CO2 to methanol.

scholarly journals One-step synthesis of nitrogen-grafted copper-gallic acid for enhanced methylene blue removal

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Shella Permatasari Santoso ◽  
Vania Bundjaja ◽  
Artik Elisa Angkawijaya ◽  
Chintya Gunarto ◽  
Alchris Woo Go ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Adsorption Capacity ◽  
Gallic Acid ◽  
Synthesis Method ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Temperature Dependent ◽  
One Step ◽  
Detailed Assessment ◽  
Higher Temperature

AbstractNitrogen-grafting through the addition of glycine (Gly) was performed on a metal- phenolic network (MPN) of copper (Cu2+) and gallic acid (GA) to increase its adsorption capacity. Herein, we reported a one-step synthesis method of MPN, which was developed according to the metal–ligand complexation principle. The nitrogen grafted CuGA (Ng-CuGA) MPN was obtained by reacting Cu2+, GA, and Gly in an aqueous solution at a molar ratio of 1:1:1 and a pH of 8. Several physicochemical measurements, such as Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), N2 sorption, X-ray diffraction (XRD), and thermal gravimetry analysis (TGA), were done on Ng-CuGA to elucidate its characteristics. The analysis revealed that the Ng-CuGA has non-uniform spherical shaped morphology with a pore volume of 0.56 cc/g, a pore size of 23.25 nm, and thermal stability up to 205 °C. The applicational potential of the Ng-CuGA was determined based on its adsorption capacity against methylene blue (MB). The Ng-CuGA was able to adsorb 190.81 mg MB per g adsorbent at a pH of 6 and temperature of 30 °C, which is 1.53 times higher than the non-grafted CuGA. Detailed assessment of Ng-CuGA adsorption properties revealed their pH- and temperature-dependent nature. The adsorption capacity and affinity were found to decrease at a higher temperature, demonstrating the exothermic adsorption behavior.

scholarly journals Relationship between the Stereocomplex Crystallization Behavior and Mechanical Properties of PLLA/PDLA Blends

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1851
Author(s):  
Hye-Seon Park ◽  
Chang-Kook Hong
Keyword(s):  
Mechanical Properties ◽  
Lactic Acid ◽  
Crystallization Behavior ◽  
Mechanical Analysis ◽  
X Ray Diffraction ◽  
Nucleation Agent ◽  
Scanning Calorimetry ◽  
Nucleation Sites ◽  
Wide Range ◽  
Degree Of Crystallization

Poly (l-lactic acid) (PLLA) is a promising biomedical polymer material with a wide range of applications. The diverse enantiomeric forms of PLLA provide great opportunities for thermal and mechanical enhancement through stereocomplex formation. The addition of poly (d-lactic acid) (PDLA) as a nucleation agent and the formation of stereocomplex crystallization (SC) have been proven to be an effective method to improve the crystallization and mechanical properties of the PLLA. In this study, PLLA was blended with different amounts of PDLA through a melt blending process and their properties were calculated. The effect of the PDLA on the crystallization behavior, thermal, and mechanical properties of PLLA were investigated systematically by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), X-ray diffraction (XRD), polarized optical microscopy (POM), dynamic mechanical analysis (DMA), and tensile test. Based on our findings, SC formed easily when PDLA content was increased, and acts as nucleation sites. Both SC and homo crystals (HC) were observed in the PLLA/PDLA blends. As the content of PDLA increased, the degree of crystallization increased, and the mechanical strength also increased.

Application of vermiculite and limestone to desulphurization and to the removal of dust during briquette combustion

2003 ◽  
Vol 67 (6) ◽  
pp. 1243-1251 ◽  
Author(s):  
A. Lu ◽  
D. Zhao ◽  
J. Li ◽  
C. Wang ◽  
S. Qin
Keyword(s):  
Electron Microscopy ◽  
Coal Combustion ◽  
Combustion Temperature ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Retention Ratio ◽  
X Ray ◽  
Major Factors ◽  
Chemical Reactant ◽  
Scanning Electron

AbstractSmall domestic cooking furnaces are widely used in China. These cooking furnaces release SO2 gas and dust into the atmosphere and cause serious air pollution. Experiments were conducted to investigate the effects of vermiculite, limestone or CaCO3, and combustion temperature and time on desulphurization and dust removal during briquette combustion in small domestic cooking furnaces. Additives used in the coal are vermiculite, CaCO3 and bentonite. Vermiculite is used for its expansion property to improve the contact between CaCO3 and SO2 and to convey O2 into the interior of briquette; CaCO3 is used as a chemical reactant to react with SO2 to form CaSO4; and bentonite is used to develop briquette strength. Expansion of vermiculite develops loose interior structures, such as pores or cracks, inside the briquette, and thus brings enough oxygen for combustion and sulphation reaction. Effective combustion of the original carbon reduces amounts of dust in the fly ash. X-ray diffraction, optical microscopy, and scanning electron microscopy with energy dispersive X-ray analysis show that S exists in the ash only as anhydrite CaSO4, a product of SO2 reacting with CaCO3 and O2. The formation of CaSO4 effectively reduces or eliminates SO2 emission from coal combustion. The major factors controlling S retention are vermiculite, CaCO3 and combustion temperature. The S retention ratio increases with increasing vermiculite amount at 950°C. The S retention ratio also increases with increasing Ca/S molar ratio, and the best Ca/S ratio is 2-3 for most combustion. With 12 g of the original coal, 1 to 2 g of vermiculite, a molar Ca/S ratio of 2.55 by adding CaCO3, and some bentonite, a S retention ratio >65% can be readily achieved. The highest S retention ratio of 97.9% is achieved at 950°C with addition of 2 g of vermiculite, a Ca/S ratio of 2.55 and bentonite.

scholarly journals Clozapine-carboxylic acid plasticized co-amorphous dispersions: Preparation, characterization and solution stability evaluation

2015 ◽  
Vol 65 (2) ◽  
pp. 133-146 ◽  
Author(s):  
Ahmed Mahmoud Abdelhaleem Ali ◽  
Adel Ahmed Ali ◽  
Ibrahim Abdullah Maghrabi
Keyword(s):  
Carboxylic Acid ◽  
Tartaric Acid ◽  
Molar Ratio ◽  
Sublingual Administration ◽  
Solution Stability ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
Great Chance ◽  
Amorphous Dispersions ◽  
Pass Metabolism

Abstract This study addressed the possibility of forming of co-amorphous systems between clozapine (CZ) and various carboxylic acid plasticizers (CAPs). The aim was to improve the solubility and oral bioavailability of clozapine. Co-amorphous dispersions were prepared using modified solvent evaporation methodology at drug/plasticizer stoichiometric ratios of 1:1, 1:1.5 and 1:2. Solid state characterization was performed using differential scanning calorimetry, X-ray diffraction and infra red spectroscopy. Highly soluble homogeneous co-amorphous dispersions were formed between clozapine and CAPs via hydrogen bonding. The co-amorphous dispersions formed with tartaric acid (1:2) showed the highest dissolution percentage (> 95 % in 20 minutes) compared to pure crystalline CZ (56 %). Highly stable solutions were obtained from co-amorphous CZ-citric and CZ-tartaric acid at 1:1.5 molar ratio. The prepared dispersions suggest the possibility of peroral or sublingual administration of highly soluble clozapine at a reduced dose with the great chance to bypass the first pass metabolism.

Preparation of Silica-Supported Nickel Molybdenum Phosphides by Temperature-Programmed Reduction Technique

2007 ◽  
Vol 124-126 ◽  
pp. 1765-1768 ◽  
Author(s):  
So Yeon Lee ◽  
Yong Kul Lee ◽  
S.Ted Oyama ◽  
Seok Hee Lee ◽  
Hee Chul Woo
Keyword(s):  
Single Phase ◽  
Reduction Rate ◽  
Reduction Reaction ◽  
Molar Ratio ◽  
Infrared Spectrometry ◽  
Molybdenum Oxides ◽  
Temperature Programmed Reduction ◽  
X Ray Diffraction ◽  
Ammonium Hydrogen ◽  
Temperature Programmed

Silica supported nickel molybdenum phosphides (NiMoP/SiO2) were successfully prepared by temperature-programmed reduction (TPR) reaction of phosphorous-impregnated nickel molybdenum oxides (NiMoO4) precursors with hydrogen at relatively low temperatures (530 – 590 oC) and characterized by Fourier transform-Infrared spectrometry (FT-IR), X-ray diffraction (XRD), Electron probe microanalysis (EPMA) and Temperature-programmed reduction reaction (TPR). The process of solid transformation and properties of materials prepared from ammonium hydrogen phosphate (AMP)-impregnated samples were compared with those of phosphide made from phosphoric acid (PAC)-impregnated samples. Results show that the formation of a single NiMoP phase on silica significantly depends on reduction rates, phosphorous sources and phosphorous loadings. A single phase of NiMoP on SiO2 was particularly promoted at a below 5 oC/min of reduction rate and the starting molar ratio of Ni/Mo/P=1/1/1. A single phase of crystalline NiMoP on silica was produced from AMP-impregnated samples, while other phases of MoP, Ni2P, or NiMoP2 were appeared from PAC-impregnated samples with loading. The new phase of NiMoP2 was occurred with increasing phosphorous loading (above Ni/Mo/P=1/1/2.5) as a result of facilitated contact on the surface between the Ni-Mo bimetallic component and the phosphorous reagent

Immobilization of K7PW11O39 on ZrO2 Nanofiber: Ultra-deep Desulfurization Based in Extraction Catalytic Oxidation Desulfurization System

2021 ◽  
Vol 72 (3) ◽  
pp. 89-101
Author(s):  
Guowei Zeng ◽  
Guihong Wu ◽  
Zhihui Wang ◽  
Xiaonan Li ◽  
Jie Yang ◽  
...  
Keyword(s):  
Catalytic Oxidation ◽  
Catalytic Mechanism ◽  
Molar Ratio ◽  
X Ray Diffraction ◽  
Thermo Gravimetric ◽  
Transmission Electron ◽  
Deep Desulfurization ◽  
Thermo Gravimetric Analyzer ◽  
Ft Ir ◽  
Model Oil

In this work, K7PW11O39 (abbreviated as PW11) was immobilized on ZrO2 nanofibers and used as an efficient recyclable catalyst in extraction catalytic oxidation desulfurization system (ECODS).The 500 ppm DBT model oil(5mL) can desulphurize completely within 20 min with the catalytic conditions of 50��, 0.010 g 50 wt%- CTAB�C PW11�CZrO2 nanofibers and O/S molar ratio H2O2/DBT molar ratio�� was 2:1. The synthesized catalyst was characterized by Fourier transform infrared spectroscopy (FT-IR), powder X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) and thermo gravimetric analyzer (TGA). The results indicated the PW11�CZrO2 nanofibers were synthesized successfully and the possible catalytic mechanism is also revealed.

Preparation of Sodium Paeonolsilate Intercalated into Layered Double Hydroxides and its Release Properties

2015 ◽  
Vol 1095 ◽  
pp. 349-354 ◽  
Author(s):  
Liang Hua Gu ◽  
Hong Qing Song ◽  
Zhi Yong Sun ◽  
Ji Yong Zheng ◽  
Jin Wei Zhang ◽  
...  
Keyword(s):  
Controlled Release ◽  
Release Kinetics ◽  
Molar Ratio ◽  
Burst Release ◽  
X Ray Diffraction ◽  
Release Process ◽  
Rate Determining Step ◽  
Release Ratio ◽  
Double Hydroxide ◽  
Double Hydroxides

A controlled release composite has been prepared by intercalation of sodium paeonolsilate (PAS) into Mg/Al layered double hydroxide (LDH) with the molar ratio (M2+/M3+) of 2:1. The powder X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR) confirm the intercalation of PAS into the galleries of LDH. The chemical composites of PAS-LDH were revealed by elemental analysis. Release tests of the PAS-LDH composite showed that no burst release phenomenon occurred at the beginning stage and a high release ratio of PAS (89.8%) was obtained, exhibiting controlled release behavior. Furthermore, the parabolic diffusion model was used to simulate the release kinetics of PAS from the LDH carrier, indicating that the intraparticle diffusion via ion-exchange is the rate-determining step in the release process. It is significance in this work for introducing the PAS-LDH composite to develop antifouling materials with long-term activity.

Sign in / Sign up

Export Citation Format

Share Document