scholarly journals The Secrets of Beautiful Hair: Why is it Flexible and Elastic?

Cosmetics ◽  
2019 ◽  
Vol 6 (3) ◽  
pp. 40 ◽  
Author(s):  
Mikako Ezure ◽  
Noriyuki Tanji ◽  
Yukari Nishita ◽  
Takashi Mizooku ◽  
Shinobu Nagase ◽  
...  

Beautiful hair, so called “SHINAYAKA” hair in Japanese, has a good appearance not only when stationary but also when in motion, and it is a highly desirable hair condition for Japanese consumers. We investigated such SHINAYAKA hair, which was selected by sensory evaluation, for the relationship between physical properties, such as flexibility and elasticity, and hair structure. It has already been reported that human hair cortical cells have two types, similar to wool: the ortho-like cortex and the para-like cortex. Microscopic observation revealed that the ortho-like cortex is distributed in the outer layer of the hair (near the hair surface) and the para-like cortex exists in the inner layer (near the center of the fiber). This cell distribution, a concentric double-layered structure, was deemed to be a characteristic of SHINAYAKA hair. Furthermore, analysis of physical properties showed the difference between the elasticity of the outer layer and inner layer, and that this difference was bigger in SHINAYAKA hair compared to other hair. This phenomenon was observed not only in Japanese hair, but also in Caucasian hair. In addition, we have developed a new technology for creating “SHINAYAKA” hair by treatment with succinic acid. Inflexible and inelastic hair can be changed by this treatment, and its flexibility and elasticity improve by selective reduction of stiffness of the outer layer.

Author(s):  
Fen LIN

LANGUAGE NOTE | Document text in Chinese; abstract in English only.In the dominant discourse of the "human–machine relationship," people and machines are the subjects, with a mutually shaping influence. However, this framework neglects the crux of the current critical analysis of AI. It reduces the problems with new technology to the relationship between people and machines, ignoring the re-shaping of the relationship between "people and people" in the era of new technology. This simplification may mislead policy and legal regulations for new technologies. Why would a robot killing cause more panic than a murder committed by a human? Why is a robot's misdiagnosis more troubling than a doctor's? Why do patients assume that machines make more accurate diagnoses than doctors? When a medical accident occurs, who is responsible for the mistakes of an intelligent medical system? In the framework of traditional professionalism, the relationship between doctors and patients, whether trusted or not, is based on the premise that doctors have specialized knowledge that patients do not possess. Therefore, the authority of a doctor is the authority of knowledge. In the age of intelligence, do machines provide information or knowledge? Can this strengthen or weaken the authority of doctors? It is likely that in the age of intelligence, the professionalism, authority and trustworthiness of doctors require a new knowledge base. Therefore, the de-skilling of doctors is not an issue of individual doctors, but demands an update of the knowledge of the entire industry. Recognizing this, policy makers must not focus solely on the use of machines, but take a wider perspective, considering how to promote the development of doctors and coordinate the relationship between doctors with different levels of knowledge development. We often ask, "In the era of intelligence, what defines a human?" This philosophical thinking should be directed toward not only the difference between machines and people as individuals, but also how the relationship between human beings, i.e., the social nature of humans, evolves in different technological environments. In short, this commentary stresses that a "good" machine or an "evil" machine—beyond the sci-fi romance of such discourse—reflects the evolution of the relationships between people. In today's smart age, the critical issue is not the relationship between people and machines. It is how people adjust their relationships with other people as machines become necessary tools in life. In the era of intelligence, therefore, our legislation, policy and ethical discussion should resume their focus on evolutionary relationships between people.DOWNLOAD HISTORY | This article has been downloaded 41 times in Digital Commons before migrating into this platform.


1985 ◽  
Vol 6 ◽  
pp. 146-149 ◽  
Author(s):  
H. Murase ◽  
K. Nanishi

The purpose of this work is to study the relationship of energetic and physical properties of polymetric materials with ice adhesion, and to develop the material to prevent ice adhesion. From various parameters of water and ice, dispersion and hydrogen bond contribution of surface free energy of ice were calculated. Using these values and that of contact angle formed between Ice and polymer in the air and also in paraffin, work of adhesion W-πe and W were determined respectively. The difference W-(W-πe ) has made it possible to evaluate the effect of surface pressure n on ice adhesion. On the other hand, actual adhesive strength of ice was measured. Some correlations between theoretical and observed values were found. Further, visco-elastic properties of polymers below icing temperature and temperature dependence of strain in the ice/polymer system were investigated. The results showed some characteristics of polymers which are related to molecular mobility at lower temperature, are effective in reducing the adhesive strength to ice. Numerous attempts were made to develop coating materials to prevent ice adhesion. A composite polymer composition, which has peculiar ingredients and structure, was proposed and found to provide the ability for the lowest ice adhesion. Ice preventive mechanism of the film was discussed.


2020 ◽  
Vol 54 (1) ◽  
pp. qjegh2020-021
Author(s):  
Ji-wei Zhang ◽  
Julian Murton ◽  
Shu-jie Liu ◽  
Li-li Sui ◽  
Song Zhang ◽  
...  

Determining the development of artificial frozen walls by present methods is challenging where substantial seepage occurs because fixed monitoring points only indicate physical properties in small areas. Here we use ultrasonic acoustic methods to determine the physical properties between two freezing pipes during freezing. Sensitivity analysis indicates that wave velocity is sensitive to physical properties, and the sensitivity rank is water content > temperature > density. The attenuation coefficient has a low sensitivity to physical parameters, whereas dominant frequency is sensitive to temperature and water content but insensitive to density. Wave velocity increases with temperature and density in a quadratic relationship, and with water content in a linear relationship. Dominant frequency increases with temperature and water content in a quadratic relationship. A multiple regression model of wave velocity and dominant frequency established by stepwise regression can be used to predict the relationship between wave velocity and temperature of frozen fine sand in different areas where the soil properties are similar to those reported here. Wave velocity and dominant frequency measured in the laboratory can be used to predict the relationship between acoustic parameters and temperature in field conditions after curve move based on the first data point from field measurements. The procedure of curve moving involves calculating the difference in value of the first data point between laboratory and field measurements at the same temperature level, and then moving the predicted curve of the laboratory test upward or downward according to the difference.Supplementary material: Experimental datasets are available at https://doi.org/10.6084/m9.figshare.12268970


1985 ◽  
Vol 6 ◽  
pp. 146-149 ◽  
Author(s):  
H. Murase ◽  
K. Nanishi

The purpose of this work is to study the relationship of energetic and physical properties of polymetric materials with ice adhesion, and to develop the material to prevent ice adhesion. From various parameters of water and ice, dispersion and hydrogen bond contribution of surface free energy of ice were calculated. Using these values and that of contact angle formed between Ice and polymer in the air and also in paraffin, work of adhesion W-πe and W were determined respectively. The difference W-(W-πe) has made it possible to evaluate the effect of surface pressure n on ice adhesion. On the other hand, actual adhesive strength of ice was measured. Some correlations between theoretical and observed values were found. Further, visco-elastic properties of polymers below icing temperature and temperature dependence of strain in the ice/polymer system were investigated. The results showed some characteristics of polymers which are related to molecular mobility at lower temperature, are effective in reducing the adhesive strength to ice.Numerous attempts were made to develop coating materials to prevent ice adhesion. A composite polymer composition, which has peculiar ingredients and structure, was proposed and found to provide the ability for the lowest ice adhesion. Ice preventive mechanism of the film was discussed.


1986 ◽  
Vol 51 (4) ◽  
pp. 362-369 ◽  
Author(s):  
Donna M. Risberg ◽  
Robyn M. Cox

A custom in-the-ear (ITE) hearing aid fitting was compared to two over-the-ear (OTE) hearing aid fittings for each of 9 subjects with mild to moderately severe hearing losses. Speech intelligibility via the three instruments was compared using the Speech Intelligibility Rating (SIR) test. The relationship between functional gain and coupler gain was compared for the ITE and the higher rated OTE instruments. The difference in input received at the microphone locations of the two types of hearing aids was measured for 10 different subjects and compared to the functional gain data. It was concluded that (a) for persons with mild to moderately severe hearing losses, appropriately adjusted custom ITE fittings typically yield speech intelligibility that is equal to the better OTE fitting identified in a comparative evaluation; and (b) gain prescriptions for ITE hearing aids should be adjusted to account for the high-frequency emphasis associated with in-the-concha microphone placement.


VASA ◽  
2020 ◽  
pp. 1-6
Author(s):  
Hanji Zhang ◽  
Dexin Yin ◽  
Yue Zhao ◽  
Yezhou Li ◽  
Dejiang Yao ◽  
...  

Summary: Our meta-analysis focused on the relationship between homocysteine (Hcy) level and the incidence of aneurysms and looked at the relationship between smoking, hypertension and aneurysms. A systematic literature search of Pubmed, Web of Science, and Embase databases (up to March 31, 2020) resulted in the identification of 19 studies, including 2,629 aneurysm patients and 6,497 healthy participants. Combined analysis of the included studies showed that number of smoking, hypertension and hyperhomocysteinemia (HHcy) in aneurysm patients was higher than that in the control groups, and the total plasma Hcy level in aneurysm patients was also higher. These findings suggest that smoking, hypertension and HHcy may be risk factors for the development and progression of aneurysms. Although the heterogeneity of meta-analysis was significant, it was found that the heterogeneity might come from the difference between race and disease species through subgroup analysis. Large-scale randomized controlled studies of single species and single disease species are needed in the future to supplement the accuracy of the results.


2020 ◽  
Vol 22 (3) ◽  
pp. 341-361
Author(s):  
Gonzalo Grau-Pérez ◽  
J. Guillermo Milán

In Uruguay, Lacanian ideas arrived in the 1960s, into a context of Kleinian hegemony. Adopting a discursive approach, this study researched the initial reception of these ideas and its effects on clinical practices. We gathered a corpus of discursive data from clinical cases and theoretical-doctrinal articles (from the 1960s, 1970s and 1980s). In order to examine the effects of Lacanian ideas, we analysed the difference in the way of interpreting the clinical material before and after Lacan's reception. The results of this research illuminate some epistemological problems of psychoanalysis, especially the relationship between theory and clinical practice.


2012 ◽  
Vol 6 (1-3) ◽  
pp. 165-184
Author(s):  
Timothy Beal

This essay attends to a distinction that requires closer examination and theorization in our discourse on iconic books and other scriptures: the difference between iconic object and cultural icon. How do we conceive of relations between the particular, ritualized iconicities of particular scriptures in particular religious contexts and the cultural iconicities of scriptures in general, such as “the Bible” or “the Quran,” whose visual and material objectivity is highly ambiguous? How if at all are the iconic cultural meanings of the ideas of such books related to the particular iconic textual objects more or less instantiate them? These questions are explored through particular focus on the relationship between the particular iconicities of particular print Bibles, as iconic objects, and the general iconicity of the cultural icon of the Bible.


2011 ◽  
Vol 65 (12) ◽  
pp. 1293-1297
Author(s):  
Keiko Hashiguchi ◽  
Takehiro Yoshimatsu ◽  
Masanori Kawashima

Author(s):  
V. Suganya ◽  
V. Anuradha

Encapsulation is a process of enclosing the substances within an inert material which protects from environment as well as control drug release. Recently, two type of encapsulation has been performed in several research. Nanoencapsulation is the coating of various substances within another material at sizes on the nano scale. Microencapsulation is similar to nanoencapsulation aside from it involving larger particles and having been done for a greater period of time than nanoencapsulation. Encapsulation is a new technology that has wide applications in pharmaceutical industries, agrochemical, food industries and cosmetics. In this review, the difference between micro and nano encapsulation has been explained. This article gives an overview of different methods and reason for encapsulation. The advantages and disadvantages of micro and nano encapsulation technology were also clearly mentioned in this paper.


Sign in / Sign up

Export Citation Format

Share Document