scholarly journals De novo Phasing Xenons Observed in the Frog Ependymin-Related Protein

Crystals ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 32
Author(s):  
SangYoun Park

Pressurizing Xe or Kr noble gas into the protein crystal for de novo phasing has been one method of choice when the introduction of other heavy-atom compounds fails. One reason is because, unlike other heavy-atom compounds, their immobilized sites are mostly hydrophobic cavities. Previously, the structure of frog ependymin-related protein (EPDR) has been determined using a single wavelength anomalous diffraction (SAD) on a Xe-pressurized crystal. Since no report on the four Xe binding sites has been made, these sites are analyzed in this study. Of the four Xe atoms, three are found along the hydrophobic interfaces created by the two crystallographic symmetry mates of EPDR. One final Xe atom occupies a Ca2+-binding site of the native protein entirely stabilized by the polar atoms of the surrounding EDPR residues. We believe that this atypical Xe location is very unique and merits further study.

2016 ◽  
Vol 72 (11) ◽  
pp. 1174-1180 ◽  
Author(s):  
Andrew F. Bent ◽  
Greg Mann ◽  
Wael E. Houssen ◽  
Vitaliy Mykhaylyk ◽  
Ramona Duman ◽  
...  

Determination of protein crystal structures requires that the phases are derived independently of the observed measurement of diffraction intensities. Many techniques have been developed to obtain phases, including heavy-atom substitution, molecular replacement and substitution during protein expression of the amino acid methionine with selenomethionine. Although the use of selenium-containing methionine has transformed the experimental determination of phases it is not always possible, either because the variant protein cannot be produced or does not crystallize. Phasing of structures by measuring the anomalous diffraction from S atoms could in theory be almost universal since almost all proteins contain methionine or cysteine. Indeed, many structures have been solved by the so-called native sulfur single-wavelength anomalous diffraction (S-SAD) phasing method. However, the anomalous effect is weak at the wavelengths where data are normally recorded (between 1 and 2 Å) and this limits the potential of this method to well diffracting crystals. Longer wavelengths increase the strength of the anomalous signal but at the cost of increasing air absorption and scatter, which degrade the precision of the anomalous measurement, consequently hindering phase determination. A new instrument, the long-wavelength beamline I23 at Diamond Light Source, was designed to work at significantly longer wavelengths compared with standard synchrotron beamlines in order to open up the native S-SAD method to projects of increasing complexity. Here, the first novel structure, that of the oxidase domain involved in the production of the natural product patellamide, solved on this beamline is reported using data collected to a resolution of 3.15 Å at a wavelength of 3.1 Å. The oxidase is an example of a protein that does not crystallize as the selenium variant and for which no suitable homology model for molecular replacement was available. Initial attempts collecting anomalous diffraction data for native sulfur phasing on a standard macromolecular crystallography beamline using a wavelength of 1.77 Å did not yield a structure. The new beamline thus has the potential to facilitate structure determination by native S-SAD phasing for what would previously have been regarded as very challenging cases with modestly diffracting crystals and low sulfur content.


1999 ◽  
Vol 55 (2) ◽  
pp. 430-435 ◽  
Author(s):  
Christine Evrard ◽  
Jacques Fastrez ◽  
Jean-Paul Declercq

Until now, wild-type bacteriophage λ lysozyme had been impossible to crystallize. This difficulty could be overcome by the replacement of the four tryptophan residues by aza-tryptophans. Analysis of the intermolecular and intramolecular contacts in this modification allows understanding of the differences in behaviour between the native and modified molecules. Furthermore, this mutation was very useful for the creation of new heavy-atom binding sites and for the solution of the non-crystallographic symmetry, which is extremely important for phase improvement. This procedure seems to be generally applicable, at least in the search for new possibilities for heavy-atom binding sites.


2021 ◽  
Vol 17 (11) ◽  
pp. e1009620
Author(s):  
Xingjie Pan ◽  
Tanja Kortemme

A major challenge in designing proteins de novo to bind user-defined ligands with high affinity is finding backbones structures into which a new binding site geometry can be engineered with high precision. Recent advances in methods to generate protein fold families de novo have expanded the space of accessible protein structures, but it is not clear to what extend de novo proteins with diverse geometries also expand the space of designable ligand binding functions. We constructed a library of 25,806 high-quality ligand binding sites and developed a fast protocol to place (“match”) these binding sites into both naturally occurring and de novo protein families with two fold topologies: Rossman and NTF2. Each matching step involves engineering new binding site residues into each protein “scaffold”, which is distinct from the problem of comparing already existing binding pockets. 5,896 and 7,475 binding sites could be matched to the Rossmann and NTF2 fold families, respectively. De novo designed Rossman and NTF2 protein families can support 1,791 and 678 binding sites that cannot be matched to naturally existing structures with the same topologies, respectively. While the number of protein residues in ligand binding sites is the major determinant of matching success, ligand size and primary sequence separation of binding site residues also play important roles. The number of matched binding sites are power law functions of the number of members in a fold family. Our results suggest that de novo sampling of geometric variations on diverse fold topologies can significantly expand the space of designable ligand binding sites for a wealth of possible new protein functions.


2021 ◽  
Author(s):  
Xingjie Pan ◽  
Tanja Kortemme

AbstractA major challenge in designing proteins de novo to bind user-defined ligands with high specificity and affinity is finding backbones structures that can accommodate a desired binding site geometry with high precision. Recent advances in methods to generate protein fold families de novo have expanded the space of accessible protein structures, but it is not clear to what extend de novo proteins with diverse geometries also expand the space of designable ligand binding functions. We constructed a library of 25,806 high-quality ligand binding sites and developed a fast protocol to place (“match”) these binding sites into both naturally occurring and de novo protein families with two fold topologies: Rossman and NTF2. 5,896 and 7,475 binding sites could be matched to the Rossmann and NTF2 fold families, respectively. De novo designed Rossman and NTF2 protein families can support 1,791 and 678 binding sites that cannot be matched to naturally existing structures with the same topologies, respectively. While the number of protein residues in ligand binding sites is the major determinant of matching success, ligand size and primary sequence separation of binding site residues also play important roles. The number of matched binding sites are power law functions of the number of members in a fold family. Our results suggest that de novo sampling of geometric variations on diverse fold topologies can significantly expand the space of designable ligand binding sites for a wealth of possible new protein functions.Author summaryDe novo design of proteins that can bind to novel and highly diverse user-defined small molecule ligands could have broad biomedical and synthetic biology applications. Because ligand binding site geometries need to be accommodated by protein backbone scaffolds at high accuracy, the diversity of scaffolds is a major limitation for designing new ligand binding functions. Advances in computational protein structure design methods have significantly increased the number of accessible stable scaffold structures. Understanding how many new ligand binding sites can be accommodated by the de novo scaffolds is important for designing novel ligand binding proteins. To answer this question, we constructed a large library of ligand binding sites from the Protein Data Bank (PDB). We tested the number of ligand binding sites that can be accommodated by de novo scaffolds and naturally existing scaffolds with same fold topologies. The results showed that de novo scaffolds significantly expanded the ligand binding space of their respective fold topologies. We also identified factors that affect difficulties of binding site accommodation, as well as the relationship between the number of scaffolds and the accessible ligand binding site space. We believe our findings will benefit future method development and applications of ligand binding protein design.


1986 ◽  
Vol 237 (3) ◽  
pp. 781-787 ◽  
Author(s):  
D T W Bryant ◽  
S Critch

Vitamin D-dependent Ca2+-binding protein from pig duodenum was hydrolysed with trypsin in the presence of Ca2+ and two products were obtained: T1, which differed from the native protein by loss of Ac-Ser-Ala-Gln-Lys from the N-terminus and Ile-Ser-Gln-OH from the C-terminus, and T2, which differed from T1 by loss of a C-terminal lysine. The hydrolysis inactivated one of the two high-affinity Ca2+-binding sites on the native protein, and the remaining site was stable in T1 but labile in T2 when the proteins were Ca2+-free. Binding studies showed that T1 had Kd values of 2.8 +/- 0.1 nM, 57 +/- 13 microM and 0.8 +/- 0.3 microM for Ca2+, Mg2+ and Mn2+ respectively, and T2 had Kd 2.2 +/- 0.3 nM for Ca2+. The affinity for Mn2+, together with the other Kd values, identified the site on T1 as the site on the native protein previously found to have Kd 0.6 microM for Mn2+, rather than one with Kd 50 microM for Mn2+. In contrast with both the native protein and another form of the protein with a single Ca2+-binding site, the intrinsic fluorescence of T1 and T2 was little affected by the addition of Ca2+. It was concluded that the active binding site in T1 and T2, and also the site in the native protein with the higher affinity for Mn2+, was probably in the C-terminal half of the molecule.


2019 ◽  
Author(s):  
Michael Olp ◽  
Daniel Sprague ◽  
Stefan Kathman ◽  
Ziyang Xu ◽  
Alexandar Statsyuk ◽  
...  

<p>Brd4, a member of the bromodomain and extraterminal domain (BET) family, has emerged as a promising epigenetic target in cancer and inflammatory disorders. All reported BET family ligands bind within the bromodomain acetyl-lysine binding sites and competitively inhibit BET protein interaction with acetylated chromatin. Alternative chemical probes that act orthogonally to the highly-conserved acetyl-lysine binding sites may exhibit selectivity within the BET family and avoid recently reported toxicity in clinical trials of BET bromodomain inhibitors. Here, we report the first identification of a ligandable site on a bromodomain outside the acetyl-lysine binding site. Inspired by our computational prediction of hotspots adjacent to non-homologous cysteine residues within the <i>C</i>-terminal Brd4 bromodomain (Brd4-BD2), we performed a mid-throughput mass spectrometry screen to identify cysteine-reactive fragments that covalently and selectively modify Brd4. Subsequent mass spectrometry, NMR and computational docking analyses of electrophilic fragment hits revealed a novel ligandable site near Cys356 that is unique to Brd4 among all human bromodomains. This site is orthogonal to the Brd4-BD2 acetyl-lysine binding site as Cys356 modification did not impact binding of the pan-BET bromodomain inhibitor JQ1 in fluorescence polarization assays. Finally, we tethered covalent fragments to JQ1 and performed NanoBRET assays to provide proof of principle that this orthogonal site can be covalently targeted in intact human cells. Overall, we demonstrate the potential of targeting sites orthogonal to bromodomain acetyl-lysine binding sites to develop bivalent and covalent inhibitors that displace Brd4 from chromatin.</p>


1993 ◽  
Vol 58 (1) ◽  
pp. 47-52 ◽  
Author(s):  
Imad Al-Bala'a ◽  
Richard D. Bates

The role of more than one binding site on a nitroxide free radical in magnetic resonance determinations of the properties of the complex formed with a hydrogen donor is examined. The expression that relates observed hyperfine couplings in EPR spectra to complex formation constants and concentrations of each species in solution becomes much more complex when multiple binding sites are present, but reduces to a simpler form when binding at the two sites occurs independently and the binding at the non-nitroxide site does not produce significant differences in the hyperfine coupling constant in the complexed radical. Effects on studies of hydrogen bonding between multiple binding site nitroxides and hydrogen donor solvent molecules by other magnetic resonance methods are potentially more extreme.


2001 ◽  
Vol 66 (8) ◽  
pp. 1208-1218 ◽  
Author(s):  
Guofeng Li ◽  
Mira Josowicz ◽  
Jiří Janata

Structural and electronic transitions in poly(thiophenyleneiminophenylene), usually referred to as poly(phenylenesulfidephenyleneamine) (PPSA) upon electrochemical doping with LiClO4 have been investigated. The unusual electrochemical behavior of PPSA indicates that the dopant anions are bound in two energetically different sites. In the so-called "binding site", the ClO4- anion is Coulombically attracted to the positively charged S or N sites on one chain and simultaneously hydrogen-bonded with the N-H group on a neighboring polymer chain. This strong interaction causes a re-organization of the polymer chains, resulting in the formation of a networked structure linked together by these ClO4- Coulombic/hydrogen bonding "bridges". However, in the "non-binding site", the ClO4- anion is very weakly bound, involves only the electrostatic interaction and can be reversibly exchanged when the doped polymer is reduced. In the repeated cycling, the continuous and alternating influx and expulsion of ClO4- ions serves as a self-organizing process for such networked structures, giving rise to a diminishing number of available "non-binding" sites. The occurrence of these ordered structures has a major impact on the electrochemical activity and the morphology of the doped polymer. Also due to stabilization of the dopant ions, the doped polymer can be kept in a stable and desirable oxidation state, thus both work function and conductivity of the polymer can be electrochemically controlled.


1993 ◽  
Vol 13 (9) ◽  
pp. 5805-5813 ◽  
Author(s):  
M M Wang ◽  
R Y Tsai ◽  
K A Schrader ◽  
R R Reed

Genes which mediate odorant signal transduction are expressed at high levels in neurons of the olfactory epithelium. The molecular mechanism governing the restricted expression of these genes likely involves tissue-specific DNA binding proteins which coordinately activate transcription through sequence-specific interactions with olfactory promoter regions. We have identified binding sites for the olfactory neuron-specific transcription factor, Olf-1, in the sequences surrounding the transcriptional initiation site of five olfactory neuron-specific genes. The Olf-1 binding sites described define the consensus sequence YTCCCYRGGGAR. In addition, we have identified a second binding site, the U site, in the olfactory cyclic nucleotide gated channel and type III cyclase promoters, which binds factors present in all tissue examined. These experiments support a model in which expression of Olf-1 in the sensory neurons coordinately activates a set of olfactory neuron-specific genes. Furthermore, expression of a subset of these genes may be modulated by additional binding factors.


Sign in / Sign up

Export Citation Format

Share Document