scholarly journals Fabry-Perot Cavity Leaky Wave Antennas with Tunable Features for Terahertz Applications

2020 ◽  
Vol 5 (1) ◽  
pp. 11 ◽  
Author(s):  
Silvia Tofani ◽  
Walter Fuscaldo
Keyword(s):  
Technological Development ◽  
Low Cost ◽  
Short Review ◽  
Thz Radiation ◽  
Electromagnetic Spectrum ◽  
Optical Parameters ◽  
Leaky Wave ◽  
Practical Applications ◽  
Fabry Perot ◽  
Thz Antennas

Terahertz (THz) radiation is a very appealing band of the electromagnetic spectrum due to its practical applications. In this context, the THz generation and manipulation is an essential part of the technological development. The demand of THz antennas is still high because it is already difficult to obtain directive, efficient, planar, low-cost, and easy-to-fabricate THz radiating systems. In this regard, Fabry-Perot cavity leaky-wave antennas are gaining increasing attention at THz, due to their very interesting radiating features: the combination of planar designs with metamaterials and metasurfaces could offer a promising platform for future THz manipulation technologies. In this short review, we focus on different classes of leaky-wave antennas, based on materials with tunable quasi-optical parameters. The possibility of producing directive patterns with particularly good efficiencies, as well as the capability of dynamically reconfiguring their radiating features, are discussed by taking into account the risk of increasing costs and fabrication complexity.

New Frontiers in the Use of Microwave Energy: Power and Metrology

1988 ◽  
Vol 124 ◽  
Author(s):  
Ralph W. Bruce
Keyword(s):  
Radio Frequency ◽  
Low Cost ◽  
Short Review ◽  
Microwave Energy ◽  
Electromagnetic Spectrum ◽  
Electromagnetic Heating ◽  
Microwave Radio ◽  
Rf Energy

ABSTRACTThe Microwave/Radio Frequency portion of the electromagnetic spectrum has been used principally for the transmission and reception of information in communications and radar. With the advent of low cost commercial and consumer items (satellite downlinks and microwave ovens) has also come a resurgence of interest in using the energy and properties of these frequencies for other important tasks.The purpose of this paper is to give a short review of the basics of electromagnetic heating and an overview of new trends in this use of microwave/RF energy. These trends can be divided into two broad categories: power and metrology.

4D printing technology, modern era: A short review

2020 ◽  
pp. 92-111
Author(s):  
Khodadad Mostakim ◽  
Nahid Imtiaz Masuk ◽  
Md. Rakib Hasan ◽  
Md. Shafikul Islam
Keyword(s):  
Smart Materials ◽  
Computer Aided Design ◽  
Short Review ◽  
Stimuli Responsive ◽  
4D Printing ◽  
Space Applications ◽  
Printing Technology ◽  
Practical Applications ◽  
Biomedical Technologies ◽  
Novel Material

The advancement in 3D printing has led to the rapid growth of 4D printing technology. Adding time, as the fourth dimension, this technology ushered the potential of a massive evolution in fields of biomedical technologies, space applications, deployable structures, manufacturing industries, and so forth. This technology performs ingenious design, using smart materials to create advanced forms of the 3-D printed specimen. Improvements in Computer-aided design, additive manufacturing process, and material science engineering have ultimately favored the growth of 4-D printing innovation and revealed an effective method to gather complex 3-D structures. Contrast to all these developments, novel material is still a challenging sector. However, this short review illustrates the basic of 4D printing, summarizes the stimuli responsive materials properties, which have prominent role in the field of 4D technology. In addition, the practical applications are depicted and the potential prospect of this technology is put forward.

scholarly journals Chemical Modification of Combusted Coal Gangue for U(VI) Adsorption: Towards a Waste Control by Waste Strategy

2021 ◽  
Vol 13 (15) ◽  
pp. 8421
Author(s):  
Yuan Gao ◽  
Jiandong Huang ◽  
Meng Li ◽  
Zhongran Dai ◽  
Rongli Jiang ◽  
...  
Keyword(s):  
Structural Analysis ◽  
High Efficiency ◽  
Low Cost ◽  
Chemical Activation ◽  
Cost Effective ◽  
Coal Gangue ◽  
Order Kinetic ◽  
Practical Applications ◽  
Detailed Structural Analysis ◽  
Alkaline Conditions

Uranium mining waste causes serious radiation-related health and environmental problems. This has encouraged efforts toward U(VI) removal with low cost and high efficiency. Typical uranium adsorbents, such as polymers, geopolymers, zeolites, and MOFs, and their associated high costs limit their practical applications. In this regard, this work found that the natural combusted coal gangue (CCG) could be a potential precursor of cheap sorbents to eliminate U(VI). The removal efficiency was modulated by chemical activation under acid and alkaline conditions, obtaining HCG (CCG activated with HCl) and KCG (CCG activated with KOH), respectively. The detailed structural analysis uncovered that those natural mineral substances, including quartz and kaolinite, were the main components in CCG and HCG. One of the key findings was that kalsilite formed in KCG under a mild synthetic condition can conspicuous enhance the affinity towards U(VI). The best equilibrium adsorption capacity with KCG was observed to be 140 mg/g under pH 6 within 120 min, following a pseudo-second-order kinetic model. To understand the improved adsorption performance, an adsorption mechanism was proposed by evaluating the pH of uranyl solutions, adsorbent dosage, as well as contact time. Combining with the structural analysis, this revealed that the uranyl adsorption process was mainly governed by chemisorption. This study gave rise to a utilization approach for CCG to obtain cost-effective adsorbents and paved a novel way towards eliminating uranium by a waste control by waste strategy.

scholarly journals Preparation and photocatalytic performance of metallic Nb0.9Ta0.1S2/2D-C3N4 composite

2020 ◽  
Vol 1 (1) ◽  
Author(s):  
Hanxiang Chen ◽  
Jianjian Yi ◽  
Zhao Mo ◽  
Yanhua Song ◽  
Wenshu Yang ◽  
...  
Keyword(s):  
Separation Efficiency ◽  
Low Cost ◽  
Metal Sulfide ◽  
Electron Hole ◽  
Practical Applications ◽  
Energy And Environment ◽  
Photocatalytic Application ◽  
Light Utilization ◽  
Ternary Metal ◽  
Key Issues

Abstract Photocatalysis technology has potential application in the field of energy and environment. How to expand visible light utilization and promote the separation efficiency of the carriers are the key issues for the high active photocatalysts preparation and future practical applications. In this work, a ternary metal sulfide Nb0.9Ta0.1S2 was prepared and used as an electron collector in the photocatalytic application. As a result, the generated electrons are quickly transferred to the surface of the composite to participate in the reaction. It was demonstrated that the photocatalytic activity of 2D-C3N4 was enhanced after the modification of Nb0.9Ta0.1S2. The Nb0.9Ta0.1S2/2D-C3N4 composite material was synthesized by solvothermal method. The composition of 5% Nb0.9Ta0.1S2/2D-C3N4 showed the highest H2 evolution rate of 1961.6 μmolg−1h−1, which was 6.6 times that of 2D-C3N4. The 15% Nb0.9Ta0.1S2/2D-C3N4 exhibited the best activity in Rhodamine B degradation rate of 97% in 2 h, which is 50% higher than that of 2D-C3N4. Nb0.9Ta0.1S2/2D-C3N4 can be used as electron trap to promote the effective separation of electron–hole pairs. This work provides benchmarks in exploring low-cost and efficient cocatalyst.

scholarly journals A Survey on Deep Learning Based Methods and Datasets for Monocular 3D Object Detection

Electronics ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 517
Author(s):  
Seong-heum Kim ◽  
Youngbae Hwang
Keyword(s):  
Deep Learning ◽  
Object Detection ◽  
Low Cost ◽  
Detection Methods ◽  
Future Research ◽  
3D Object ◽  
Practical Applications ◽  
Depth Sensors ◽  
Significant Research ◽  
3D Object Detection

Owing to recent advancements in deep learning methods and relevant databases, it is becoming increasingly easier to recognize 3D objects using only RGB images from single viewpoints. This study investigates the major breakthroughs and current progress in deep learning-based monocular 3D object detection. For relatively low-cost data acquisition systems without depth sensors or cameras at multiple viewpoints, we first consider existing databases with 2D RGB photos and their relevant attributes. Based on this simple sensor modality for practical applications, deep learning-based monocular 3D object detection methods that overcome significant research challenges are categorized and summarized. We present the key concepts and detailed descriptions of representative single-stage and multiple-stage detection solutions. In addition, we discuss the effectiveness of the detection models on their baseline benchmarks. Finally, we explore several directions for future research on monocular 3D object detection.

Non-adhesive lotus and other hydrophobic materials

2008 ◽  
Vol 366 (1870) ◽  
pp. 1539-1556 ◽  
Author(s):  
David Quéré ◽  
Mathilde Reyssat
Keyword(s):  
Solid Surface ◽  
Room Temperature ◽  
Water Repellency ◽  
Short Review ◽  
Water Repellent ◽  
Practical Applications ◽  
Hydrophobic Materials ◽  
Volatile Liquid ◽  
Air Cushion ◽  
The Stability

Superhydrophobic materials recently attracted a lot of attention, owing to the potential practical applications of such surfaces—they literally repel water, which hardly sticks to them, bounces off after an impact and slips on them. In this short review, we describe how water repellency arises from the presence of hydrophobic microstructures at the solid surface. A drop deposited on such a substrate can float above the textures, mimicking at room temperature what happens on very hot plates; then, a vapour layer comes between the solid and the volatile liquid, as described long ago by Leidenfrost. We present several examples of superhydrophobic materials (either natural or synthetic), and stress more particularly the stability of the air cushion—the liquid could also penetrate the textures, inducing a very different wetting state, much more sticky, due to the possibility of pinning on the numerous defects. This description allows us to discuss (in quite a preliminary way) the optimal design to be given to a solid surface to make it robustly water repellent.

scholarly journals Diagnostic Capabilities of a Smartphone- Based Low-Cost Microscope

2020 ◽  
Vol 6 (3) ◽  
pp. 522-525
Author(s):  
Dorina Hasselbeck ◽  
Max B. Schäfer ◽  
Kent W. Stewart ◽  
Peter P. Pott
Keyword(s):  
Low Cost ◽  
Field Of View ◽  
Parasitic Diseases ◽  
Optical Parameters ◽  
Trade Off ◽  
Resource Limited ◽  
Wide Range ◽  
Diagnostic Applications ◽  
Diagnostic Capabilities

AbstractMicroscopy enables fast and effective diagnostics. However, in resource-limited regions microscopy is not accessible to everyone. Smartphone-based low-cost microscopes could be a powerful tool for diagnostic and educational purposes. In this paper, the imaging quality of a smartphone-based microscope with four different optical parameters is presented and a systematic overview of the resulting diagnostic applications is given. With the chosen configuration, aiming for a reasonable trade-off, an average resolution of 1.23 μm and a field of view of 1.12 mm2 was achieved. This enables a wide range of diagnostic applications such as the diagnosis of Malaria and other parasitic diseases.

scholarly journals A 300-GHz low-cost high-gain fully metallic Fabry–Perot cavity antenna for 6G terahertz wireless communications

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Basem Aqlan ◽  
Mohamed Himdi ◽  
Hamsakutty Vettikalladi ◽  
Laurent Le-Coq
Keyword(s):  
Communication Systems ◽  
Low Cost ◽  
Frequency Selective Surface ◽  
High Gain ◽  
Wireless Communication Systems ◽  
Beam Radiation ◽  
Compact Size ◽  
Fabry Perot ◽  
Operating Bandwidth ◽  
Polarization Level

AbstractA low-cost, compact, and high gain Fabry–Perot cavity (FPC) antenna which operates at 300 GHz is presented. The antenna is fabricated using laser-cutting brass technology. The proposed antenna consists of seven metallic layers; a ground layer, an integrated stepped horn element (three-layers), a coupling layer, a cavity layer, and an aperture-frequency selective surface (FSS) layer. The proposed aperture-FSS function acts as a partially reflective surface, contributing to a directive beam radiation. For verification, the proposed sub-terahertz (THz) FPC antenna prototype was developed, fabricated, and measured. The proposed antenna has a measured reflection coefficient below − 10 dB from 282 to 304 GHz with a bandwidth of 22 GHz. The maximum measured gain observed is 17.7 dBi at 289 GHz, and the gain is higher than 14.4 dBi from 285 to 310 GHz. The measured radiation pattern shows a highly directive pattern with a cross-polarization level below − 25 dB over the whole band in all cut planes, which confirms with the simulation results. The proposed antenna has a compact size, low fabrication cost, high gain, and wide operating bandwidth. The total height of the antenna is 1.24 $${\lambda }_{0}$$ λ 0 ($${\lambda }_{0}$$ λ 0 at the design frequency, 300 GHz) , with a size of 2.6 mm × 2.6 mm. The proposed sub-THz waveguide-fed FPC antenna is suitable for 6G wireless communication systems.

scholarly journals Ruthenium Sensitizers and Their Applications in Dye-Sensitized Solar Cells

2012 ◽  
Vol 2012 ◽  
pp. 1-21 ◽  
Author(s):  
Yuancheng Qin ◽  
Qiang Peng
Keyword(s):  
Solar Cells ◽  
High Efficiency ◽  
Low Cost ◽  
Dye Sensitized Solar Cells ◽  
Ruthenium Complexes ◽  
Practical Applications ◽  
Photovoltaic Energy ◽  
Dye Sensitized ◽  
Sensitized Solar Cells ◽  
Excellent Stability

Dye-sensitized solar cells (DSSCs) have attracted considerable attention in recent years due to the possibility of low-cost conversion of photovoltaic energy. The DSSCs-based ruthenium complexes as sensitizers show high efficiency and excellent stability, implying potential practical applications. This review focuses on recent advances in design and preparation of efficient ruthenium sensitizers and their applications in DSSCs, including thiocyanate ruthenium sensitizers and thiocyanate-free ruthenium sensitizers.

Carbon Dioxide as a Carbon Resource – Recent Trends and Perspectives

2012 ◽  
Vol 67 (10) ◽  
pp. 961-975 ◽  
Author(s):  
Markus Hölscher ◽  
Christoph Gürtler ◽  
Wilhelm Keim ◽  
Thomas E. Müller ◽  
Martina Peters ◽  
...  
Keyword(s):  
Carbon Dioxide ◽  
Raw Materials ◽  
Low Cost ◽  
Polymeric Materials ◽  
Short Review ◽  
Chemical Research ◽  
Bond Forming ◽  
Bulk Chemicals ◽  
High Thermodynamic Stability ◽  
Recent Trends

With the growing perception of industrialized societies that fossil raw materials are limited resources, academic chemical research and chemical industry have started to introduce novel catalytic technologies which aim at the development of economically competitive processes relying much more strongly on the use of alternative carbon feedstocks. Great interest is given world-wide to carbon dioxide (CO2) as it is part of the global carbon cycle, nontoxic, easily available in sufficient quantities anywhere in the industrialized world, and can be managed technically with ease, and at low cost. In principle carbon dioxide can be used to generate a large variety of synthetic products ranging from bulk chemicals like methanol and formic acid, through polymeric materials, to fine chemicals like aromatic acids useful in the pharmaceutical industry. Owing to the high thermodynamic stability of CO2, the energy constraints of chemical reactions have to be carefully analyzed to select promising processes. Furthermore, the high kinetic barriers for incorporation of CO2 into C-H or C-C bond forming reactions require that any novel transformation of CO2 must inevitably be associated with a novel catalytic technology. This short review comprises a selection of the most recent academic and industrial research developments mainly with regard to innovations in CO2 chemistry in the field of homogeneous catalysis and processes.

Sign in / Sign up

Export Citation Format

Share Document